Mixing candy2o for Airbrush & Spray-Gun Painting

[@orion-ng5yp]

Brother honest to god you are the only guy in all KZbin that I can say that explain this with passion!!!! Good luck God bless & stay safe. 👍👍💯💯💯💯

[@CreatexColors]

Thank you! We sincerely appreciate your kind words.

[@theintake8961]

These videos are so good Chris! Thanks for taking the time to show the differences 😎👍

[@jacobthomassen5261]

These videos dude... Absolutely priceless! Besides being extremely thorough on how to mix, what to expect, comparing products using different tools etc - I really appreciate the pace which the information, walkthroughs, advice is conveyed - giving us the chance to keep up and follow every step of the process.. Seriously, watching these videos, especially when it's new series or alternative ways to use "older" products - makes you feel like you've already have the experience yourself... Yeah, I know how it sounds - it's nonetheless the truth =D.. Thx man!! Honestly - I've already tried the 4050 in pretty much every aspects of the paint process and It's definitely my "go to" replacing the 6000 "transparent sealer" in 8/10 cases.. Both are extremely versatile when painting or processing 1:1 props made of fiberglass or 3D print - printed in different types of filament.. Thx again =)

[@CreatexColors]

Thank you Jacob. Kudos from fellow artists who appreciate the nuances of the paint process being focused on is very rewarding and motivating. We'll continue to make these videos knowing that they're helping explain not only our new products but older products as well as technique. Best Regards, Createx

[@kylebaker5982]

Im just getting into this just watched ur video and it was very helpful to me for just learning I didn't no u had to even mix it with different things. But just got some uvls gloss, satin, and matte, some reducer and candy 2o colors and can't wait to try this out thank you for the tips and thanks to createx for making fantastic paint awesome products as well. I ordered some candy 2o got a bottle of tequila yellow and it looked like play dough in it not sure what happened but I emailed createx and told them and not only did they replace the bottle but sent me 4 other bottles of some other products of theirs so im very happy with my experience, so thank you createx

[@deigo2629]

It would be really awesome if you linked every item you use in each video .. it can be difficult to track each item down individually

[@Smile-N-Bear]

Your knowledge to us is invaluable! I love the paint! Another excellent video!👊

[@CreatexColors]

Thank you

[@jimkaminski871]

Love the videos Chris I use an airbrush exclusively so I really enjoy the videos focused around using an airbrush. I’m a visual learner so these videos are very helpful. I would love to see the thickness or viscosity coming off the stir sticks for different applications. Again I’m a visual learner and I don’t have the ratio cups. Keep up the great work! Jim

[@CreatexColors]

Thanks, and a mixing cup isn't really required as our ratios are general starting points; adjusting viscosity so it works best for you (atomization & flow of paint) is what matters most.

[@Jarhead1313]

I wish this guy would do an RC body demo using Createx Candy Paints, from start to finish lol.

[@CreatexColors]

Reverse painting a candy2o color will not produce as deep a finish as is created by top-coating the candy2o with a gloss clear, so our videos showing how to paint with candy2o can readily be translated to painting a polycarbonate RC body, kzbin.info/www/bejne/g3qwnYttbaeXjpY. Make a few test pieces comparing the two. Thank you.

[@cameronyoung2004]

Great demonstration! Im glad you did a review on the 4050 and the candy. This will help me greatly.

[@CreatexColors]

Excellent. Glad this helped!

[@jzghostrider66]

I love these videos. I have some Createx paints in my stash. I'm a model builder and want to experiment with them for modeling but I'd also like to just airbrush if I ever get my depression sorted out. The audio is hard to follow I hope you address that. Its hard to hear what you're saying. I tried Createx paints decades ago and had horrific luck with them. This was LONG before the days of KZbin and I didn't have Iwata airbrushes in those days. I had those horrific Aztec airbrushes that just didn't cut the mustard. NOW I have ALL Iwata plus one Grex brush in my stash. I'm gonna give these another go.

[@colestaples2010]

That 4050 looks amazing

[@CreatexColors]

thanks!

[@h8tnlife]

Good to know there is an alternative to the 4030...

