Spot Welding Machine Using Lead Acid Battery

[@Futureboysingh]

ये तो वाट लग गई सभी वेल्डिंग मशीन की, वाह भाई वाह

[@hpblack1953]

I especially like the part where drilling toward the hand is encouraged.

[@la2123]

Perhaps you will love the "drilling monkey eyes torture video".

[@diymaster101]

Just because he did it doesn’t mean he encouraged or condones it I do it all the time but I don’t say do it there’s a difference between doing something and encouraging someone to do it

[@fromthebackofmymind]

All Sihks, secure beards please.

[@roberham6659]

Chinese saying 「藝高人胆大」「techniques high human heart big」meaning when one's has good technique then he/she will bold to do anything.

[@ideegeniali]

I preferred the part when he was snapping sharp cutter blade with potential cracked piece flying towards the eyes.

[@pantelistsarnas409]

Yes very good method if your father have a factory of car's batteries. After 2-3 weldings you replace the baterry with a new one for the next 2-3 weldings :P

[@litofrancisco5374]

After a few minutes your battery is going to discharge because only 1 diode you put in your battery..

[@maianbaaii]

😂😂

[@souravbhattacharyya3392]

Why...battery can be charged through solar panel

[@keedzulkiflykeeabdjalil3536]

Even without diodes it works but it will damage the battery, so that's why he use diode to prevent from damaging the battery

[@p0tr3bit3l]

@@keedzulkiflykeeabdjalil3536 what's the name of the diode place, can be improved more for battery not getting damaged?

[@ashrusso2862]

Don’t know much about welding but neither does this guy 😂 P.S. The Stanley knife blades was different angle when shown closely.

[@Jesus-H-Christ]

If you make one of the probes to have a greater surface area then only 1 spot will get hot instead of both contact spots.

[@jimmyjohn8008]

Thinking the same thing to use a half of a car jumper cable.

[@samuelbailey1888]

Copper electrodes may be better, as they don't stick to steel.

[@waynemasters8673]

Carbon rods from batteries.

[@jakemeyer8188]

I know as soon as I hear royalty free techno and no narration, I'm 'bout to see some sh!t go down.

[@DaVeHiLl200]

🤣 does this music piss you off to the point you're sat the watching in silence, stuing thinking "I would prefer no music at all, I didn't click on the link to be force fed the most shit repetitive noise ever". If I had a penny for everytime I heard these shit songs I would be loaded

[@ltsgobrando]

@@DaVeHiLl200 guess it takes all sorts to make this world go round! Well I'm not a huge fan of this particular song the style is for sure in my top 5. Just to share some vibes ill share a few in no particular order. Already covered the happy techno beats, the list would also have chillstep(Kygo and Vexento), extremely bass techno (good example are Breathe by Zabo and Rebels by Black Tiger Sex Machine), *HEAVY* metal (Gojira. 'Nuff said), and what I can only describe as emotional music like Her Last Words by Courtney Parker. I'm a bigger (gym not fat) 26 year old bald dude, lotta tats and scars- basically trying to say I'm no puss but that song man... it hurts. Haven't cried at a funeral yet, still do every time I hear Her Last Words lol

[@MatteoAngeloGranali98762]

Yeah a spot, ON THE SPOT destroyer of good battery source.

[@josealfredfernandes]

Sacrifices must be made for greater good

[@AiantasD]

@@josealfredfernandes LOL..

[@captainjack8833]

Connecting 2 terminals of batteries with a diode.. Safety level is directly leading to the heaven

[@lyndonp6296]

The diode would have turned into a piece of wire on the first try. Not needed on a DC battery anyway.

