CRICUT FOR BEGINNERS: Everything I wish I knew when I first started!

Hi friends!! Happy New Year!! Did you receive a Cricut over the Holidays? Or maybe you've had one sitting in a box at the back of your closet for a couple of months/years? My goal today is to get you feeling less intimidated and MORE MOTIVATED to jump into learning how to use your machine! I've put together a list of some of the things I WISH I knew when I first got my machine! This is not a sponsored post, these are just tips and tricks I've learned along the way. If you've found this video helpful, feel free to leave a like/comment so that I know you'd like to see more Cricut videos! If you're feeling overwhelmed, you're not alone! Just know, you can figure out your Cricut with the help of our online crafty community!
Here is the link to see what it was like when I first unboxed/used my Cricut in 2018. Looking back to this video and seeing how far I've come just goes to show that if I can master my Cricut, so can you!! • Cricut Unboxing & Firs...
2022 Updated Note: I am no longer affiliated or associated with Auntie Tay Media Inc in any way. Please do not use my coupon codes or old links for those sites.
💜💜💜💜COME SAY HI ON MY OTHER SOCIALS!
Instagram: / thefoiledplan
Facebook: / thefoiledplan
TikTok: / thefoiledplan
💜CHECK OUT MY WEBSITE💜
www.thefoiledplan.com
📦 SHOP MY AMAZON STORE FOR MY FAV SUPPLIES 📦
www.amazon.ca/shop/thefoiledplan
Shopping from Canada 🇨🇦 use this link⤵️ www.amazon.ca/shop/thefoiledp...
Shopping from USA 🇺🇸use this link⤵️: www.amazon.com/shop/thefoiled...
💚 SHOP CRICUT.COM WITH MY AFFILIATE LINK 💚
cricut.pxf.io/WDoGyM
💙 SHOP TECKWRAP CRAFT VINYL 💙
teckwrapcraftaffiliateprogram.sjv.io/1rydbR
🌍JOIN THE FACEBOOK SUPPORT GROUP🌍
groups/38546...
Thank you for shopping using my affiliate links and coupon codes! When you shop using these links/codes I earn a small commission at no extra charge to you, which allows me to continue creating fun, free, crafty content for you! 💜💜

[@dawnejohnson4870]

I haven’t even bought one! Just want to convince my self I need one 😂😂😂

[@milasmommyy9065]

I love this comment lol soo me

[@Mixing-It-Up-with-Gigi]

I bought one used on OfferUp, wanted to make simple stencils I usually cut myself. However, my arthritis is getting too bad so welcome to me again. I hated it, the a,s and e,s for example doesn’t bridge the holes! Now, I bought the cricut maker, actually hubby bought for our 36th anniversary- so now I’m watching tutorials and simple projects. .I created a small sign for a craft show upcoming this after only a slight lesson. I see the bridges still aren’t on letters with holes. Any suggestion? Thanks?

[@kristenflannery3092]

Girlll i just convinced myself to buy one, 2 days ago.. And have noooo idea what im doin at alll, just got a tablet off amazon to use with it aaaand ordering a heat press lmao and have no idea what im doing, but it'll be fun im sure!!! Staying soo positive...

[@fleadawgthemomshelton9780]

@@kristenflannery3092 mine will be here tomorrow lol going to order press now! good luck!

[@MiGalletas]

Same lmaoooo

[@MadeaNH]

If you take a marker and write the word “on” on the protective sheet, when you’ll know it’s the correct side because of you put it on correctly it will say “on” and wrong will say “no”. Just a tip.

[@Alleellaa]

Clever and useful!! Thank you

[@elizabethperry4346]

How can you tell which is the right side …. Never knew this.

[@MadeaNH]

@@elizabethperry4346 you write on it before you ever remove the film. That way there is no question as to which is the correct side.

[@jakobozias7613]

I went and did this. It's working really well so far

[@MadeaNH]

@@jakobozias7613 glad it’s working for you. ☺️

[@user-df8df7tf2r]

Thank you for sharing. I am 70 years old and just starting my journey with DIY'ers and my new Circut. You have given me hope, thank you.