[@CreatexColors]

4050 works much better with candy2o. Thanks.

[@bjs001001]

I'm a little heavy handed as you said so I'm going to try the 4050.

[@Picassosgarage]

Awesome videos and great products. Now my question... can these paints be mixed by weight and if so, are the ratios the same?

[@CreatexColors]

Yes, Createx paints can be mixed by weight. As with mixing by volume, the weights needn't be overly exacting, and may vary per color. What's most important is achieving best atomization, which may require an adjustment of the reduction / mix amounts depending upon spray gun set-up, technique, etc. Thank you.

[@michaelrobinson9643]

THank you sir for the demo - The info I am getting in Australia is to use a 3:1 reduction of UVLS:Candy + 10% reducer for airbrush and spray gun. Is there a reason for that difference being proposed or advice you would offer around this? TH2 is 0.6mm? I'm using 0.5mm eclipse or 1mm mini spray gun. Greatly appreciate your videos too - very clear and well presented for a learning artist :)

[@CreatexColors]

Please follow the mix set-up and reduction guidelines set for in the candy2o tech data sheet, creatextech.com/pdf/tds/candy2o-TDS.pdf. We prefer 4050 6:1 candy2o. With a full-sized spray-gun, thinning with 4011 Reducer isn't required; for small spray-guns and airbrush, thin 5% -10% per volume with 4011 Reducer. With a TH2, maybe thin ! 5% per volume, however try first without thinning. Thank you.

[@mwebb-01]

Just got my candies the other day and day one I spilled my entire bottle of red and balancing.. :( LOL This product is Very nice. Thanks for the content. What surface type was painted on in this Demo? the 4050 was like a swimming pool with the spray gun.

[@CreatexColors]

Leneta spray-out opacity cards were used, thanks. www.leneta.com/

[@luigiangelobuonarroti4110]

when I spray candy I get a lot of pooling. Like imagine you spray water on a glass surface how the water will collect into separate water drops. Do I need to add more 4050 to thicken it maybe? I counter this right now by spraying very light coats with the gun a little closer to the model, but ideally I'd like to spray a bigger surface area. Also when I sprayed 4053 over it to give it a glossy finish I did two light coats and then one final heavier coat and man it completely ruined it like it did the whole pooling thing again. But when I did the light coats of 4053 it wasn't looking glossy so it seems like I needed the heavier coat. Any ideas on how I can remedy this?

[@CreatexColors]

Please follow the mix ratios set forth in the candy2o tech sheet (www.creatextech.com) try mixing 4050 8:1 candy2o and do not reduce. Apply in medium coats with a 75/25 overlapping pattern. There’re many videos on this channel showing the proper technique. Also as referenced in the candy2o tech sheet is that 4053 is not recommended as a top coat for candy2o. We recommend a 2k urethane clear for top-coating candy2o. Thank you.

[@paulosilva4420]

Great video!! Can I apply candy2o and clear coat it after? I don't have 4030 or 4050. I just have the paint. Thanks in advance

[@CreatexColors]

No, candy2o are dye concentrates which we only recommend using by mixing with 4050 UVLS Gloss Clear. candy2o are not intended to be sprayed direct form the bottle. Thank you.

[@DaveyGa]

In your video you mix 1:1 with 4050, however on the Auto Air site they state "Airbrush: Any tip-size, 18 - 27 psi Add 4050 10% - 300% per vol., then thin with 4011 Reducer 5% - 10% + per vol. Spray Gun: 1.2 - 1.3mm, 18 - 22 psi Mix 4050 6:1 candy2o Thinning with 4011 Reducer is often not required." 6 4050 to 1 2o is veru different to 1:1 ! Which mix to use???

[@CreatexColors]

Mix ratios are general guidelines. Airbrush: 4050 1:1 candy2o, thin with 4011 Reducer 5% - 10% per volume. Spray-gun: 4050 6:1 candy2o. Thinning with 4011 Reducer not required. For more, please refer to the candy2o tech sheet, storage.googleapis.com/createx-tech/pdf/tds/candy2o-TDS.pdf. Thank you.

