DIY Leaf 🌿 Bracelet Ideas| How To Make Bracelet At Home| Creation&you

DIY Leaf 🌿 Bracelet Ideas| How To Make Bracelet At Home| Creation&you
#diycrafts #bracelet #howtomake

[@Bioluvskatz]

That’s one of the prettiest macrame bracelets I’ve ever seen!

[@PhosPhorosia]

just to tell : it's thin paracord made of nylon, don't use macrame cord, coz as it's cotton, it won't melt

[@DelphiaStrickland]

Not all macrame cord is cotton.

[@CreationAndYou]

True ☺️

[@kerravonsen2810]

In the case of non-melting cord, I would apply glue, let it dry, and then cut it close. Fabric glue would be preferable, because it will dry flexible.

[@AllieArango]

@@DelphiaStrickland i made mine with yarn and it melted

[@DelphiaStrickland]

@@AllieArango it was probably acrylic yarn.

[@idleartsyyukkuricrafts2591]

Timestamps for myself 0:28 1st row 3:30 end first leaf 3:57 1st row of 2nd leaf

[@heard3879]

How did you bring in longer threads? You should show the method for extending it.

[@Myrtana1]

Yes, I too was wondering how to connect longer threads unless this was just a sample and she used long threads for the bracelet. I hope she will see your question. Edit: I just found one of her answers. She used threads 45 inches long.

[@maryhammond7204]

And the sample were shorter threads.

[@lauristandley4359]

Yes, it said use 45” long threads. Very cool!

[@PSA3377]

This is so pretty . Glad i read the comment section abt nt using macrame cord but use paracord instead .

[@susanjeffay3851]

Clearest direction I've ever seen!!!!

[@vanuzafelicianodecarvalho1398]

Perfeito!! ❤

[@Rhanyra]

Love it! I am absolutely step 1 brand new to macrame. So far, I've purchased some 3mm cord. Now I have to figure out what to do. I will have to get some of the nylon cord that you used.

[@user-wv5bo1lj5i]

Здорово! Очень красиво! Спасибо вам большое!😊

[@nancyskinner5207]

She is wonderful! I love how you experiment to get the most realistic effects.

[@CreationAndYou]

Thank you ☺️

[@Miss.C.]

Friendship bracelets. We used to use DNC thread. I still have my threads. Fun pattern.

[@claudialippi5057]

Grazie!!! Molto chiara, pulita nel lavoro, grazie

[@altamont1873]

I'm new to macrame and your video is easy to follow because you teach well! Thank you!♥️♥️♥️

[@CreationAndYou]

You are so welcome! ☺️

[@camillajefferson386]

would love to see what the back looks like so i know how it will sit on the wrist! as i plan to use macrame to make a watchstrap and i'll wear it every day. for autistics, the sensory experience can be a dealbreaker, haha. also i wish we had more tutorials for how to finish natural fibres. i can't just melt the ends of most of my projects :')

[@giraffebp]

I'm new to macrame and would like to know how you add more thread since they are getting shorter and shorter!

[@fireflysparks1105]

I think they used shorter thread for the example but in the real thing they used much longer thread. I really don’t think they added extra thread on. Hope that helps

[@BliffleSplick]

The Russian Join would probably be ideal, but make sure to cut the threads to be worked in to different lengths so there isn't a whole bunch of them sticking out at one spot

[@giraffebp]

@@fireflysparks1105 Thank you!

[@giraffebp]

@@BliffleSplick Thank you!

[@CreationAndYou]

You are 💯% right 👍

[@cristinabraga3414]

❤lindo!

[@chinemapictures]

I think I might try to make a crown !

[@Epiphany_nz]

Just what I was looking for sometime ago

[@mayonnaisequeen1513]

Really should link a pattern to this

[@freedpeeb]

Beautiful. Thank you for the clear tutorial.

