Creality K1 Becomes my New Favourite FDM Printer

I promised creality i would make a remote control thingamajig for them if they sent me a machine but i ended up making a light instead. Oh and I also show you the new creality k1
To buy a creality K1 click here : shrsl.com/4afwh
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ US Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/3M46sUw
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
🖌️ UK Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/491selO
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my KZbin channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected

[@smashinggaming336]

You should print one of your models off it. I have the same one. Would like to see how you transformed fdm and make it come alive like resin!

[@mitchellkruszyna109]

I purchased an Ender printer a couple years ago. I never finished building it, so I gave it away, this printer in your video is helping me overcome my hate for filament printers!

[@mbeining11]

Ha-- i did the same thing with not seeing/removing that last bit of black styro from under where print bed, until it started its checks

[@TK-421_66]

I have a K1 Max and it is great. I use it a lot for statue bases. Saves time and resin and especially if the base is rock you can get away with as much filling of layer lines as you need. Once it is painted it is all rock. Only bad experience I had was the door literally exploded first time I touched it but that is a shipping issue. If you custom mount the filament off to the side or above the machine the rear mount issue goes away but I agree the placement on the machine is weird.

[@I000I]

Creality Quan! Nooice!😆 You are actually gave me some ideas about LED lightning! I can do it with ma Quan! 😎

[@GrafAndrzej]

As usual, fantastic video!

[@mykyrox]

That break seems to be an issue that happens with other KZbinrs

[@darthvaderginsburg4694]

Words for Gran. And great justice!

[@Groundeffected]

😂 thanks dude

[@TheMadmichel]

I wish I didn't have issues with my k1 max 😢 glad yours is serving you well.

[@Groundeffected]

I got the smaller one, Kwan and so far he’s behaved himself. Hopefully you can get yours to knuckle under soon!

[@philfoofighter]

Another bonus video!!! I like it

[@Groundeffected]

It’s out of hand right?

[@LoneYukon]

as this is N7 day, do/will you have/do any Mass Effect figures?

[@Skade_Outdoor]

The machine looks sick!

[@Groundeffected]

It’s pretty good looking. So far it’s behaved itself so I can’t complain!

[@1topgumpilot867]

Lets hope you are right re batch issues. Oh and BTW you make it look dead easy painting and building, im still trying to get my head around getting a model on the plate, without it being too enormous (only have a Mars 2) LOL

[@beyondoriginality]

I use the bambulabs x1c. Witht he AMS, it about $1000 more. Would need to see a comparison of each to check quality.

[@Groundeffected]

Well if it’s a grand more then i would say it’s probably not a a comparable machine. But also I don’t have a Bambu so I can’t compare either as far as fdm machine to do the odd bits I need around my shop it’s more than adequate for that 😊

[@beyondoriginality]

@Groundeffected Only reason I ask about a comparison is that it looks like Creality started to take pages from bambulabs about the enclosure and the camera inside the chamber. The way you described it, it feels like a budget friendly version of the x1c with minor issues. Not trying to flex here, I just got tired of printer power supplies burning out and parts going bad after a small amount of uses.

[@Groundeffected]

@@beyondoriginality honestly I wish I could tell you more my dude. It does feel like a budget friendly version of them bambu machines. But I don’t know enough to really compare them I wish I did then I could answer you.

[@beyondoriginality]

​@Groundeffected well if you are interested, we can both print the same file with the same settings respectively. I can send you the print and you can let me know what you think? Just an idea... I did print alot of articulating skeleton hands.

[@1topgumpilot867]

Must say a good friend of mine has one of them K1's, he has a good few issues with parts and such, M board replaced twice, feet broken, door broken (when received). when it does work its twice the speed of my Artillery SW. Fortunatly hes a genious with electronics and was able to change out the boards. Food for thought.

[@Groundeffected]

There was a first batch released that had some issues and what I was sent was apparently the new batch. I’m not 100% sure as I am a typical male and when I’m being told about a printer or new toy I am already interested in then my mind is like porridge when the rest of the info is explained lol. I was meant to get it a lot longer ago but they delayed and sent me the latest version not sure if those issues were fixed, so far I haven’t had any of those issues only one was the gear in the extruder and I’m sure I broke that being a gorilla hand.