[@EianneLadyMami]

I know this video is a few years ago..but it was very helpful for me..since I've waited years to purchase one..once I got my art room... now I have one.. 🎉

[@sarah28681]

One tip I wish I had know many years ago when I started is if my material doesn’t cut all the way through or if I am worried it didn’t cut all the way through, I check before even unloading the mat. If it didn’t cut all the way through you can push the c again and it will cut again. Because if you unload the mat it might not cut the same

[@yuyi1226]

great advice, thank you!

[@makeartcda4294]

Great tip

[@angelagrumpy962]

I just got mine for Christmas and haven’t taken it out of the box yet. Just watching videos. I’ve heard this several time “it may not cut it all the way through” how do you know that before you take it off the mat?

[@Teacherbarbara23]

It will?!?! 😳 I wish I had known that!!!

[@Teacherbarbara23]

@@angelagrumpy962 you can feel it

[@angelamccarthy4460]

Your presentation of all of the info you shared was not only helpful, but you made me feel like I was a friend right there with you! You shared your thoughts intimidation and other feelings that all of us feel as beginners, and did it with such a sweetness and casualness! I have been watching “how to” videos for 3 months now, and I am walking away from yours feeling confident enough to give it a shot, and safe enough to be ok if I fail miserably. Thank you! I will definitely be back to watch other videos you post!!

[@tiajohnson5240]

I so agree with you Angela!

[@KaatMartinez]

Same feeling ❤️

[@mittycat89]

I've learned almost all of these lessons on my own but stuck around to watch the whole video because I had the same feels.

[@Alleellaa]

I’ve had mine since Christmas (it’s July 28) and I still haven’t used it because of that “perfection” mindset. She made me feel better about this too! Glad I’m not the only one ❤️

[@MBlessingHands]

kzbin.infoO4Ga0CcnueA?feature=share

[@teresainbc1496]

Ok - She's Adorable! Just bought a Maker 3 and watching some KZbin vid's. Lots of content out there. Lots of annoying crafters. This girl is immediately likeable and seems knowledgeable, sweet and humble. "Subscribed"

[@Cosmicoo82]

Me too! The older I get, I’m having to visual listen to instructions instead of trying to read them🤣

[@dragonfireishot]

I e had my Air 2 for like 2 years and haven’t used it once due to intimidation. I watched this and now I feel like I’m ready! Thank you for posting this!! 😊

[@Jewelies42]

Me too! Good luck!

[@liznimphius]

I just bought an Air 2 and came across you when searching “how to’s” and now you and I are best friends. Thanks

[@natashahenson5671]

Ckear contact paper is what i use for teansfer tape. Its only like 4 bucks for a gigantic roll at most walmarts. A ton cheaper than actual transfer tape and works just as great

[@sleepykirsty]

I just bought my first roll of the cricut transfer tape tonight... taking it back tomorrow 😁

[@victorianoel2814]

Whats the brand called that you buy @natasha henson

[@victorianoel2814]

Whats the brand called

[@michellespicer2319]

I was curious if I could use contact paper in my Cricut Explore 2 ? Also I was curious, I just bought a printer, will I need the printer,scanner or copier during any point in using my Cricut?

[@librasapphire7830]

Clear contact paper?

[@Lacroix999]

One thing that’s also important to note is that when doing research as to how to do something in Design Space, make sure you pay attention to the fact that not all operating systems run Design Space the same! If you have an Apple product, it’s going to look different from someone doing so on something else, as well as from a tablet or your phone or home computer! Not all of the features are the same in the app across the board as well as all the features are not going to be in the same place or even existent at all in each one. It may take a little bit more effort to learn how to run it all when keeping this in mind.

