ABOM79 Shows How To Restore and Protect Rusted Tools & Objects with CRC Evapo-Rust and Rust-Block

CRC Evapo-Rust® Removes Rust to Bare Metal. Evapo-Rust Rust Remover will easily remove rust without scrubbing or sanding to give your treasures new life. Our rust inhibitor will keep it that way.
- Benefits of Evapo-Rust® Rust Remover
- Removes even heavy rust completely to bare metal
- Non-corrosive
- pH Neutral
- No sanding or scrubbing required
- Reusable
- Water soluble
- No fumes or bad odors
- Non-flammable
- Will not harm unrusted steel
- Safe on other metals
- Will not affect plastic, PVC, Viton and most paints
- Just soak, rinse, & reuse!
Learn More: www.evapo-rust...
Where to Buy: www.evapo-rust...
CRC Evapo-Rust Rust-Block Water-Based Rust Inhibitor Prevents Rust for Up to 1 Year
CRC’s rust blocker is a water-based rust inhibitor that works on all ferrous metals and is ideal for home or shop use.
If using Rust-Block on cookware, ensure to wash off the Rust-Block with fresh water. Then wash with soap and water. Then re-season with oil before cooking.
- Protects from rust for up to 1 year
- Non-corrosive
- Non-flammable
- Oil free
- Economical
- No foul odors or strong fumes
- Water soluble
- Indoor use only!
Learn More: www.evapo-rust...
Where to Buy: www.evapo-rust...
More Evapo-Rust Products:
Rust Remover Gel: www.evapo-rust...
Thermocure (cooling systems): www.evapo-rust...
Website: www.evapo-rust...
Follow us on KZbin at @CRCAutoUS / @Abom79
Follow CRC on Facebook: / crcauto
Follow CRC on Instagram: / crcauto
Follow CRC on LinkedIN: / crcindustries

[@JohnWCH]

Dear CRC social media person, i'm a complete neophyte when it comes to all this kind if stuff and i ONLY use CRC stuff because Abomb says so. Brake kleen, evaporust, the bed rust prevention spray, all purchased because i saw it on Adams channel. You ad money is working.

[@SteveColluns-hm2xx]

Dude…You might want to wipe your nose off after that pathetic display of brown nosing…

[@mayshack]

Nobody shills like Adam Booth!

[@northernmetalworker]

Really cool seeing crc and abom working together!

[@RGSABloke]

Adam, please don’t listen to the folks who criticise you. This is a fantastic symbiotic relationship with CRC, your credibility when endorsing products is considered to be really credible as folks know in the community you would NEVER endorse a dodgy product. Yes other products are available and that is great. However, I really trust your judgement. CRC have found a great partner here. Kindest regards from Bonnie Scotland. Joe.

[@t1259sw]

Another product is dark molasses, the cheap kind used by hunter to bait deer. I mix it one cup to every gallon of water. You won't be disappointed, if your taking rust from wrenches that have been zinc coated just check on them but cast parts just let them soak. The molasses will not remove the black hardened marks on tools that have been heat treated and hardened.

[@GotNoStrings]

You know what Abom needs more of...more vises 😂

[@minglim-pollard1167]

Your perforated parts bucket is a very rarely seen, appreciate the very professional and informative process

[@talltimberswoodshop7552]

I'll bet the rust block on the skillet makes your eggs taste yummy.

[@ron827]

$1300 worth of Evaporust in the tank! VERY good sales pitch for Evaporust.

[@spfldmilkman]

Miss the old day of machining and turning, seems like a use car salesman

[@cdnaudioguy]

Adam knows his stuff! Can’t wait to see his Slap Chop 2.0 videos! ;-)

[@BaseballNut719]

Watched the video solely because of Abom. Great video!

[@marionake5618]

As an alternative diy use : 1 liter water 100g citric acid 63g baking soda Little fabric softener

[@jasonpavlik4904]

I already use evaporust. I will give rust block a try.

[@izzynutz2000]

As a hobby I dabble in vintage Lionel trains and often times when I go to shows or places like that they have extremely rusty old track or rusty old pieces an evaporite has saved many many many that I have bought for cheap and or gotten for free it's a great product and I highly recommend it and I love that Adam is endorsing it for them because it's fact if he likes it then he'll promote it well done Adam

[@garyjones2582]

Great video, thx for sharing...

[@jamesspash5561]

Vinegar works pretty well also.

[@anthonyrivers8395]

Love me some abom ❤. Can’t live without my CRC. I will pick me up some of Evapo - rust . Love the team up between you two.