[@moonvibegems]

So pretty. Thank you! Tricky with which threads to use. Will be sooo hard for me to make. I will give it a go someday 👍💕

[@kasiara88pl]

So soo pretty ❤

[@rin_okami]

If you used different colored cords you might be able to get a cool variegated leaf look, like a polka-dot plant

[@Craftsman1988]

Simple method but you have created a masterpiece

[@CreationAndYou]

That is so sweet of you, Thank you ☺️

[@cosyla1928]

Wonderful! 🌱 👍🌿

[@CreationAndYou]

So nice of you

[@pattyy78]

Thnx for share your knowledge with us with us

[@RachelBirdy]

Beautiful work and such a great video! I'm so inspired to try this!

[@pelinyildirim1900]

SO how long should the rope be to make this whole bracelet? First given length was only enough to make like 2 leafs?

[@syrefayne8922]

The example in the video was a shortened thread, but the given length should be enough for the whole bracelet (they said in another comment)

[@nightfall3605]

8 lengths of 45 inches

[@elsanatlarivehobi]

çok güzel olmuş💖💖

[@AllieArango]

💕this is so cute!💕🐱

[@BreathCreations]

Just made one thanks so much.. may I ask whats the name of that burning thingy for the ends? Where can i get one of those?

[@kubraca...]

Turkish melody? The brecelet was very beautiful

[@CreationAndYou]

Thank you so much ☺️

[@litalrubin1936]

kzbin.info/www/bejne/mpy2m2uKgLSjd7Msi=Xr5caOqZaUKAn5Q5

[@litalrubin1936]

kzbin.info/www/bejne/mpy2m2uKgLSjd7Msi=Xr5caOqZaUKAn5Q5 I know the melody as a very very old Jewish song. See above.

[@nargis.weaves]

❤wow❤

[@juleb.7136]

This is beautiful!!! How long is the finished bracelet?

[@helenalibertella4795]

Hermosa gracias muy linda y que usas macrame de algodón 🎉🎉🎉 desde argentina ojalá me ayudas gracias

[@denisestover2416]

@helenalibertella4795 No, no Helena. No uses cordón de macramé de algodón. Debes usar una cuerda de nylon para paranoid. ¡Dios te bendiga! 😃

[@Kathy-ku9tm]

Thanks lovelyleafb baceloys❤ new stich

[@chinemapictures]

Awesome!

[@natalyazakharova3464]

It’s so pretty❤ thanks for sharing

[@silviagraciela9600]

Magnifique merci

[@mariarosagomez4385]

Bellisimo 🍃🌿🍃🌿🌿🍃

[@ginalogi5110]

Lovely. And I like the music.

[@CreationAndYou]

Thank you ☺️

[@user-sh5jt3fd2x]

Beatiful thanks ❤

[@CreationAndYou]

You're welcome 😊

[@ginar.5087]

Beautiful ❤

[@CreationAndYou]

Thank you! 😊

[@trinitywave]

interesting. thank you. love and light.

[@CreationAndYou]

Glad you enjoyed it

[@poojasherwal6647]

😮😮😮😮wow soooo beautiful ❤❤❤

[@CreationAndYou]

Thank you so much 😊

[@kellypreviti6963]

What is the melting tool you used. Bracelet is so sweet!

[@olderendirt]

This is beautiful. I might try a larger diameter and length of cord to practice before using the small version. Thanks for sharing this.

[@CreationAndYou]

Thanks for liking ☺️

[@mema4577]

かわいい！

[@eilenepatrick9319]

Very clear and easy to follow. Excellent Job.

[@CreationAndYou]

Thank you!

[@rumista8654]

That is so pretty. Is there a way to connect different colored threads? I kinda wanna make a rainbow version

[@Miss.C.]

We used to use DNC thread or embroidery thread and called them friendship bracelets. I use a safety pin and a pillow while tying the knots in front of the tv. There are basic bracelets that might be good to try first to get the hang of it.

[@Miss.C.]

You can buy any color cord or thread

[@gitag919]

Thank you for beautiful art work you are creating. I like to know how long tread we use for 1" work and what is the tread number you used? ❤

[@si_pengrajin]

Very Nice! ❤❤❤

[@eb-pi1pv]

how does it attach, though?