[@JayrayEasthampton-tb4hs]

Circuit ez press don't get. Definitely get the little $50 one and sissor $300 press from Micheals. Circuit does now have a clam shell press but I haven't tried it. The vinyl would unstick off my T-shirt s after a few washes. ( I lost to much money remaking t shirts)

[@victoriasmith2965]

This is true. I recently bought a cricut maker 3 and here, I can't make stuff because I only have windows 8. The help line said I need windows 10 for it to work properly 🤦‍♀️

[@samanthathomas868]

When my weeding tool gets dull on the tip my husband uses his knife sharpener to bring it back to life. Just a tip for any fellow penny pinchers like myself 😁 Thanks for all the info in your video. I am making some changes and I think some of your insight will help.

[@nicolassmith456]

Hi pretty lady. How are you doing today???????

[@callmeclaireee]

I was half expecting you to say "if you’re working with a sheet, slap that *shit* right on there" lmfao I’m so happy you left that in the video 🤣

[@simplyme9473]

I use clear book vinyl cover and contact paper as transfer from the dollar tree. My weeding tool from freight harbor and I bought my sticky mats from Amazon for less then $20.00 for three. I only buy vinyl from cricut when they are on sell for $5.00. I learn to substitute things for less.

[@biancac9226]

Ive wanted a Cricut for a few years now, and my husband just bought one for me for Christmas. Ive had it for about a week now and have only done one project (which was a premade design). After getting set up and beginning in design space, let me tell you, Ive been overwhelmed and intimidated about the whole thing! I thought in the design space program there would be a beginners guide with step by step tutorials on how to make different projects, but so far from what I've found there isnt. It seems you have to depend heavily on youtube videos for help, and Im more of a hands on learner so its a bit harder for me to learn just by watching videos. Your video is one of the very few I've watched so far, and your whole demeanor just seems so genuine, and you seem so relatable! Your channel is my first subscription and I will be watching more of your videos!

[@raynabean620]

I'm right there with you. I've had mine for a year, and made one pre-made item. I need a cricut for dummies book. I'm so lost! Good Luck

[@RealEstateHer]

Good luck to you. Check Angie Holden channel. She’s great and not only talk through steps but she instructs on projects. 💕

[@ummyaasir129]

I can so relate to your feelings..... I've had my cricut machine for about 2 years ....opened it my first day did the sample pre designed project and felt great. While searching through other projects I started to get overwhelmed with not knowing exactly what to do, where to go, how to navigate you name it!!! Now I'm here on this journey thanks to my husband sending your link to me...looking forward to learning with you and all of your crafty subscribers 🤗

[@susiebrynjulfson3146]

I have had mine 3 years and I'm still intimidated. I've only made a few things, its very sad.

[@sharonmueller2703]

I used Christmas gift money for mine. It's out of the box. Haven't even turned it on yet.

[@myrnag7749]

Thank you so much for your well spoken video. I’m a 70 years old grandma so it takes some time to understand all of this. I’m so happy I came across your channel. As your new follower , I can’t wait to start using my air explore 2 that has been in its box for a year now!❤ Can’t thank you enough!!!

[@monawiafe8003]

Selfless woman with wonderful tips. Adorable to watch and listen. Thanks 😊

[@TheFoiledPlan]

Thank you so much Mona!! You are so kind 💜💜

[@angieemm]

Another money-saver: you can use Contac paper as transfer tape; it's much much cheaper! For small things, I've used painter's tape just slightly overlapped and it's worked perfectly.

[@lisahecht9360]

Thanks for the tip!

[@britt7141]

I think it was very important that you ended with "practice before you sell!" because its 100% true. I've yet to get a complaint with my hand dyed yarn business but the excitement of making a sale in the early days was almost overshadowed by the anxiety of someone possibly being displeased with my work/product! I totally hold on to those moments too.

[@jessicab2693]

Dawn dish soap for my mats, let dry and they're good as new!

[@jeanne1271]

I just bought the mint green one at Target on sale for 169.00 and I got a 20$ gift card !! So excited !!!

[@jrlmfowler]

You rock for this info!!

[@marcciiieeee]

omg “if you’re working with a shit” i’m deaddd 😂

[@TheFoiledPlan]

Haha I was SO close to cutting that out and I was like nahhh I’ll just leave it 😂😂😂

[@Gospelgirl454]

Lol

[@CarmaDee7]

@@TheFoiledPlan I couldn't stop laughing!