[@binaryglitch64]

@@lyndonp6296 That's a 6A4 diod... it's common diod that comes in at 6 amps at 400 volts... that's a 2,400 watt diode. It will survive that little 6v battery ... it's there for back flow protection to keep the battery from heating up... it's still a super unsafe build, but the diod definitely didn't fuze... in fact diodes can't fuze into a conductor because of how there constructed... it would glow red hot, let out it's 'magic smoke' and loose it's conductive properties then the glow would go out and it would just be a dead diod. If your lucky it happens fast enough that the thermal expansion causes a miniature explosion, but usually it's not that spectacular when a diode fails though... usually it's just glow, smoke, fizzle, dead all in the course of about a second (a really long time in electronics).

[@lyndonp6296]

@@binaryglitch64 Yet, in my 40 year career as an electronics and computer engineer. I have replaced literally hundreds of short circuited power supply diodes and rectifiers that have turned into Zero ohm conductors.

[@binaryglitch64]

@@lyndonp6296 okay, well if you understand enough to say zero ohm conductor than you can totally call it a wire all day in front of me and go unchecked because you know what your saying. Also because respect for elders. You started your career when I started life.

[@joyjoy534]

@@lyndonp6296 I am at a lost how a pn junction becomes a wire.

[@Engineerboy100]

How did you select 6 Amps for your diode?

[@joseeoliviero6078]

Good point. I also did not catch the battery voltage?

[@funfunideas]

와 끝내주네요 !!!

[@adamnowak8876]

Mate. Not even close to a spot welder. The thing is not even welding and the electrodes should be copper…

[@clark2711]

Good product but what you need is some sort of fast switching mechanism.. Otherwise the current is too high to utilise and it will damage the part to be spot welded. Shorting the battery for a long time may even damage it. You can use a 200 amp relay as a switch.

[@sureshendla]

Instead of cutting the nail head you can solder it and it also helps in strengthen of the wire joiner.

[@thosoz3431]

That right, just short circuit the battery time and again. Now why do I think that could lead to disaster ?

[@MR-ub6sq]

It's not a short circuit because he has a diode as a resistor on the plus terminal of the battery. It's a LOAD so it's wrong for you to talk about a short circuit.

[@thingmaker3]

Thank you, this was freaking HILARIOUS! 🤣😂🤣😂

[@libertarian1536]

Not the best way to weld, but its how I taught my self as young teen in my fathers workshop in a similar fashion. great memories. Thanks

[@yangkalong9189]

ชข

[@dogdooish]

Great for a cheap spot welder, but I suggest you do NOT use it on your battery packs! A fraction of a second too long and you are going to damage the cell! :(

[@NavinduEL]

I think add capacitors may help to reduce damage to battery

[@VHKriss]

Didn't he use a diode

[@PkGeorgian]

A diode is used, if still doubtful then use a dry cell carbon electrode on one end.

[@DaisyKarensunflower]

So what trash anyway or scrap

[@DavidCNagy]

Should have one contact on base metal and other on the piece to be attached. Putting both on the same top strip makes a short circuit and does not create a spot weld between the 2 pieces of metal..

[@Engineerboy100]

That looks kind of dangerous ... looks like it's very easy to short that battery and cause it to explode :(

[@Hady_Teknik-mandiri]

Saya lihat. Pertama kabel merah di sambil ke accu plus. Menggunakan dioda. Pas pemakaian. kabel merah tidak ada dioda.

[@mjsaedy6637]

This video should be titled "how NOT to make a welding device" Very dangerous!

[@wisdomatixali4341]

hahahaaa that's being honestly mean

[@agusabok4965]

bahaya buat orang yang tidak bisa seperti kamu.🤣

[@samsman007]

Indian technology.. 😂😂

[@paneerpolice3454]

@Flip Miller no safety measures only pleasures....until that backfires.... aka Indian Jugaad

[@shindvs]

@@paneerpolice3454 💯 percentage truth you said

[@emantsal7115]

You have to give it to them , they can make a soldering iron using a soldering iron (with the dirtiest tip) and a glue gun and a coke can and a little Indian magic lol 😆 😉 😀

[@rilosvideos877]

The fixture of the nail at 2:00 is great art work! Thats whats the electrician wants to see! A connection capable of really high current - just as you need it for spot welding! But wait - its going to be even better: the diode - poor thing! Why the hell would you need a diode here??? Its probably melted to short circuit now - thats why it still works :-)

[@tjones99]

100% agree the diode isn't needed... which I guess is why it isn't in the circuit in the video when they are welding. This is not a good spot welder.