[@ericduchene9065]

So useful for me Thanks for this. My retailer recommande to put after 4102 aluminium base and before Candy 4040 Bleed chaker for my die cast pickup, it is OK ?

[@CreatexColors]

We recommend 4011 Reducer for all Createx painting including candy2o, www.candy2o.com. 4040 Bleed checker is for application over candy2o before applying more colors. For more, please refer to the candy2o tech data sheet, creatextech.com/assets/pdf/tds/candy2o-TDS.pdf. Thank you.

[@jerrymeeuwse4957]

First and foremost, Thank you Chris for some of the best informative videos on the web. My question is regarding Kandy 2o and clear coats. "With my Iwata HP-CS I am trying to get that "deep,wet look" high gloss over Kandy 2o. I used 6013 silver sealer. Then 2 very light coats of 4004 transparent base. Then my kandy 2o. Now, all the local store had was 5604 gloss top coat. Should I order the 4050 ? Is it a higher gloss than 5604? Also, is my order of application sound correct? Sorry for long winded comments/questions. Thank you very much Jerry

[@CreatexColors]

Hello. We appreciate your kind words about our videos. The 2 light coats of 4004 Transparent Base seem unnecessary, and if applied light and dry, could be creating unwanted texture. 4050 UVLS Gloss Clear is Createx's best gloss level clear (dries semi-gloss, sand & polish for a high gloss finish). 5604 Gloss Top-Coat is best for textile and light hobby, best not used for a gloss finish over candy2o. For more application information, please see the guides and tech data sheets at www.creatextech.com, and email us at [e-mail]. Thank you.

[@j_cruz_56deuce26]

@@CreatexColors hello, I want to spray Candy2o Black 4664 on a clear plastic Gundam robot kit by Bandai I built so that it smokes lightly the clear plastic to desired effect while holding its clearness and still able to see details on inner frame . I noticed on this comment I wouldn’t be able to use the 4050 gloss clear cause I wouldn’t be able to sand and polish . Then I saw you can use 5604 as top coat but that it’s best not to be used as a gloss finish over candy20. I’m a bit confused now and want to know what I can do to get a gloss coat after.

[@redbaron2448]

Does the 4050 Leave Orange Peal since its thicker?

[@CreatexColors]

No, UVLS Clears, including 4050 + candy2o, are designed to self-level as they dry provided they're applied correctly; i.e. the spay gun is operated at the manufacturer's psi settings, the correct tip-size is used and application distance to substrate is within the spray gun's optimal fan pattern. Over-atomizing paint by applying at too high a psi or too much distance from the substrate creates texture in the finish. Thank you.

[@bradh4785]

I normally mix Candy2o with 4030, but have run out. Could you technically use automotive 1k or 2k clear as the carrier? That is, mix Candy2o concentrate into automotive clear and spray that mix? Thanks.

[@CreatexColors]

We recommend mixing candy20 with 4050 UVLS Gloss Clear for all hard-surface applications, sometimes 4030 Balancing Clear for substrates like canvass. No other medium is recommended as a carrier, especially not a solvent-based clear. Thank you.

[@tomfowler9577]

Chris, How thick is the 4030 and 4050 out of the bottle? I am having trouble getting it to spray out of a 0.5 tip airbrush. Does the 4030 16oz bottle have a mixing ball? How would I know if it froze in shipping?

[@CreatexColors]

4030 is ~ 300 mPas and 300 ~ 450 mPas. With thinning with 4011 Reducer, both will spray through a 0.5mm tip-sized airbrush. 4030 will require reduction ~ 10% per volume, and 4050 ~ 15% - 20% per volume. 4030 is much more airbrush friendly than UVLS Clears which work best with a spray-gun when used as a clear. Thank you.

[@badabooms8841]

once one, uses said paint, if there is paint left over, can that paint be saved for later use if so, what is the shelf life ?

[@CreatexColors]

For shelf life and proper storage, please refer to the technical data sheet for the particular color available at www.creatextech.com. In short, candy20 can be stored indefinitely after mixing with either 4030 or 4050 (provided its capped air tight unless pouring paint fro the bottle) but has a limited shelf life after thinning with 4011 Reducer. Thank you.