[@YogawithAliBeale]

I keep bloopers it's the best part. I feel like someone out there is resonate with my golden moments 😂

[@sleepykirsty]

Yes! I was laughing so hard my kids were like "what, mommy, what's so funny?!" 😂🤣

[@pennykeller881]

Fantastic information, thank you!

[@stevekobb3850]

So helpful! Many thanks for sharing.

[@ayastaley]

Sooooo glad I found you! Thank you so much for helping us out. You're a super human :)

[@rosac8168]

Wow! I am so glad I came across this channel, Ive started my sewing quest again once we were home due to the pandemic and I wanted a cricut for the longest time to venture into new projects. I agree with most of the positive comments that ive read so far and agree it's overwhelming the different types of machines and all the tools and not to mention the prices of all the cricut brands and how to use them, so I decided to wait and just browse youtube to see what makes sense for me. With that said you just got a new subscriber! Thank you so much :)

[@michelleb6574]

the "if you're working with a sh*t" moment killed me hahahahah-- thank you for making this video, so so helpful!!

[@TheFoiledPlan]

Hahah glad you had a laugh 😂😂😂 I’m so happy you found this helpful!! 💜💜

[@loricoleman4909]

I can not believe how much transfer tape I have been wasting! This video was so super helpful and YOU are great at making us feel comfortable and that it is ok to make mistakes…we learn from them!

[@tammyussery2506]

Knew most of this stuff but watched anyway and really enjoyed. I totally love, love, love the peg board of supplies!!

[@Mindgame261]

Really good tips, thanks!

[@ellenodonohue4511]

Your explanations are so helpful!!

[@obxshelly]

I love your spirit! I'm subscribing based on that and the fact that you do other crafts as well. I'm into variety crafting; always bouncing around and trying everything that looks interesting. Thank you for your knowledge and I look forward to watching more from you. 😃

[@HizAngel91]

I am very grateful to have found this video!! I have so many ideas but became intimidated by my first attempt with the Cricut Explorer Air 2. Thank you for being relatable, sharing your experiences, being down to earth, and for making the learning experience fun. You ROCK!!!!

[@tracyelizabeth2178]

Ahh the mats info, very helpful!!!

[@beckyanderson856]

VERY helpful! Thank you!

[@lesliethrasher3755]

You can find those little dish scrapers at dollar stores too. Just a note.

[@Lovelifeandtravel]

This is one of the most helpful videos I have watched! Bought my machine today (mine is mauve so would match your room) and am so nervous to get started. Will look up some more of your videos. Also love that you kept in the ‘sh*t/sheet thing. Haha. Keeping it real.

[@bryanpark3980]

The transfer tape tip alone makes this a video worth watching

[@dauntingannagaming750]

I just subscribed! I absolutely love the in-depth detail that you have shown in your video. This is the most information that I’ve gotten in one sitting. Thank you so much! I was sitting here thinking that I had to buy everything to start off and now I know what I need more. ❤️

[@shanicejackson2839]

I like that you give a brief summary of what your channel is about before encouraging one to subscribe....it surely convinced me to subscribe and I’ve never seen you before (except for that minute and a half lol). I’m excited now though😬😬😬

[@KatieCottingham]

I just got a maker this past weekend after years of researching and contemplating. I have to say, yours is the most relatable and genuine "getting started" video I've found in probably 4 years of watching videos and still just doing things the manual way (ie. LOTS of fine detail xacto knife work). Thank you for all the thought you put in this!

[@tawnyascherck5806]

Thanks for all these great tips! I am feeling way more ready to try this! Thanks!

[@carmeniori6796]

awesome tips! great video ty!!!

[@marysandifer1784]

As a beginner I have watched a lot of videos and you give my mind ease and feel so genuine. Thank you!

[@nickysonder1893]

I just got my cricut in, and I was a bit intimidated to get started. This video was a great help and motivation, thank you for making it!