[@youknowvin]

Obviously this is a diode test circuit. It works a lot like a fuse test circuit. One and done.

[@jerryrupe7391]

It seem to be good enough for certain jobs, especially if a guy already has all the components laying around like this guy typing this comment. I have a specific task is why I'm watching a few videos, the easier and more inexpensive way I can achieve my objective is what I'm looking for. I have a $10 u.s item that I would like to repair so it don't make sense to spend $30 on the circuit board and whatever else to achieve the same results in my case. I'd be happy to return to comments when finished and give a honest review of my success or failure. If anyone would be interested in honest opinion of how this performs on everyday materials? I'm not a welder or an electrician and have very very limited knowledge how electrical currents flow. The easier it is to comprehend and implement the better for a lot of people who don't have the knowledge of electrical currents and how they work and what components you need to build more sophisticated devices. Im just a regular Joe that turns to smarter people then myself i. e KZbin for ideas to aide me along. To criticize an idea just because you have a more elaborate sophisticated way to achieve near same results. Well post your KZbin video and maybe the way you suggested would be better. But is it more practical for everyone or only a one time use? Keep on keeping on fellas all these diy vids are great. And I'm sure they help tons of people..

[@annespacedroid]

Hey, that's some high performance sh!t right there....!

[@TadpoleTrainer]

The guy just makes videos that teach you enough to get hurt but not enough to avoid it. Which is probably all he knows too. Shouldn’t be posting stupid ideas like this. Someone who doesn’t know anything about electricity and what is safe will try it because it looks so easy and simple. Dying is easy and simple to do too.

[@navaneethanravichandran9161]

Can make any control circuit. Just a small pulse to ensure avoid burning of the strip.

[@Dailymailnewz]

Yes, it needs a simple regulator other than that it is good stuff.

[@shindvs]

It need him electronic basic and back ground

[@rajishanmugam8926]

அறுமயான பயனுள்ளதாக பதிவு இருந்தது நன்றி சகோ

[@TruePatriot59]

Why is the diode you soldered on the + side not on any longer when you were spot welding???

[@AiantasD]

Well, apparently came out for a walk and will be back later...

[@c4rbur4tor33]

he went out for milk

[@DiffEQ]

It was unnecessary and foolish. It fried the first time he tried using it.

[@Babihrse]

He didn't think it would go pop. Probably made sense to add a diode he just went the wrong way about it. So probably added it just didn't know exactly how to add it.

[@p.p.wijesekera7388]

What is the purpose of the Diode used in series. The battery is giving DC and no further rectification necessary.

[@sharikashetty1517]

It is necessary because we are going to use it on liion batteries

[@p.p.wijesekera7388]

@@sharikashetty1517 Thanks Sharika for your comment. However see the title of the video It is "Spot welding machine using lead acid battery". My argument is valid irrespective of the battery type. I think adding a series diode has no meaning.

[@sham1234567891]

@@p.p.wijesekera7388 It is extremely important. It has nothing to do with rectification. It is a BLOCKING DIODE to avoid feedback from target batteries to spotwelder battery. Basic rule for security.

[@georgestiell7740]

The diode ensures the current only flows in one direction. It’s for safety purposes.

[@johncrosley1]

@@georgestiell7740 . The only reason for a diode in a dc circuit of this type would be to protect from any back emf generated by an inductor such as a relay coil but short circuiting a battery is definitely not recommended. That is a universal instruction that accompanies all batteries. An 18650 spot welder works on low voltage and high current usually by the discharge of a large value capacitor to give a short duration high current pulse.