[@azraazra5879]

abone oldum şimdi kanalınıza emeğinize sağlık

[@gattogateaux7852]

Does this pattern work with embroidery thread?

[@HeathsHarleyQuinn]

I used embroidery thread and it worked really well!

[@CreationAndYou]

Yes, Just make sure it's tight enough ☺️

[@rajithadaggupati4324]

Superb ❤

[@CreationAndYou]

Thanks 🤗

[@sarahs7253]

Can you do this with hemp?

[@anisfatima1559]

SUPERB 👏👏👏👏👏👌

[@CreationAndYou]

Thanks 🤗

[@angelahorga9948]

I don't understand how to start for the second leaf. Should I keep the same threads from left to left and from right to the right? How does the back look like?

[@dezgrillz1833]

I've been struggling with this too. After CAREFUL scrutiny, I do think that the two sets of 3 threads left in the back after you connect the two sides, cross over to opposite sides in the back. That's the only way I've been able to recreate how it looks in the video. If I'm wrong, hopefully the OP will correct me!

[@angelahorga9948]

@@dezgrillz1833 I did keep the 4 ones from the left on the left and the same on the right side and it looks good.

[@joycefung2473]

I keep getting a gap between the two halves of my leaves down the centre line. what am I doing wrong?

[@meshamybelle]

Excellent! Thank you! What is the tool used to melt the treads called please? I’d love to have one.

[@zabib1137]

It looks like an electric lighter

[@winonahampton5951]

Yes what brand of lighter is this please? Thx

[@user-xv7hk6pl4f]

The heater used to melt these yarn ends without fire is very nice! What is this product called? What should I search for to find a place that sells it? A lighter? Or a special product for handicrafts? I have never seen it in Japan.

[@masterdz1518]

I think that lighter have same concept with vape pod

[@user-xv7hk6pl4f]

@@masterdz1518 "Vape pod" is an alternative to cigarettes, right? I'm not a smoker and have never used e-cigarettes, so I didn't know. I will look for it. Thanks!

[@sharonliu598]

I think 45 cm is not for the whole length of this bracelet??? Wonder how long will it be

[@CreationAndYou]

It's 45 inches not cm

[@kombidoris]

Seria em média 114,3cm -Ou seja... 1,20cm cada com sobra. (((It would be on average 114.3cm - In other words... 1.20cm each with a surplus.)))

[@jerrolpongpong9911]

If i use embroidery thread would the bracelet still turn out fine??

[@CreationAndYou]

Yes, But Make sure it's tight ☺️

[@emeltarik2151]

👏👏👏👏👏👏🧿👍

[@rachelstrahan2486]

👍

[@irisperez5303]

No me gustó porque no enseñaste todo el proceso. Tenía el hilo corto y como hiciste para hacer el resto de la pulsera.

[@suwarnamalabuty6612]

I liked ur video old u please let me know how u extend the thread

[@adrixmorales3287]

Por que no enseñas como añades hilo, con las primeras medidas solo alcanza para dos hojas, por favor muestralo, gracias!

[@cristianandrespenatearaujo]

fue solo para mostrar

[@cullenist1234]

so as far as the length goes... do I need the thread a little longer? I wanted to make these for people.

[@tianamarie989]

8 strands at 45 inches each.

[@livyintheskywithdragons]

😮😮👏👏👏👏

[@CreationAndYou]

Thank you ☺️

[@silverlining_1995]

What type of string and where can you get it?

[@knelson92]

What size cord do you recommend?

[@CreationAndYou]

1 mm ☺️

[@Jchivix]

Medida.del liston!?

[@marianne2905]

What is the name of the thing you you burn the ends with?

[@CreationAndYou]

It's a chargeable lighter ☺️

[@marybehn3139]

@@CreationAndYouit doesn’t look like a lighter that has a flame. Like in the USA…I’d be interested in one like yours.

[@SparshajaDey]

Can I use embroidery floss?

[@CreationAndYou]

Yes, 😊 But make sure the knots are tight and secure.