[@trailridingemt4514]

Thank you for the encouragement and the information!

[@sillor2]

I love this! Thank you!

[@maggiezuchhigday6153]

I just watched this video. Very informative and I so appreciate that you talked slowly. Thank you.

[@CaffeineLessonPlans]

Thank you for this!! Just purchased my Explore Air 2, and this was super helpful! Also, your “slip up” cracked me up! 🤣

[@carriefeil7990]

Very helpful video! Thank you!

[@gabl3400]

Super helpful, thank you!

[@TheFoiledPlan]

A little note: the purple mat is more for thicker fabrics like leather! There is also a pink mat for fabrics like cotton, I just don’t ever cut fabric so I don’t use the pink mats :) Also, aluminum foil doesn’t actually sharpen the blade, but rather cleans all the debris and whatnot from it, so that you can truly take advantage of the sharpness of the blade! I hope this helps 💜

[@debbymccormack6525]

You touched on the clear covering for mats. You said the sides were different but didn't go into detail. How do you know which side goes against the mat? Thanks in advance!

[@rachelwright3337]

Thank you! This video was so helpful!!

[@Mixing-It-Up-with-Gigi]

@@debbymccormack6525 I saw in a tutorial. I will try to find it. By a guy I subscribed to. I will tell you on pm if you allow?

[@sherrimarin1310]

@@debbymccormack6525 was there an answer to this question? I am curious.

[@debbymccormack6525]

@@sherrimarin1310 no :(

[@angelacherry3271]

Thank you for walking me through what you should have known. Ive just started making my own tumblers and I do not have a cricut. Its been kinda hard to come up with that kinda of money right now. As soon as I do have one your video has helped me out SO much. Thank you again for making this.

[@shesmeen13]

Great tips. Much appreciated

[@kimhennessy5919]

Loved this video!

[@lindeesanders6142]

Haley you are AMAZING!!! your videos are awesome I literally have learned so much from you, I love watching your videos you are so knowledgeable, the way you explain things and how friendly you are, I felt I was sitting in the other side of the table getting a personal tutorial, thank you, thank you, thank you, I'm so excited to learn this beautiful machine and sublimation oh girl you got my mind thinking, thank you!!!!

[@danmorgon6730]

I purchased my cricut during quarantine, then restrictions were lifted and I went back to work. I have now had my cricut for almost 2 years and have never even taken it out of the box. I have my own business and am a Grooming Salon owner. I had no idea just how much money this cricut could save me, or the free advertising I get by puting my logo on bananas. Thank you for giving me the courage to start. So easy, why was I afraid?

[@lynrob5491]

ty so much for all your info i cant wait to see all of your vids and being one of your foiled friends

[@TheLastMinuteSurvivalist]

Great video! Thank you for your help.

[@dianamarilyn7357]

This video was so helpful, my Cricut has been sitting in its box for a week and I finally unboxed it after watching this.

[@tiffvilla88]

This is the most genuine informational Cricut video I've seen thus far... and I had chuckled a little too 😀. Needless to say, I'm now a Foiled Friend!!! Thank you for sharing your knowledge!

[@SandraGonzalez-lw9np]

OMG! Love your honesty. Following you forever 👍🏻.

[@dmloomis]

Love the sticker idea for mat! Thank you!

[@mjdiemand3547]

I love that you didn't edit about 23 min in! Very sweet and totally relatable. I look forward to checking out your offerings. Well done video, I am a newb cricut owner. (Well actually, I am one of those who kept it in the box for a bit....)

[@lorenabort9717]

Thank you! I bought a used Cricut explore from a friend who was upgrading, that was the years ago...I haven't had the guts to take it out of the box! This was my week, glad I found you and happy you're also from Ontario!

[@mariahezra]

This was such an awesome video! Thank you for all the tips!

[@StraightUpRC]

THANK YOU SO MUCH for not cutting the SHEET slip out hahaha Made my entire day hahaha Getting one of these soon and your video helped! Thanks a ton!! Love the vids.