[@mingthemerciless6855]

Great presentation. The product works as advertised.

[@jamesparker1185]

Abom is the best. Using crc strictly because you sponsor him.

[@ferenctaisz449]

I use white vinegar. It does the same thing for the fraction of the price.

[@spfldmilkman]

Price is no deal for Adam, it's given to him plus a check.

[@BrainHurricanes]

The only problem is that vinegar eats the non rusted parts also

[@dan4653]

CRC, Why has evaporust doubled in price since you bought them?

[@bluehornet6752]

Great video--been using the stuff for years, and recently started using some of the other CRC products as well.

[@willb3018]

Found an old very large Chanellock slip joint plier (I think the largest they make). Would never have bought because usually don't ever need anything that big but for free it was a good deal. Problem was, the slip joints were "welded" shut with rust. After cleaning as best I could, about 24 hours in Evapo Rust and they were free. After clean up, I just sprayed and wiped with WD40. Got a bunch of other badly rusted US made tools including smaller Channellocks from same source and applied same treatment. Highly recommend Evapo Rust. And it is reusable! Nice succinct video.

[@CRCAutoUS]

Thanks for your feedback! I love Evapo-Rust. Next you need to try Rust-Block to protect the metal after.

[@SuperB776]

@@CRCAutoUS I have an old lathe with really stubborn rust. Can I soak rags with evaporust and drape on the lathe ways or other surfaces as I can't submerge it?

[@CRCAutoUS]

@@SuperB776 You can cover the rusted area with soaked rags or towels. Or you can use Evapo-Rust Gel that will cling to large and vertical surfaces.

[@SuperB776]

@@CRCAutoUS That is awesome...I will look for the gel version...Thank you...b

[@anthonyrivers8395]

Gel 👌

[@jerryshay221]

I agree this stuff works.

[@isbcornbinder]

I use Evaporust in my ultrasonic parts cleaner.

[@v8packard]

How does that work out?

[@glenpaul3606]

It seems Evaporust is ridiculously expensive ($55 per gallon on Amazon) and over rated. Ospho is much less costly, $20 per gallon or less and works better and faster. When living on the Gulf Coast, I bought a 500 gallon gas tank for my boats. The tank was totally rusted. I brushed off the loose rust, sprayed it with Ospho (took about 1/2 gallon) in the morning. That afternoon I spray painted the tank and frame with Rustoleum paint. After 5 years while only 20 feet from saltwater the tank was still perfect...not a spec of rust anywhere. The whole process cost me under $30. Ospho works great, been using it on everything that rust for nearly 25 years now.

[@tomsuica8731]

you are killing me with the camera cuts write a script read it once an take the shoot. Also take the damn safety goggles off you are just unscrewing 2 bolts with the adjustables. Did youtube osha just visit or something Bwahahahaaha Ayoh!

[@mikesneden1599]

I work at an export company in detroit and freight up and preserve mostly automotive manufacturing equipment for shipment overseas. We use a product called cortex 50 gallon drums about 1500$ but we aerolize itn through a gun.This stuff cleans up with mineral spirits and protects against the toughest of sea conditions

[@michaelweilmuenster5754]

I absolutely love evaporust! It's the best rust remover I've ever tried. I restore vintage motorcycles and it's made the process so much easier. Especially cleaning the inside of gas tanks. I used to put nuts and bolts in and shake them for hours with a toxic mix of chemicals. Now I just fill it up with evaporust and let it sit for a day and they look like new. Best part is its reusable. I didn't know it comes in a 5 gallon bucket. I'm going to have to try and find one. Thanks crc!!👍

[@CRCAutoUS]

Thanks for the great feedback! Evapo-Rust is available in many sizes. You can check out the Where to Buy on our website: www.evapo-rust.com/where-to-buy-evapo-rust-remover/

[@bryco32]

OMG! I would be over the freakin moon owning that vise! I really need to get off my arse and find a good antique USA made vise.

[@NoferTrunions]

Rust Block: what is it? Is it a film or does it react with the surface perhaps making a phosphate or depositing zinc? While EoR does not touch the metal, it leaves the surface rather reactive perhaps leaching out beneficial oxides which keep the surface from rusting when put on a shelf. After doing some transmission gears, they flashed to a light golden soon after dried off.

[@nicholasfranks2616]

Awesome video Adam, can we just spray evapo rust in bigger parts for the folks that dont have an IBC tote at home ?

[@CRCAutoUS]

Cover the surface with towels soaked in Evapo-Rust, and cover in plastic, or try Evapo-Rust Gel that will cling to large and vertical surfaces.