[@srte9357]

Whats the shelf life/pot life of a 1:1 candy2o and 4050 mix reduced 5-10% with 4012?

[@CreatexColors]

We do not recommend 4012 Reducer for use with candy2o as it promotes seeding/ coagulation of the dyes. Thin with 4011 Reducer only. Please refer to the candy2o tech data sheet available at www.candy2o.com for storage information. While we only recommend mixing and reducing candy2o intended for use within a 24-hour period, actual storage life can well exceed this when the paint is capped air-tight anytime other than actually pouring paint from the mixing cup, and kept away from direct light and stored ~ 50 - 80 deg. F. Thank you.

[@EdwardKing1422]

Great video man. Where do I purchase those smaller mixing cups?!

[@CreatexColors]

The cups are made by E-Z Mix, www.ezmix.com/

[@Imperatorelite999]

The 4030 bottle said 10 percent. What's happening, sir?

[@CreatexColors]

4030 Balancing Clear is added to Createx paints at 10% per volume, and in greater amounts with candy2o, where it is mixed 1:1 for airbrush use. For more about mixing candy2o colors with both 4050 and 4030, please refer to the candy2o tech sheet available at www.candy2o.com. Thank you.

[@jimmyzwheelz]

Loving the Auto-Air paints & your informative videos! What PSI are you running with the airbrush?

[@CreatexColors]

PSI setting for airbrush vary as per technique, concentration of candy mix, and whats best for a particular airbrush (tip-size, capacity, etc.). Best is to spray at a pressure that finely atomizes the paint without causing dry spray. For candy2o this is ~ 18 - 25+ psi. For more information, please refer to the candy2o tech data sheet available as a PDF on www.candy2o.com. Thank you.

[@electricdeckhead3083]

any info available on the small gun you were using, looks the goods. cheers

[@CreatexColors]

For information about spray-gun set-up for Createx paints, please see kzbin.info/www/bejne/qGbKeX5mnr-Eitk. Thank you.

[@ReactorFour]

I have quite a bit of Scenix SSR gloss Clear... is this the same thing as 4050? If this is essentially the same thing, I assume I would not use the crosslinker when using as a carrier for the candy? Thx.

[@CreatexColors]

UVLS Clears / 4050 Gloss is very much different compared with SSR Clears / SSR Gloss, both as a clear and in that SSR does not work as a carrier for candy2o nor direct to metal as are UVLS Clears. both UVLS Clears and SSR Clears (discontinued when SSR launched) are best tinned with 4011 Reducer. UVLS Clears are not activated with 4015/4016 Cross-Linker, SSR Clears also work best without the activation and a longer cure time. For more, please email us at [e-mail]. Thank you.

[@michaelrucobo]

Can the Candy products be used in leather and plastics? Wanting to try out on shoes

[@CreatexColors]

Yes, start with 4050 UVLS Gloss Clear applied as 2 medium adhesion coatings, then apply candy2o mixed 6:1 /8:1 of 4050:candy20, using none or a little as possible 4011 Reducer. Allow this to air dry 24 - 48 hrs , then apply any UVLS Clear. www.uvlsclears.com. Thank you

[@airbrushinmotion]

Can these be used as an automotive applications? I read on one website that they were not lightfast

[@CreatexColors]

Yes. No dye-based candy color or kolor is lightfast; a dye is going to fade faster as opposed to a pigment-based color such as a standard Wicked Color or Wicked Pearl & Metallic Color. Dyes will eventually fade (not as fast as a fluorescent color) but by painting to a fully sutured color with multiple coats and top-coated with a quality 2k urethane clear, candy2o, just like other kandy colors, are suitable for automotive refinishing. Createx candy2o have since they were first introduced over 6 years ago been used for complete vehicle paintjobs and have not faded. Thank you.

[@samuelfrodge4988]

What are the candy bottle sizes in video?

[@CreatexColors]

candy2o is available in 2oz. and 4oz. sizes, as well as larger 16oz. and 32ozx. sizes. Thank you.

[@johnbourg3388]

Plan on painting Candy2o on steel, what clear coat should I use for outdoors?