[@adrianoliver81]

Hello! You have a new Foiled Friend 😊 I just purchased my Cricut today and I have the Air 2. I have been wanting one for some time and figured, why not. This video was very helpful. Thanks again.

[@superkoopalingsnicky7825]

Loved your video. Thank you for all the helpful tips.

[@jackiez8582]

Very informative glad I found you.

[@manus21]

Nice video and I like that it doesn't seem sponsored and you actually tell people that it's OK to buy other brands than cricut. I know that especially new costumers usually buy the branded stuff because they feel like they need to...It's actually refreshing to see such an open and honest video :)

[@WaXiNgTaRoT]

Thank you for talking to your audience like we are sitting right next to you. You’ve got a personality that resonates with me. I’m about to embark on my crafting adventure with the Cricut. Subscribed!

[@joweston7036]

Excellent advice, love your style 😀

[@sandeebond4514]

LOVE THIS...."LAUGHING AT YOUR "BLOOPER" WE ARE HUMAN. THANK YOU

[@abigelzavodni3025]

Love the real advice you give about practicing before actually start selling your art or services !! I am in the Nail and Beauty industry in Ontario aswell and I see so many people posting services and crafts in marketplace and it’s blows my mind the confidence they have to be doing that when they are still just practicing or just started .. I studied and practiced on myself for a year and a half because I felt that my services would last and was worth paying for !!!!! And also obviously that knowledge you learn you don’t want to make those mistakes with customers and get negative feedback it would also stick with me very badly

[@thebookvandalshop5592]

This is the best and most helpful "cricut video" I've watched since I got my cricut for Xmas. Thank you so much for sharing your invaluable tips and for your friendly presentation.

[@livelaughlove324]

Thank you for being so real with us .

[@beavis0615]

Thank you for all the advice. It’s nice to know there are good people who want to do their best. Defiantly subscribed

[@KIP_KnowledgeIsPower]

Love the “sheet” language stuff-up being kept in the video 😆😆 #RealTalk Excellent video!! Haven’t bought one yet, only recently discovered what they are as I’ve only just started crafting… Well, haven’t even started crafting yet, I’ve been gathering crafting materials for 2yrs & have a literally overflowing whole room for crafting (stupid OCD, spent 2yrs gathering & organising rather than crafting😑) but considering getting one of these rather than continuing to spend a fortune buying pre-done die cuts ect. Great video!! 😁😁

[@rosac8168]

I totally get you- Ive done the same with my sewing room, more tools, wasted fabric , and organizing than actual projects; and since I also want a cricut but don't know which one to get that I know I will use, I decided to hold on and research.

[@tiajohnson5240]

I have a cricut maker. I have not even opened the box yet. I pray these tips work for me as well! Thank you!

[@bonnieparker9804]

I just got one too! It’s so intimidating, I’m dreading opening the box and trying it out! 🤣🤣

[@TracvM320]

My husband was so sweet... he got me one for Christmas and was so proud... I’m mortified lol- it’s in the box unopened- let’s open them together 😂😂

[@nicolasmith1107]

Awesome tips! I just got my maker and you answered so many questions 😊 thank you!

[@beautychick44mc]

I’ve been debating for over a year on which cricut I want to get. I’ll be watching more of your videos for sure. Love all the helpful tips.

[@meechel_.9386]

I love the ending about being anxious to start crafting definitely me but gotta follow my dreams!!

[@hmorion1]

Just a side note: Tools are based on what kinds of crafting you do. I use the spatula with almost every project because I work with cardstock. It helps to loosen the cardstock from the mat. I personally stick with just Green mats but do use paper towels with new mats to make it less sticky otherwise it's hard to get cardstock off of it till it's been used a few times. I use unscented baby wipes to clean my mats in between cuts as my preferred craft makes them dirty faster than other types of crafting. As for general cleaning I use dawn dish soap and soft sponge to do better cleaning of them. (1x/month) Please please do your research before posting information that isn't correct. You can not sharpen a carbide blade unless you use a diamond sharpener. All tin foil will do is potentially remove little piece that may have gotten stuck on the blade or adhesive if you do a lot of adhesive projects. A paper towel with rubbing alcohol will do the same thing. Thank you for sharing. It's great to look back on what you have learned and be able to ease the minds of newer users.