[@Quickened1]

In an emergency situation, this would absolutely work on light gauge materials, but it is not advisable to use this setup for long term use...

[@h8GW]

Sketchy af. Just get a $20 controlled welding pens.

[@Quickened1]

@@h8GW I'm not gonna carry around a welder everywhere I go, so in an emergency, if all the parts were on hand, this could get you out of a tight spot...

[@Fikry-Elfassakh]

Bravo . 10,000 Likes .

[@LheodaDjTechTv]

watching and sending support nice sharing again.

[@ramuji6041]

Can use 12V 5A transformer for this spot welding in absence of battery.

[@ideegeniali]

no, 5A is not enough. You can use supercaps instead of battery in addition to your 12V 5A supply

[@troye.1309]

Why on earth would you need to put the nail in a drill to cut the head of it off🤔 Not to mention you're going to ruin a perfectly good battery.

[@advl__]

Appreciate the efforts but there are some disastrous design flaws which you can work upon. Sorry for being a critic, but this can get dangerous to viewers who may try to copy you. 1. The SS nail literally melted. What are some better alternatives? 2. Should've used proper battery connectors instead of directly soldering on the battery terminals. The battery material (chemicals) get damaged due to heat, thus reducing battery life. 3. Diode alone is not sufficient for protection, how about adding a fuse of appropriate value? 4. How about PWM switching control (using maybe MOSFETS) for variable output power control and efficiency. Also when it gets touched it should automatically disconnect after few milliseconds for a precise spot weld, after that even if it stays touched, it won't be connected. 5. An assembly setup with a handle like how vertical drills work. If the two terminal probes touch each other by mistake, then it will blow. 6. How about Using an 1:1 isolation transformer between battery and system?

[@spinnanz]

The diode has been removed by in the video of it working. I'm guessing the current killed it.

[@merrickbrody8859]

I, for one, appreciate this comment. I am an avid DIYer, and your suggestions are very valuable for someone like myself who is serious about recreating a similar device for small projects. 👍🏽

[@chloedevlin6544]

What is a PWM switching control if I may ask? And what might it look like? I mean down to the component level. I've been trying to learn about circuitry basics and the fundamentals...any input helps. No obligation though. 💁‍♀️💖

[@chloedevlin6544]

@Merrick Brody what kind of stuff do you make DIY? Any chance I could see some of your work?

[@advl__]

@@chloedevlin6544 basically, you would use a switch which can be controlled (turned on or off ) digitally/ with a digital signal like a 1/high or 0/zero, generated from a digital circuit. This switch can be a MOSFET, Relay or other any other electronic switching device suitable for this application. (Suitability depends on factors like maximum current rating, polarity, switching speed, triggering circuit specs, etc.) For starters, now you can turn things on and off with precise timing with use of this switching devices... For eg. you turn it on for precisely 100milliseconds and then turn it off automatically by using a digital circuit.

[@manojpatel9917]

👍🏻👍🏻👍🏻👍🏻 desi indian jugad 👍🏻

[@sharukhmatekuki5830]

Nice 👍🏻👍🏻 🇮🇳 || Kuki.

[@mikebenstead7600]

"Positive electrons", eh? Just out of interest, what's the diode for? Is that in case you are spot welding batteries to maintain polarity or is it acting as a resistor?

[@fayezmohammad745]

Great idea I've tried it before and didn't work because I didn't use diode to stop the current going through the battery. Thank you for your effort man you solved the problem 👍

[@usefulideasforall4747]

Diode value please

[@fayezmohammad745]

@@usefulideasforall4747 Get one from a broken microwave

[@DiffEQ]

Diode serves no purpose but to make smoke and shrapnel.

[@souravbhattacharyya3392]

Very nice,but won't the solder melt inside the probe covers?

[@matthewjenkins1161]

No because that isn't the point of highest resistance.

