👍👏 Your video has given me great help and interest in Creo. Thank you! from S. Korea
@CADPLMGuy2 жыл бұрын
Glad it was helpful!
@sevencartes3 жыл бұрын
Hello Nice video, thanks You can also approximate curve at the beginning (copy curve), it s allow to get a "single" shape.
@CADPLMGuy3 жыл бұрын
At some point I’ll do a series on Copy and Paste / Paste Special when I feel like finally tackling all those dependency options.
@guilhermelima68272 жыл бұрын
Hello, David! Hope you are fine! My name is Guilherme Santos, and I am currently looking for Creo tutorials regarding surfaces and I found your (amazing) playlists on KZbin, specially Surfacing, Freestyle Surfacing, ISDX, Offset Command. However, I did not find in your websites the models to try to reproduce the tutorials. Can you please share parts by e-mail or some dropbox link?
@fulv_uk2 жыл бұрын
Really helpful tutorial, thank you very much for showing it.
@RnioBB5 жыл бұрын
wow all tis time i struggle to add entities into 1 chain(with the usual thinking Cntr) the solution was the Shift key TANK YOU! I would like to ask you were we can find such as this documented details on commands?
@CADPLMGuy5 жыл бұрын
Apostolis, I'm glad I could help. I agree, the whole combination of using SHIFT vs CTRL is not immediately obvious. Part of the reason I make these videos is that this information is not readily available to users. It is in PTC University if you have a subscription, although I find their material a little dry and boring. It's also in the PTC Help. If you've seen that, it's also not the most electrifying reading.
@SeanMcDonnell335 жыл бұрын
Amazing video! Thank you very much. Could you also do some videos on creating curves within ISDX?
@CADPLMGuy5 жыл бұрын
Eventually... once I get a license of ISDX...
@alessandrojosue6563 жыл бұрын
I know im asking the wrong place but does anyone know of a way to get back into an Instagram account..? I was stupid lost the password. I appreciate any tips you can offer me!
@cooperrylan27643 жыл бұрын
@Alessandro Josue Instablaster ;)
@alessandrojosue6563 жыл бұрын
@Cooper Rylan I really appreciate your reply. I found the site on google and im waiting for the hacking stuff now. Seems to take a while so I will get back to you later when my account password hopefully is recovered.
@alessandrojosue6563 жыл бұрын
@Cooper Rylan it did the trick and I now got access to my account again. I'm so happy:D Thank you so much, you saved my account!
@hodshonf5 жыл бұрын
Can you touch on STYLE and G3 curve and surface connections? I had a PTC support ticket opened and they gave me a great tip for a troublesome master surface model. There was one last patch i couldn't get to G3 - they had me create a CURVE FROM DATUM in STYLE, increase the quality, and bump the degree to 7. That worked, but it's still hit or miss as a general modeling method in STYLE. Thinking NX or Catia may be better CAD programs for true G3/Class A. thoughts?
@CADPLMGuy5 жыл бұрын
Honestly I have extreme difficulty seeing the difference between G2 and G3 surface connections visually - my eyes just aren’t attuned to that level. I can use some of the analysis tools to tell that there’s a difference. To me it’s like how to distinguish between good and bad modern art. Also I haven’t done much Industrial Design in the years since PTC added G3 connections. We used ISDX at Lab126 but Echo and Fire TV were simple shapes obviously. On Prime Air and Blue Origin we keep away from too stylistic surfaces for manufacturability. I just don’t have the experience to comment that deeply about G3.
@hodshonf5 жыл бұрын
ok
@jamesmansi2 жыл бұрын
thanks!!!
@shameerali17734 жыл бұрын
Thank you so much sir
@CADPLMGuy4 жыл бұрын
Most welcome, Shmeer!
@vinod27755 жыл бұрын
Sir pls start a tutorial videos for beginners...(from the basic simple model to assembly models) and pls show some sheet metal based videos .....I am finding your videos are more helpful for students and profetionals and your explanation is awesome pls keep it on sir thank you
@CADPLMGuy5 жыл бұрын
I do have those videos. Please see the Creo Parametric for Absolute Beginners playlist for starters.
@CADPLMGuy5 жыл бұрын
Playlists: Creo Parametric for Absolute Beginners kzbin.info/aero/PLRhPac0z_f-Ha215v0bMebSdZvC1RJGrL Basics kzbin.info/aero/PLRhPac0z_f-Gl7aYKojTgbL5Juz6HHS4d Sheetmetal kzbin.info/aero/PLRhPac0z_f-FVsSyuMnE5dk2fkK3tv1xn Over 50 videos which should get you well on your way in Creo Parametric. I hope you enjoy!
@vinod27755 жыл бұрын
Thank you for the response sir...
@CADPLMGuy5 жыл бұрын
Thanks for subscribing!
@honaxanh43955 жыл бұрын
Hi sir..i see your chanel is very helpful,, i working manufacturing ( milling).do you know the chanel about that.. thanks
@holymolycheetos5335 Жыл бұрын
Can you build a G2 continuity surface without darwing style curves using the boundary blend feature in creo?
@CADPLMGuy Жыл бұрын
Yes
@mahmoudibrahim5556 Жыл бұрын
Hello Dave, are the training files available for downloading?
@andrestaim3194 жыл бұрын
Hello I have played with boundary blend whole day and for some reason I can not use second direction. Does the lines have to be connected to each other with some special way? Can you show how you draw the lines for boundary blend?
@aliabouelazz4780 Жыл бұрын
yes i have the same problem i can't use the second direction have you found the solution?
@turbojspeed13602 жыл бұрын
How did u draw this for developing the curve.
@turbojspeed13602 жыл бұрын
Actually how did u connect the ends
@CADPLMGuy2 жыл бұрын
How did I draw what? The network of curves are either 2D sketches or curves through points.
@turbojspeed13602 жыл бұрын
@@CADPLMGuy sorry sir. I didn't get those ends comnected. So I was figuring it out how to get those ends comnected 😁😁😁
@CADPLMGuy2 жыл бұрын
@@turbojspeed1360 I still don't know what ends you are talking about. I'm sure the problem is clear in your mind, but you haven't explained it clear enough for me to understand what exactly you are referring to.
@turbojspeed13602 жыл бұрын
@@CADPLMGuy first of all I'm really sorry for my english. 😁. The issue is. There is a base curve and a set of curves that define it's surfaces. How does the ends of guiding curves meet the base curve