[@barbeonline351]

@@CRCAutoUS FWIW, I tried the towel/ cling wrap on some large flat objects. The results were very disappointing. A tray, lots of towels, carefully sealed, saturated....and uneven results across the surface, and of course indentations were not reacted at all.

[@kimroyful]

Can you add water to the remover?

[@RobertKohut]

Great job ABOM!! 🙂

[@bradanderson1627]

Drying them off was well damn the fastest I’ve seen Adam give’n ER. 😂😂

[@MrBillUp]

Its great if you are given Evaporust for free to do all these jobs. If like me you're not sponsored, I would need to sell my kidney to afford 50 Gallons. At $26 for 1 Gallon I'll stick to DEOX C. It removes more rust, lasts a lot longer, and is a quarter of the price.

[@jtl1274]

Where did you get that parts bucket

[@carlbyington5185]

Glad you cleaned the spring calipers.. cause that's your ONLY pair, LOL

[@mjd9813]

i seen it with a like for ABOM79

[@TheBeanerb2]

After using and rinsing, how long before flash rust is a concern.

[@MrMojolinux]

Hey Adam, why don't you show trying to remove rust/stains on some "Precision Tools" ? You know, common every day used machinist tools that need to be "RESTORED"! Precision Tools like various Micrometers, Combination Squares, Scales, Precision Squares, V-Blocks, Angle Blocks, etc

[@thewholls7176]

Good job mate, I have found that doing smaller pieces using evaporust. It works much quicker and arguably better If you heat it up in the microwave to sort of about 60° C and it will clean up parts in an hour or two instead of overnight works much better when it’s hot. Maybe give it a try. All the best from Melbourne Australia

[@johac7637]

I use a crock pot, and also a deep fryer, helps a bunch.

[@truckguy6666]

THE GOAT

[@robertghorne8607]

We'll do it. 👍

[@cjb1708]

I have been using a brass brush immediately after removing tools from the EvapoRust. Should I continue doing this, or am I damaging anything?

[@thomasmichael7552]

I wouldn’t see how. Brass is softer than other metals. I could be wrong though.

[@turtuhl]

I like those absorbant shop mats you used. Where did you get them?

[@irocz235]

I use an induction hotplate to bring the temperature of the evaporust and parts up to 100°-125° fahrenheit for 15-30 minutes, seems to speed the process. Keep it covered so you aren't loosing any thing to evaporation.

[@1911wood]

I like the fact Adam isn’t going to give anyone the nod he doesn’t believe in. Only way it could be better is Abby making an appearance. Maybe one of those spokesmodel poses she does so well. Adam is evaporation of the liquid in your tank a concern?

[@TheJmich2001]

keep in mind you have to be as strong as Adam to lift a vice into that tank!!!! Adam has been an inspiration to me and so many others. And I've always loved CRC from the 5-56 days!!! NJ

[@morgan5941]

Chain falls are cheap and saves the back.

[@carlbyington5185]

Hi Adam... on your little plastic, red top bowel, I found out, that you just push the center of the lid and it locks down, cool, huh?

[@Jason-7212]

I wonder how well this would work on firearms. I have some firearms that were brought to me for cleaning that the owner had left in her garage for several months. Some have extensive surface rusting almost to the point of pitting. Was considering electrolysis, but have been advised by some gunsmiths that there can be issues of weaking the metal by using this method of rust removal.

[@2loco]

I'm actually blown away with the results. This evaporust stuff is amazing. Can it be used on old guns?

[@CRCAutoUS]

Yes it can be used on guns. Evapo-Rust is safe on all metals.

[@barbeonline351]

Some situations not covered that I have run into: 1. Isn't there an instruction/condition/recommendation to avoid contact with air? Obviously that tank doesn't respect that instruction. 2. How do you tell when the solution is spent? The volume does have a service life, correct? A finite amount of reaction it can effect? 3. And how about technique for larger objects for us folks who can't justify over $1000 of solution and 25 sq.ft. of workspace to house a vat like in the video? For instance, I had a Weber grill where that bottom bolt holding the vent fins to the handle was fused with rust making normal rotation impossible. Any suggestions (towels, sponges) of how to work the product on a section of a large object? 4. "Discoloration"-- Everthing seems to come out with, what to me, appears to be a unique flat black patina, not the look of steel I am used to. Am I wrong? Future video ideas? I have been pretty happy with the product. I expect my next purchase will be the 3 gallon size (though the recent 25% price increase on Amazon sucks). But I want to get more out my usage.....