[@Quickened1]

@@jeffcantley9203 that's because the resistor is the point of highest resistance! Just like the probes touching the metal is the point of highest resistence, therefore the wires don't melt first...

[@DiffEQ]

@@Quickened1 Just like the path of least resistance is not the only path for current, the highest resistance is not the only resistance. Considering the large currents in this ridiculous "spot welder", Sourav has made a correct observation. In every case, the connections should be mechanically sound before soldering. Solder is not intended to be the current carrier as it's typically 5 to 10 times the resistance of copper, depending on the alloy used, with a much lower melting point than iron, which is about 4 times the resistance of copper. The diode that was soldered in place was absurd. Not just because it was soldered in place, but because there is no way that diode is going to handle the current... and since it's missing at the end, it definitely didn't survive. Never mind that is served no purpose. THIS is why people who make videos on KZbin are often dangerous. You can be king of the blind with partial sight in one eye and blind in the other.

[@Quickened1]

@@DiffEQ I agree that this device is a joke, and it should only be used in an emergency, life or death situation. I was just stating the reason the solder would likely not melt, and if it did, so would all the insulation and just about everything else. You're right, a lot of dangerous people posting on KZbin...

[@pandemicrespond8429]

After a few second... You will hear one-word "KaBoooM...!!!!"

[@binaryglitch64]

No he won't, it will just melt... at worse we're looking at fire with battery acid and molten plastic spilling out across the table ... in a really really rare type of diode failure he may get a small pop from the diode... but that's a 6a4 diode ... it's rated for 6 amps at 400 volts DC so that's 2,400 watts... the dioed would out last that battery... but he configured it wrong for backwards voltage protection so the battery is likely to melt... though he'll probably notice before fire starts... it's going to start warming the plastic by the terminals first and as the plastic gets soft things will begin to shift and he'll see that his terminal is say 8 mm from where it belongs and then realize he's melting the battery. That's the most likely outcome ... but kaboom has my vote... that would be way cooler.

[@JoseA-Divergent]

Great Idea! Diode put .....I do the same but instead of steel I put pure carbon

[@raymondbrady8742]

I haven't watched all your videos, but looking back over them for the last few years: I can sort of understand why I subscribed to your channel in the first place. Most of your videos are basically harmless, with the occasional bit of fun added to get the old Mellon functioning somewhat outside its usual box of thoughts. I probably wouldn't even worry too much if my boy started flicking through my KZbin library to see what his old man's been up too... But, now: those days seem long gone. I've seen for real the damage caused to the human body by arking battery terminalls. Just the thought that someone NOT in the know might try something not too dissimilar To this.... food for thought, people. Food for thought....

[@fromthebackofmymind]

Hey Ray! 40 years ago, one hot day in the shop... A customers car that just got into a stall for a non starting issue. Yup, the battery exploded but the hood(Bonnet)for you Brits was closed. I have an inate fear of dead shorts in high current potential. KZbin has tons of Darwin Award winning content.

[@frantos2757]

What is that item you welded on positive pole?????? Why it isnt in your components list?

[@sdhillon4500]

That was Diode just to make current flow in one direction .

[@williamwong5627]

Why the diode is needed? The battery is DC not AC. You are going to burn the diode if the current exceeded its ratings.

[@kaicitytsai3675]

Copper's electrical conductivity is unparalleled.

[@shaziainaam]

What component you've used? Mentioned 6Au on it.

[@kushking5354]

He deffo superglued those razor blade pieces together 🤣 you can see them move after hes finished heating them up

[@achomkonyakanok5933]

This will decrease your battery life and get spoil quicker

[@randyconcepcionvlog3764]

In the last part of the video the diode you install in the possitive terminal on the battery is missing...why?

[@joecoolatienza7090]

i also noticed missing diode..😀😀😀

[@ioanpop8578]

Because this diode of 10A became shorted or..exploded ! :-)

[@DiffEQ]

It's unnecessary. Serves no purpose but to make smoke and shrapnel.