[@fuba44]

Can you use it via octoprint?

[@ITzGunDam]

I've gone and ordered myself a k1 speedy today. Hopefully, I get beautiful prints like yours as sadly iv gone through 6 fdm printers already that have all failed me within 6 to 7 months and yes ill say it again iv had 6 in the space of that short ass time because Most of them i got have come with z banding, but fingers crossed this beautiful don't have any of that as iv just sent 2 elegoo neptune 4s back a normal 4 and a pro version because they are both not that reliable on my opinion anyway but iv got high hopes for this one 😶‍🌫️

[@KANIVERSE]

where is you're shop?

[@tomicooltomi]

I've heared a lot of negatives with this printer, especially with the first batches. Did the fix most of the problems, e.g. with extruder, hotend? Is the Speedy the same as the normal K1, just the fixed version? 🤔

[@CheweeNico]

Great video !

[@joseanrodriguez2005]

are this machine heath (i have kids ) save like if i have in my apartment is not like turn on car in close room ?

[@Groundeffected]

It’s more safer than resin. Depends what materials you print. But an open window would be bough to keep air quality good I’m sure. Also I’m not a doctor or scientist so I don’t know the real answer

[@tbrew1]

Hi Pops!

[@killer-bv7xx]

Looks cool .

[@Groundeffected]

It is pretty gangsta

[@countrystrong899]

Yea but whats your best?

[@chrisSosa1]

Which one do you recommend for to print mini action figure statues?

[@williamrodriguez1150]

Quick question do you know a website or someone that does custom 3d printer file. I have some ideas that I would like to do I just need someone to make the files for me.

[@kylehardy946]

I'm hoping to get a Kuan Max soon

[@Groundeffected]

Oooh!

[@countrystrong899]

I want to know about your anycubic resin printer? How well does it work

[@danieIlondon]

QIDI X MAX 3?

[@423carter]

Just so anyone that does not already have this the camera does not come with the machine. You have to buy separately.

[@rodiculous9464]

Man jeremy hambly sure has a strange sounding accent lately

[@cabe_bedlam]

"Mr Groundeffected" wait, they don't call you Dad?

[@Groundeffected]

Don’t tell your mom!

[@LoneYukon]

nice! more lights to blind you in your eyeballs!

[@Groundeffected]

Exactly!! I love being blinded by the lights!

[@darkquail2003]

quasson, meet the quan.

[@docburn6189]

So i should get a Kwan

[@Groundeffected]

You can click any of my affiliates on Amazon then look for and black Friday deals or see what’s on the webstore through the link in my description. I hope your kwan is as well spoken and dressed as my kwan 🤣

[@SooperBeez]

why not k1max

[@Groundeffected]

When I’m offered stuff to try I always feel guilty and never take the biggest one lol and always kick myself later. I was trying to be polite when they asked me if I wanted to do a video. I’m just stoked to be able to work with the companies I like in the first place.

[@WinstonCorneilius]

I have the Halot pro and I use it to death…any problem I’ve had has been my fault. I was looking at getting this. Lol for calling it Kwon

[@Groundeffected]

Kwan is my new pal in fdm crime haha

[@coolemur976]

I will never understand why people still using USB-A instead of USB-C in their products

[@MrHans-iy5lq]

Cause usb a is the most wide used formats for pendrives?

[@PedroGomes_27]

Because no one uses that and everyone uses WiFi, so is cheaper for manufacturing and no one cares.

[@Eskoxo]

Can get it at microcenter for $350 but i would also get a better base plate that does not need glue and if want can root the device and make it a bit better too.

[@mechanical_bob6591]

apparently you got a GOOD Quality one. Crap shoot. much like original ender3 days.

[@Groundeffected]

I heard there was an update I honestly should know more but I don’t sorry dude. Mines been alright. Does what a fdm machine does. Mostly just sits there till I need something out of plastic 😂

[@jmelwak3]

Nope no more creality for me😅

[@hicontrast]

First