[@joann5157]

Do you sell these anywhere?

[@anneatkinson3388]

Hi. Lovely bracelet. Approximately how long was each piece of thread please?

[@anneatkinson3388]

Sorry. Just seen the details right at the beginning! ❤

[@Kerosin12]

Красиво А всем хватило нитки 114 см?

[@cristianandrespenatearaujo]

Tambien estoy dudando de ello.

[@cristianandrespenatearaujo]

Seria em média 114,3cm -Ou seja... 1,20cm cada com sobra. (((It would be on average 114.3cm - In other words... 1.20cm each with a surplus.))) @kombidoris hace 2 meses

[@irmamoreno9591]

What kind of thread are you using? And how do you measure the size of the thread? Thank you!

[@CreationAndYou]

Nylon Thread, Size 1 mm ☺️

[@gitag919]

How do you measure the size of the tread?​@@CreationAndYou

[@lorenavelvet]

​@@gitag919if you watch the video the answers to your questions are at the beginning.

[@eshegel1433]

What kind of lighter is that?

[@silviadeavila9296]

Electrónico

[@cosyla1928]

Lichtbogenfeuerzeug

[@cosyla1928]

arc lighter

[@karenholst8306]

👍👍👍💕💕💕🇩🇰

[@dodoshafeek6924]

نوع الخيط ايه

[@auggiedoggiesmommy1734]

What was that that burned the ends?

[@nightfall3605]

An electric cigarette lighter

[@shen_jeon.3575]

Alguien me puede dar las medidas en cm?😿

[@marybehn3139]

At the time 5:25…what is that tool called

[@littlewillowlinda]

I think it’s a lighter to singe and seal the bottom

[@katjafarbenfroh8646]

very beautiful and very well presented except for how to add new threads.....?

[@sq5]

Maybe start with much longer threads?

[@giraffebp]

I was wondering the same thing!!

[@user-is4er7bt2i]

Верёвочки подлинее и юудет калье😏

[@ChejieShy]

What is that thing he/she use to melt the tips of the bracelet?

[@BreathCreations]

Just asked the same question 😅

[@isabelcoppa210]

Pretty sure it’s a cigarette lighter.

[@katherineperry9876]

Thank you for sharing; they are beautiful! John 3:16 KJV

[@silviagonzalez7573]

No entendí el largo por favor si los dieras en centímetros te lo agradecería 🙏🙏🙏🙏🙏🙏

[@Rarafb2761]

Can I use cotton?

[@griffinsmithish]

You can, but you won't be able to melt the threads for finishing the cut ends. You might need to use some kind of glue to keep the ends from fraying.

[@Rarafb2761]

@@griffinsmithish Ahaa. Perfect thank you

[@kristenfay5083]

What is that burning tool called. I've never seen it before

[@CreationAndYou]

it's a chargeable lighter ☺️

[@dilamani]

Very nice bracelet. But the quantities of thread mentioned in this video is not enough for the whole thing. You can do only about 3" with this quantity. Its better if you can give the correct information when you post tutorials like this. Thanks for your understanding.😊😊

[@CreationAndYou]

The measurement provided in the video is enough for the whole bracelet. But the bracelet Which I made in the video is just for demo ☺️

[@mariateresaramirez1986]

wdym 45 inches?? thats a lot

[@cristianandrespenatearaujo]

Seria em média 114,3cm -Ou seja... 1,20cm cada com sobra. (((It would be on average 114.3cm - In other words... 1.20cm each with a surplus.))) @kombidoris hace 2 meses

[@GiuliaArcuni]

Non capisco niente😅

[@Gi_petra]

May you put descriptions of what kind of cord you use

[@CreationAndYou]

It's Nylon Thread, 1 mm ☺️

[@scruffypupper]

Does someone get bored and sit fiddling with a piece of string to pass the time and come up with this stuff? Interesting!

[@CreationAndYou]

☺️

[@thomaswilliams7888]

Very nice BUT, how do you connect more string ???

[@nightfall3605]

Start with 8 lengths of 45inches