[@Grushnerd]

If you make a pedal that will create a quick contact you will have some more control and not stick your electrodes and melt everything. Just tap the pedal quickly.

[@freeenergy6443]

Lityum batarya yapıyorum. Güzel fikirler ilgimi çeker. TÜRKİYE

[@minkorrh]

For a $13 spot weld kit, I'll pass on this. And people wonder why in Canada we make immigrants essentially re-educate themselves to prove proficiency in their field. This is why.

[@binaryglitch64]

Something tells me he's not an electronics engineer ... if he moved to Canada he'd still have a job as a telemarketer, still be doing KZbin videos, and still making dangerous stuff in his house... nothing would change and vocational training would just improve his telemarketing and English/French skills... it wouldn't teach him how not to burn down his house. So I get what your saying, but your point is moot. Still the sentiment is worth expressing.

[@stevesteve-wn5md]

"the positive electrons and negative electrons combine, the heat energy is produced" AND THE BATTERY EXPLODES!!!!

[@bryanrocker5033]

Two problems with your set up. First and foremost those leads are always hot. That is a bad thing. Second stainless steel is the wrong material for the leads as you showed. Melting them. Copper or tungsten would be a better choice. A momentary switch is essential for safety.

[@dominikhejl5748]

rather than spending a few bucks on batery and other pieces, i spent the money on far more practical and safe spot welder that can act as a powerbank as well =D

[@jerryrupe7391]

What is the little black link you added? Is it a diode? And do you recommend a specific one?

[@DiffEQ]

Yes, it's a diode. What else could it be? It's not going to survive shorting and, if you look, it's not in the device he's demonstrating. It fried the first time he tried it... and it served no purpose.

[@jerryrupe7391]

@@DiffEQ well thanks for your comment. And to hell if I know what it was is why I asked the question. I'm not a engineer nor electrician. Electrical engineers, for all we know that could be anything or nothing. "What else could it be" some people think they're to smart for their britches sometimes. Maybe it's low self-esteem because they know something someone else doesn't they feel they have to be insulting to boost their ego? Are you sure that isn't just blade fuse in the housing for a fusable link? That's what else it could have been. But again thank you for clarifying my first guess was the right guess..

[@paulemerson4476]

Number one, it's easier to pee than doing a number two... When about two hundred amps go through your ass or your heart. But that is unlikely because 12 v won't shock you, isn't that shocking? Not enough voltage, yeah plenty of amperage, but if electrons can't pass through you, it's like a little girl kicking you in the shin.. annoying 😅 I don't know you might be able to use a diode out of a old microwave. And hell that transformer in there will sure do some tac welding., But you better watch out, that shit will fry your cookies, I think they put out about 6000, but Not much ambridge, still yet you'll be looking like Einstein your hair all in a fizzle. But you can use one to do tack welding or even with a stick. Just got to do some modifications, that info can be found. Keep On keeping on

[@jordyboi69420]

I think I'll stick to the microwave transformer method. Or just buy another welding machine. They're not as expensive as they used to be

[@onkarsingh7608]

Oh yes, m I maked,,,, ist super& super your idea 💡 sir.Thanks!

[@IzzieShnizie]

awhsome idea what is the thing you soilderd on the batterie called

[@gerlandkent6377]

Thank, you for you're video.

[@aswingsharif6729]

EXTREMELY DANGEROUS!!!! Not recommended.

[@dmitrym2922]

Why?

[@scaredcrew]

@@dmitrym2922 because spot welder use low voltage high current which is ideal. But what he is using is gonna damage ur battery if you gonna weld using this

[@limabravo6065]

It's a 12volt system how dangerous can it be? I've been zapped by the ignition coil it's not that bad. Now if you fuck up the spot weld on the lithium ion battery that can be unpleasant what with the fire amd such

[@TheSpinninHead]

Nice idea. Can it weld 5mm thick copper wires too?

[@nebo274]

Copper cannot be welded. It has very low resistance.

