Creality Falcon 2 40W Laser is DESTROYING the competition when it comes to cutting. Impressive laser

[@pbgrafx]

The Creality Falcon is amazing. Thank you for the demo. Love your living room!

[@truthbetold2914]

WOW! You look great today! It looks a bit chilly there.....

[@johnjacobjingleheimerschmi9997]

🤦‍♂️

[@MrLuvFlorida]

Great Review… I love your detailed and honest opinions.

[@Bax60]

You should he a narrator. Your wonderful voice and accent is very soothing

[@woodworkingwithSkyler]

:) thank you

[@hi-tech-handyman]

Great job! I love that room you finished up in. Nice style.

[@Wood-bw5kq]

Thank you. Very insightful and helpful. Much appreciated.

[@flashwashington2735]

Nice demonstration by superior presentation. Thanks. God bless.

[@kentharris7427]

You have me sold on the Falcon 2 40 Watt laser. I make custom clocks for friends and for Family during the Holidays. I currently have a Longmill CNC router which has an accuracy of a tenth of a millimeter. I cut 1/4" plywood with the router and make a hole in the middle for the clock shaft. I modified the CNC Router so I could attach a 20 Watt laser to it. The laser is good for engraving but the only material it can cut is felt, doesn't matter how many passes, even on 3 MM plywood it is not able to cut through. Since the Falcon 2 can cut and engrave at the same time. Looks like a perfect laser for the job.

[@woodworkingwithSkyler]

You will love the cutting ability of creality! You can cut half in hard wood with no problem. Even 3/4 in poplar it can cut in one pass

[@gorrammudder1600]

7:48 The only time I turn off air assist is when I'm cutting paper or vaneers for inlays. This prevents small bits from being blown away and possibly into the lasers path.

[@woodworkingwithSkyler]

Yes. Totally agree

[@ChrisBloom]

great advice on the air-assist. Thank you. Setting up my new S1 this weekend from your affiliate link 🙂

[@woodworkingwithSkyler]

Fantastic! Let me know if you have any questions

[@mcegood2210]

I'm curious if you have tried cutting any metal with this, such as thin brass, copper or aluminum.

[@ljgault]

I enjoyed the review. When you say a number and speed in your reviews are you using inches per or MM per Sec/Min.?

[@pix23]

Where did you find detailed information about the laser spot / kerf sizes of the lasers in their various modes? I haven't had any luck getting more than one dimension

[@JarppaGuru]

10:31 that will be like butter its will cut 16mm wood

[@marbert9012]

Hi, I understand that you avoided more passes to test the laser power in your review. I found that in normal operation it's not recommended to keep 100% power for long time to extend laser life and reduce overheating. Do you have any practical suggestion for power/speed/passes in typical, extended working conditions? Thanks

[@dougk5456]

Great review! When I tried to look at the warranty it was stated that you would need to contact the manufacturer directly. Did they share any information on the warranty with you?

[@littlejohnny3215]

Thank you for this very informative review. So with everything you said about cutting vs engraving, I’m interested in doing more wood inlay (3/16”-1/4” thk.) work, with the occasional engraving on various materials. Can you show some close up views of the engraving quality of this machine in another video?

[@woodworkingwithSkyler]

Hi Johnny. I gave away my creality machines, so I won’t be able to show you close ups. I use my lasers mostly for inlay and I really like Xtool and longer for that

[@DwightStebner]

what is the work area size of this

[@perjian1697]

Just tried the coupon codes and says they've expired already. 😢

[@SirMiddo]

Great Review!

[@woodworkingwithSkyler]

Glad you enjoyed it

[@GroundedFlyboy737]

Skyler, I'm glad you mentioned the inferior engraving prowess of the Creality machine. While watching your demonstrations, they weren't half as nice as the demos you did with the XTool S1. Stupid question but if you turn down the "power" of a 40W laser, does the kerf get correspondingly smaller as well? Or is it always the same for that particular laser module much like a saw blade. Thanks! (What else are you making for your holiday tables?)

[@GroundedFlyboy737]

Okay, nevermind.

[@jamesewing5863]

I'm looking for a laser cutter/engraver that will give me the best photo engravings on wood or metal and also cut .05mm steel. However, when i cut the VERY thin steel sheets, I need to cut 16mm x 4mm sections. Do you know of any that can do this with that type of accuracy?

[@woodworkingwithSkyler]

xtool will do great with engraving and will be very accurate. I never tried to cut steel, so i dont know about that

[@cbulorg9582]

Did you use the "Lower the Focus" option on the S1 cutting Test?

[@woodworkingwithSkyler]

No, I did not.

[@dennishall9260]

You have demonstrated several laser cutting/engraving machines... in your opinion, factoring cost and capabilities, which machine would you suggest to a first time buyer?

[@woodworkingwithSkyler]

Xtool S1 for new or advanced user. Unless you are purchasing a laser strictly to just put your logo on things. Then a cheap Longer ray5 10W will do for around $300

[@howlinmad4208]

Nice to see a straight answer😂

[@ivantheterrible7377]

Doesn’t seem like your code is working. Idk if it’s because of the sale they have now

[@norm5785]

Nice multi purpose laser. Thank you for sharing. Everyone stay safe, happy and healthy. From Henrico County Virginia

[@woodworkingwithSkyler]

Thanks Norm

[@PencilParasite]

Better than S1 ?😮

[@woodworkingwithSkyler]

Cuts better but overall S1 is a better machine. At least for me

[@I-LOVE-EARTH]

So it destroys the xTool...nice!

[@woodworkingwithSkyler]

Xtool is still better all around laser

[@RamiroRamirez62]

❤ Good Morning great demonstration of this Lazer. ❤ arăți foarte bine azi 🥰

[@woodworkingwithSkyler]

Thank you

[@RamiroRamirez62]

@@woodworkingwithSkyler your welcome 🤗

[@Bax60]

@@RamiroRamirez62 Sie sieht jeden tag gut aus ..bruder

[@RamiroRamirez62]

@@Bax60 Ja, ich weiß, deshalb schaue ich mir ihre Videos auf. Danke, mein Bruder

[@JarppaGuru]

i give them money. they send me too xD and yes they want sell it to me -20% thats normal they want. if someone buy 100% then they make more profit

[@robertbenzon6941]

Hand tools are better and take a lot more skill. All a laser engraver does is make charcoal.

[@Steve-nk5sz]

Ohh WOW 😳 look at those