[@CRCAutoUS]

Good morning. We have many options to assist with your questions. 1. Check out the FAQ on our website. www.evapo-rust.com/rust-remover-crc/ 2. Check out this other video from abom79: kzbin.info/www/bejne/Y3zRk6WHm7-JjLssi=M79BpnFf9Zs1VO8Y 2. Contact [e-mail]

[@mikehartmann5187]

Evaporust works, it’s relatively expensive though.

[@danvanhoose6783]

Iron skillet safe to cook in?

[@CRCAutoUS]

It is safe to use on cookware. Ensure you wash the product off with soap and water before you season or cook with the pan.

[@garydunscombe1762]

Justwondering what happened to the property you bought

[@DelTapparo]

Looks like your grass under your sawhorse doesn't like Evaporust and other chemicals.

[@joeheilm]

Can you soak tools too long in evaporust? I usually only work in my shop on the weekends. Consequently, i would leave stuff in for 5 to 7 days.

[@CRCAutoUS]

It will depend on the metal. High carbon parts should not be soaked longer than necessary, as most likely the metal will darken in colour. The darkening does not have an adverse affect on the metal. It merely represents the movement of carbon from the interior of the metal to the exterior of the metal. If you have any detailed questions, please don't hesitate to contact [e-mail]

[@joeheilm]

@@CRCAutoUS thank you very much for the response. Cheers

[@galileo_rs]

Buy citric acid (food additive), dump it in hot water and you are good to go, no need for expensive products.

[@romaneisner798]

Try the laser rust remover, you will never use chemicals again😮😊

[@BrewPub]

99% of folks can't afford that. I looked at a new one at auction, but that sold for $290K before adding in buyer's premium and sales tax. This was a 1000w German machine, so there are much cheaper machines out there but nothing for less than $50K that is quality.

[@mikemcelrath7721]

Using it on frying pan. No way. Vinager works just as well lot less money. Must be a commercial

[@maxxmich]

now u can't use that cast iron pan.......

[@kennedykhoma1115]

This is amazing method and product please just prescribe for me this type of chemical

[@musoangelo]

For all the cool tools that you have, I don't recall you having a bead blast cabinet. For all your experience I'm sure you must have use them in the past. Is there a reason that you don't have one?

[@MyTubeSVp]

They didn’t give him one. 😉

[@abitoffcenter383]

Ya know what I didn't hear? The firetruck!! Those that know, know. 😆😁

[@nathanokun8801]

I was informed that Evaporust and magnesium do not mix. True?

[@CRCAutoUS]

True

[@halfnelson6115]

That paint came right off when you hit it with the hose. Huh.

[@AliAli-zv5ot]

👍👍👍💪

[@nicholasmistry4954]

um, is Rust-block food safe?

[@CRCAutoUS]

We suggest that you wash off the Rust-Block before seasoning or cooking.

[@judelarkin2883]

How does one dispose of 50 gallons of Evaporust?

[@CRCAutoUS]

Hi there. All used and unused product should be disposed of in conformance with local, state and federal regulations

[@MyTubeSVp]

@@CRCAutoUSThat’s a Microsoft answer : both totally correct and totally useless.

[@opieshomeshop]

*_Evaporust is fine and I use it however.. HOWEVER, using it on cooking items? NO! Not a chance. And then rinsing it and letting flow into the ground? NO! Sorry. Come on now. Serious?_*

[@grimlock1471]

Does that Rust Block affect later attempts to paint it?

[@CRCAutoUS]

You will need to wash off the Rust-Block before painting.

[@grimlock1471]

@@CRCAutoUS So I could go right from the bath, to rinse, dry, and immediately paint?

[@CRCAutoUS]

@@grimlock1471 As long as the piece is completely dry, it is not a problem to paint it. Ensure the Evapo-Rust is completely washed off, along with any other film or oily substance.

[@CRCAutoUS]

@@kevinroberts9394 The Rust-Block needs to be completely washed off before you start seasoning the cookware or start using it for cooking.

[@mikek1444]

I don't i would use the rust block on any cook ware. It is not listed as a food safe product.

[@SteveColluns-hm2xx]

Yea right! Wait until people see this and use it on their cookware. When people start getting I’ll and suing ABOM and CRC for advertising this product as food safe.

[@JohnAho]

For cookware you can just use canola oil in a spray can with a good wipe instead.

[@zippysearle]

all the tools at his disposal yet he doesn’t do any proper engineering 😂😂😂

[@StockbridgeAmphitheaterDotCom]

It got the rust off. But they're still hanging too low.