[@izzetacur412]

Eline emeğine sağlık güzel olmuş

[@helmikadarusman7010]

INI YG BIKIN SPOT WELDING TEMEN NYA SI UCUP...

[@au937]

*Soo DANGERROUS*

[@robertcyrusbalaba4288]

Stainless lang ba ang kaya niyang I weld?

[@ImLeeAT]

Can someone explain why the two parts do not stick together at 5:25? I build a different setup, but have same problems. Parts ether melt, or do not stick together

[@ugenegareth9339]

I answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times. 78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways. 81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times. 88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders. 92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the unrighteous wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come; and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified. 99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations." 102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the unrighteous or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." .....2 Esdras 7:75 /////////////////

[@SUPERDRUMER]

Batery will blow up!!

[@ashishblog3536]

Are bhai ye to dangerous aag laga deoge

[@riglisdimitri]

Ha Ha Ha you're right everybody thinking to be a professor....😂😂😂😂😂😂😂

[@mohdhafizify]

after it's over..the diode disappears suddenly, right?

[@mailuser1335]

Can a car battery be used for this? What is the part number for that diod? Thanks in advance

[@alfa-tech7784]

yes

[@DiffEQ]

The diode is stupid and didn't survive. Do you see it in the end demonstration? No... it blew the first time he tried it and it served NO PURPOSE to begin with.

[@CPUDOCTHE1]

He obviously had enough power from the battery he was using. A car battery would just deliver more power. The part number for the diode would be BLWN2HELL.

[@ravips698]

He needs to use steel nails for electrode to ensure better resistance than copper. If your voltage can be reduced to 3V then copper is better else battery will get damaged.Good idea though I prefer a 3V source

[@jaaa2055]

it is good for welding thin metals but for spot welder supercapacitor is better

[@timothy2935]

Can you explain your comments further please bruh, I'm working on a 1977 toyota pickup and cutting put a the rust , only the body has rust thank God haha 😂 but I need to replace my flooring in The cab , especially in the front part of the cab, where the factory bolts the cab to the frame near the engine firewall it's completely rusted away like there's nothing g holding the body to the frame anymore , i can't afford a welder at the moment and I need this truck for work so I've been looking for ways to weld new flooring in. In also building a full roll cage hidden Inside the body , reinforcing some stuff on the truck since I'm tripling the HP it has currently. All new adjustable coilovers front and new adjustable 4 link coilover in rear to replace the leaf springs , new disc brakes front and rear, HEAVY sound deadening for floor,doors,roof and heavy duty weather stripping replacement. Lowering it a bit to help with handling at high speeds, no power steering ... anyways I'm excited AF for the build trucks factory original everything and everything works except it rained heavy one day and my speaker(yes truck has 1 single speaker ) lol went out. Anyways until I can afford a welder I have to make do with what I got 😂

[@jaaa2055]

@@timothy2935 it has not enought Amper to weld solid car body, you need proff spot welder or MIG

[@lorenzo4262]

at 4:28 is a diode to protect battery? which type?

[@wickgrover2744]

6A4 = 400V 6 Amp

[@henryharmse4003]

How is the diode protecting the battery?

[@MangaleGurung-j9y]

Very great 👍👍👍 job

[@marc-andrelauzier1587]

It'll work but keep the fire extinguisher nearby haha

[@hirarajvasarnikar]

Will this work on my broken rayban ? ?

[@coolcraftandtech]

Hello I'm your 1 millionth subscriber your videos are amazing

[@RajSingh-hi8tv]

Bhai diode konsa used kia h esme

[@nobleknight6265]

What is rating of diode used here?

[@waynemasters8673]

Bad idea rating

[@jagtarsinghmehra4108]

You are genius 🙌🙌🙌

[@kumarmahesh748]

Why are the solder joints not melting? It means solder has higher melting point than iron or aluminium and if it is so then we can use soldering iron for welding

[@shashithakur557]

7

[@indra-fu1ew]

That's because soldering tin has lower resistance than steel he spot welders it, but honestly this video is a junk. Someone with enough understanding will know there is no diode needed for DC current.

