Creating the Ultimate Triple Foam Car Wash

[@calebbrown9091]

Awesome that you walk through HOW you are putting stuff together

[@therevestor]

More to come. What should I work on next?

[@RichardsWorld]

I watched a few other channels, and yours is the only place that looks clean.

[@FireHawk92.]

That's a cool system.

[@calebbrown9091]

You're the man. Know your stuff. Subscribed

[@therevestor]

Thanks for the follow!

[@normalcarwash]

My OCD is so jealous of how you have your equipment room set up... I would gut mine and completely redo it if I had the time and money haha

[@therevestor]

Mines still a work in progress. I need to clean up my loft and figure out some shelving options. I try to do a little bit of cleanup/organization every time I am there.

[@normalcarwash]

@@therevestor It's definitely a marathon and not a sprint. And I have to keep telling myself to focus on the things the customer cares about and not just the stuff that drives me nuts.

[@dadudadudadurafoo5132]

Yo that looks cool! Most of the time if a car wash has this option it sucks making it worthless. To bad I'm in Houston I would love to go and use that carwash. Also I noticed around my area at least most self serve are gone. Now I have to use a touchless car wash. Smh

[@therevestor]

I agree. I have seen a lot of car washes with this function and it rarely is adjusted correctly. Most common problem I see is spitting.

[@emilychao12]

If I’m trying to extend my air and product lines. Am I able to safely disconnect the original, short lines or do I need to turn anything off?

[@joseph.shammami9525]

Hey. Revestor. I. Really. Love. The. Triple. Conditioner. Foam. And. Your. My. Friend ❤

[@therevestor]

Hey, thanks!

[@EluderRacing]

can you explain how you choose which orifice to use so you don't just blow thru a whole bucket of chemical in a single wash cycle.

[@rev9ers]

Hey, I’m also a car wash owner and wanted to know how you keep the triple foam from freezing in the winter? I’m about to add it to mine but wasn’t sure about the winter months. The foam brush has antifreeze soap and the gun has weep so not sure what to do with the foam gun.

[@justin_wayne_elrod_jrod]

Definitely very nice and whats your air liquid ratio for your triple foam

[@ruiz4774]

Is the mix ratio correct? What tip color do you use on hydrominders? Mine seems to be less colorful than that but sprays really well…

[@therevestor]

I was using yellow tips but the red specifically wasnt colorful enough. It seemed to be more of a white/pink foam so I moved up a couple sizes.

[@decline1129]

Where did you get the foam dampeners?

[@ItWhoSleeps]

can you give me some idea if possible to have a very basic triple foam or foam wax gun set up at home? THANKS!!!

[@byronmenjivar4697]

What is your background on? I am assuming plumbing, electrical? Besides realtor. I think I heard you say that in one of your videos.

[@JNHEscapes]

Love the detail on the wiring. What wire did you run to each bay? Is that like a 25 pair 18 gauge? I am looking at buying my first and your videos are very informative thank you. I also own rental properties and do renovation. I would love to make all this work seems that’s the fun part!

[@therevestor]

The wire I bought I believe is 15 conductor 18 gauge

[@StarWashSelfServe]

Where do you get the clips for keeping your hoses organized?

[@therevestor]

I just ordered a bunch of these. www.usplastic.com/catalog/item.aspx?itemid=45442&clickid=search-slider-recently-viewed

[@JNHEscapes]

Do they make that gun with a trigger or shut off? Looks like you could waste product. If the customer can spray their entire car faster than the allotted time for the triple foam then you would save product when they let go of the trigger and just let the time run out? If that makes sense.

[@therevestor]

No trigger the cost of the chemical is pennies so if the timer is running I am making a profit.

What size nozzles did you use on your guns? I have pretty much the same setup and I can't get mine to spray like that.

[@therevestor]

I ordered a whole bunch of sizes and I believe I settled on 4020. I would have to double check. More importantly is 3/8" line on the product delivery line.

[@TheSailingwoodworker]

Go ahead and get a Klein 3005CR ratcheting crimper. They sell them at Home Depot. Your old crimper will collect dust. I can't believe I used those terrible crimpers for 30 years before discovering the ratcheting type.

[@therevestor]

Cool I did not realize they make a ratchet style. Definitely picking up a pair for my electrical bag. Thanks

[@matthewhamilton1896]

Man you did an awesome job, I have triple foam at my wash. I have a similar set up but I'm not getting such a wide fan. Could you take a second and tell me which nozzle tip you installed on the gun? Thanks in advance.

[@therevestor]

The tip I am using in the video is a 5040. It needs a lot of volume to fill the fan so if I messed around with mine I would probably go a little more narrow.

[@matthewhamilton1896]

@@therevestor Thanks for the reply, I'll definitely be playing with mine. Yours looked to be perfect.

[@CARWASHCHANNEL.]

How the drying bay going

[@therevestor]

Its a tough project

[@jordankendall86]

Did you build the foam generator yourself? It looks custom made.

[@therevestor]

I did make those foam generators

[@jamesshepherd9997]

Appreciate the video! How many car washes do you have now?

[@therevestor]

Hi James. I just have this one car wash at the moment.

[@Rajo20024]

You need to come show some local car washes how to do this lol up keep

[@CameronAlleman]

💪🏼💪🏼

Where are you located

[@therevestor]

Utah

[@matthewroberts7255]

Hey brother. I just bought the same system. You Carr 2 help walk me through it. God bless ya man

[@realreactionn]

I’m trying to buy a car wash rent to own

[@therevestor]

Very cool!