[@CreatexColors]

For automotive, a 2k solvent-based urethane clear works best. Createx 4050 UVLS Gloss Clear can also be used for sculpture, signs, etc., but a 2k urethane gloss clear will be best. Any brand is compatible. We often use PPG EC550, American Icon carried by Spray Gunner is another good clear option . Thank you.

[@carlstrippoli3261]

What do I need to do in order to airbrush that on metal

[@CreatexColors]

Often metal is primed with a catalyzed epoxy primer, followed by paint, whcih for candy colors is often a silver metallic. 6013 AutoBorne Silver Sealer is a metallic base for candy2o that can be applied direct to metal. Thank you. www.autoborne.com.

[@joethomas6320]

How durable is this paint? I'm interested in painting a racing motorcycle helmet and need something that with hold up to chipping from rocks and debris. I've never used water based paint. What can it be clear coated with? Can you use 2K urethane clearcoat?

[@CreatexColors]

cnayd2o mixed with 4050 UVLS Gloss Clear is a durable, dye-based colorant, perfectly suitable as part of a mid-coat over base-coat paintjob that is top-coated with a solvent-based, 2k urethane clear. candy2o and Createx paints, when used as set-forth in our Hard-Surface & Automotive application Guide, are a professional (durable & lightfast with excellent adhesion) paint. For more, please email us at [e-mail]. Thank you. 2021 Createx Automotive Application Guide: storage.googleapis.com/createx-tech/pdf/app-guides/2021-Createx-Hard-Surface-Automotive-App-Guide.pdf

[@stanleymanuel709]

chris, what color should you use to back the candy on polycarbonate lean RC bodies

[@CreatexColors]

6013 AutoBorne Silver Sealer is the standard, silver base for candy2o, www.autoborne.com. For a candy-apple finish, back with Wicked Metallic Gold, then with AutoBorne Sealer Black (or White, grey or yellow for a brighter value of gold.). Other metallic bases may also be used as a base for candy2o, such as W359 Charcoal, wickedairbrushcolors.com/pearl-and-metallic. Thank you.

[@5660foster]

For painting fishing reels and fishing baits would you still need to use the 4030 or 4050?

[@CreatexColors]

While 4030 Balancing Clear still works well, we're now spec'ing 4050 UVLS Gloss as the best clear to add to Wicked Colors for hard-surface painting, such as fishing reels and lures. Createx Airbrush & Wicked Colors have better adhesion and durability compared to not using either. Createx application guide: storage.googleapis.com/createx-tech/pdf/app-guides/2021-Createx-Hard-Surface-Automotive-App-Guide.pdf. Thank you.

[@willieyanez8139]

@@CreatexColors so you can mix 4050 with other colors, not just candy colors?

[@robmc5169]

What size air compressor where you using for the air brush?

[@CreatexColors]

Our air compressor and other features of our set-up are in our spray booth tour video, kzbin.info/www/bejne/hJbOgZl_ndxspLc. thank you.

[@GollesFpv]

hi im gonna paint a bike frame black paint wicked aluminum effect and then candy all with a spraygun 0.8/1,4 nozzle can i use 4030 instead of 4050 ?

[@CreatexColors]

We highly recommend 4050 over 4030, to the extent we'd rather see you not paint the bike frame with candy2o using 4030 as the carrier; since 4050 was introduced we've not used 4030 as a candy carrier. 4050 is that good. Please refer to the candy2o tech data sheet and 2021 Automotive & Hard-Surface Guide at www.creatextech.com. Thank you.

[@ivatay18]

ello .. What sealant do you recommend to make the paintings last longer in the lures?

[@CreatexColors]

The best top-coat clear for the most durable fishing lure is a catalyzed (2k) marine-grade, epoxy clear. Thank you.

[@Corless116]

I've been using 4012 reducer for spraying through an airbrush, should I be using the 4011? The Candy2o paints have been very challenging on lexan rc car bodies the way I've been mixing it, getting an even coat has been next to impossible. I figured I either have an old/bad batch of candy or I'm not mixing it right.

[@CreatexColors]

candy2o is best used when following our specs. 1) mix 4050 UVLS Gloss Clear 6:1 candy2o, thin (if required, often isn't) with 4011 Reducer, creatextech.com/pdf/tds/candy2o-TDS.pdf. Thank you.