[@codigosmontoya6181]

Saludos de JOACIN MONTOYA, inventor de escritura global y codigos Montoya... Dónde se puede hablar sin abrir la boca..

[@jeffcantley9203]

Mark my words it's coming I don't know when but that battery will explode when you short it across the metal like that they're not designed to do that type of work I have worked at battery places in the past and have seen it happen many times over people accidentally shorting batteries and they explode

[@bhupendradesai3402]

Which item fixed with red wire n battery I think it is diod? Reply please

[@diymaster101]

Very nice bro I will definitely try thanks

[@anthonyrybczynski5420]

How did you get your hands dirty, only on the back?

[@Debraj1978]

Why have a diode in series?

[@redpost2380]

Soldering a wire that will heat up to hundreds of degrees Celsius? Note how the timber handle is brown from the heat... releasing all those toxic fumes from the burning epoxy. This a children school project that should be supervised and then disposed of by a responsible adult. But with millions of views the clever creator is enjoying the $$$ of his effort

[@clixium]

If that's a machine I'm Leonardo da Vinci. Usually machine consist of some moving parts, yet you have none,, it's a 2 pieces of wire and a 6V battery,,, Where's dislike count yt?!

[@6023Nath]

Boom! Nice trick. :)

[@ivanchan6371]

Use ac to 12v dc adapter will be save and without harming the battery will do the job.

[@capju854]

good idea, needle must be copper, better than metal, may need register to protect overheating?

[@kenhnghiencuuientu2550]

Bạn là một chuyên gia sáng tạo công nghệ

[@rohankumar1807]

What if we parallel connect ten 1000uf capacitor and charge it with this battery and then use that charge capacitors as a spot welding machine. Does it work or not?

[@patjimenez9437]

​ @Catalina Ramirez keen observation, no diode at all. May lower power output if diode in place, and Higher output without diode but will make battery shortlived.

[@DiffEQ]

Uhm... that diode served no purpose and didn't survive. That's why it's missing. Pointless and just plain stupid.

[@atulbava7416]

What type of diode should be used, plse provide the specifications of the diode

[@suryaudio6675]

Mantap bosku Hadir

[@GadgetzOfcourse]

I guess u don't perform with a lithium ion battery or else from the nxt moment we will no more get crazy videos from you.. LoL 😂😂😂😂

[@assassinlexx1993]

Just his very last one.

[@applemonkey_1874]

love the fact you put a diode in to prevent back voltage and possibly making the battery explode.

[@raafayumar8015]

Take a look at 5:02 , the diode is missing 🤔

[@applemonkey_1874]

@@raafayumar8015 he must have edited it after and put the diode in.i would never do this without one.thats just asking for trouble

[@henryharmse4003]

Back voltage wtf is that

[@applemonkey_1874]

@@henryharmse4003 when voltage goes to one point, hits resistance or is shut off.the electricity needs to go somewhere so it goes back where it came and that could cause damage......prob not the best explanation for it but thats how i see it

[@CPUDOCTHE1]

The battery is the only power source. There is no other power source to drive current INTO the battery. No diode needed other than to provide some smoke and light on first use. His diode did not limit the current to 10 amps. It self disassembled and let its smoke out shortly after the current exceeded 10 amps.

[@iffee100]

There is no role of rectifier. As evident he in his final demo used it without diode. I think he added diode to fool us. More over using battery in this way may explode. There is better way to do it instead of diode add a 2.2-5 Ohm /10 watt resistor and at the out put add enough capacitors of 16V ratings. Any one can comment on my suggestion. Thanks

[@whitefeatherslinger8194]

Way to strong for like quick lithium battery fixes ie the spotweld comes apart with a lower current u could use this to re solder the spot weld