[@mml3140]

Can you advise if theres a way to shoot these candies over Alclad chrome ?

[@CreatexColors]

Yes, best practice is to apply a coat of 4050 UVLS Gloss Clear (or AutoBorne 6000 Transparent Sealer) medium as an adhesion coating, then apply candy2o, followed by the top-coat clear. Thank you.

[@joshdavies80]

Is there any need to do an additional cost of clear if you're mixing the candy with the 4050

[@CreatexColors]

A gloss top-coat clear is required for a deep, brilliant candy finish. For more, please review the candy2o Tech Data Sheet available at www.creatextech.com. Thank you.

[@howardharaway2259]

I build scale car models, Pro/Street, muscle cars, and so forth. I saw these paints at Hobby Lobby and bought a few bottles not knowing how to use them.I picked up CandyO2 4655 Marine Blue. I am absolutely clueless about acrylics. I have been using more the most part, testors enamels and spray can lacquers. I would love to open my paint options wide open by starting with this Candy O2. I bought #4012 ( 296541)additive but not sure what to do with it ? Lol . I also bought Createx Pearlized Tangerine #5312 Wicked Pearl lime green #0305 and Wicked Detail yellow #0052. The name "Detail Yellow"......is there any special meaning, or usage for this particular paint . Anyone's input would be appreciated. OH....one more question. If and when I use the candy O2. I assume you need a Metallic base coat of some kind ? Again,thanks.

[@CreatexColors]

For product information, please review the technical data sheets and application guides available at www.creatextech.com. candy2o are concentrate, 100% transparent dyes, most often applied over a silver base such as 6013 AutoBorne Silver Sealer, www.autoborne.com. Additionally, there's many videos on our KZbin Channel showing a variety of techniques for using candy2o. Thank you.

[@howardharaway2259]

@@CreatexColors Cool,I will do that,thanks

[@patrickbrennan9799]

Where do u get this paint

[@CreatexColors]

SprayGunner, spraygunner.com/paints-for-airbrush/createx-colors/ Thank you.

[@vasili1207]

I have been commenting for months.... Where can I get this range in the U.K? I would like to try it .. but the radio silence is starting to annoy me...

[@CreatexColors]

For sales in the U.K., please contact SM Designs, www.smdesigns.co.uk/. No radio silence on our end, we soon replied to your inquiry for a U.K. dealer in the comment section to our How-To Thin Createx Airbrush Paints video. Thank you.

[@vasili1207]

Thanks for the reply..I will get in touch with sm designs... sorry didn't mean to sound annoyed, I didn't receive a notification on the reply only because I checked back I seen this one. Your paints look great quality and a have lot of different finishes I would like to try out. Thank you.

[@ChampreetzAirbrushchannel]

👍👍👍👍👍👍👍👍👍

[@paulbowkunowicz6960]

can I use 4004 transparent base with the Candy 2.0

[@paulbowkunowicz6960]

with an Eclipse

[@CreatexColors]

Yes, technically 4004 Transparent Base can be mixed with candy2o, however, to spray and use candy2o as intended, mix with 4050 UVLS Gloss Clear or 4030 Balancing Clear. Thank you.

[@paulbowkunowicz6960]

@@CreatexColors thank you

[@mohawksniper79]

👍😎👍

[@afranioreisleme6321]

Very good Mais por favor habilitem a legenda português Brasil ok.😂😂

[@deputy3690]

There are just way too many combinations and ratios to confuse users in my opinion. Createx seems like a great product but it should be simplified.

[@CreatexColors]

candy2o has a lot of versatility, hence a lot of mix possibilities. Createx Airbrush Colors is the paint line we recommend for newbie painters, createxairbrushcolors.com/. Thank you.

[@VictorOrtiz-hk8dn]

Can createx be clear coated with 2k spray can clear????

[@CreatexColors]

Yes, please refer to our automotive application guide for more, and always make a test panel before using a new paint & clear combination. Thank you. creatextech.com/assets/pdf/app-guides/2021-Createx-Hard-Surface-Automotive-App-Guide.pdf