[@TheFoiledPlan]

Hi Orion!! Great points! Thanks so much for sharing :) I touched on the tin foil stuff in other comments about choosing my words better, definitely not wanting to mislead anyone! I hope you have an awesome day!!

[@jalexanderphotography6264]

So glad I came across your page!!!

[@cherigroves679]

This video was so helpful and down to Earth! Thank you so much!

[@claudialozano969]

I so so so appreciate this video! It was so nice to watch someone being real about the process and getting started! I wish you had more circuit how to videos! What other htv vinyls would you recommend. I currently am using Siser easy weed which I love but not sure what others to try. I haven't heard the best about cricut brand so I was hoping to get more recommendations,

[@DavesWreaths]

I am currently looking for my first Cricut machine purchase and wanted to get some research done prior to purchasing a unit. I stumbled on your video while searching for information. I have to say this video was so incredibly informative, jam packed full of information, and so articulated...it was just an abundance of information to help me in my first purchase. Thank you so much for this video!!!! Absolutely amazing.

[@rebeccarosas8935]

Thanks for sharing your experiences and tips! I rarely subscribe to channels, but throughout your whole video, I felt like I was listening to a friend talking. And I need more of that in my life! I’ve had my Cricut for 6 months now and I’ve been too nervous to use it yet.

[@imaniruz8429]

This video makes me fell so much better. I was super nervous and so many things you discussed i've already messed up on but OMG this helps. Thank you !!

[@memoriesmadeart]

I love the sticker idea for the mat sheet!!

[@mrsmcphate]

DITTO! This is borderline GENIUS, right? So simple but so effective!

[@MAGA24MakeAmericaGodlyAgain]

I am literally taking notes as I get ready to buy my first machine! I've also decided on the Air 2 to start with. Thank you for sharing your learning process! Subscribed!🌹 Ps: thank you for spelling "brayer" so I know what to look for! lol🤷‍♀️

[@sylviamendoza6316]

Just received one for my birthday yesterday. I’m super excited! Glad to have run into this video. Thanks!

[@jodymcgrath7390]

GREAT video. Excellent advice! Thanks 😊

[@MsBeaKay]

First video I’ve watched since receiving my Cricut Machine. Just want to let you know how much I enjoyed your video. You are very personable ,

[@lelliott1709]

First of all, I absolutely love your personality!!!! I feel like this entire video was just like a chat with a super laid back friend. I’m so thankful you shared your wisdom here. My fiancé and I have had a cricut joy for several months and we LOVE it, but I can’t do all of the paper crafting I’d like to do, soooo today, I finally did the thing and bought an Explore Air 2. I’m absolutely subscribing, because you are so down to earth and I feel like your videos are going to be Uber helpful!

[@rosar7658]

I agree with you Elliott. She is really cute! I loved her🙂

[@lisahecht9360]

I haven't bought one yet, I want one that makes shirts , decals to put on mugs or different things, but these things really intimate me, I do t know which one to get, my friend suggested the first one, but I don't want to be purchasing another in two months when I know what I'm doing, and can't make things I want to.

[@HomemadeWithYalda]

Thank you so much for this great video ! I just ordered mine today ! You have so many great advice and you are making us saving money for sure !

[@barbaracostabile7823]

Just getting started, really glad I found your video's! So informative, thanks so much!!

[@robinjohnston7986]

I love when someone is able to explain well and your ideas are wonderful. Thank-you so much!

[@TheFoiledPlan]

Hi Robin! You’re so kind! Thanks so much for checking out my video! 💜

[@shelleyvonletkemann6659]

❣️

[@kimberlywang1934]

By accident I happen to stumbled across your channel and SO happy that I did! This was really helpful for me personally as I'm about to embark on my journey as a beginner crafter! I've been so intimidated to get started so of course I jump on youtube to look for amazing tutorials, etc and HERE YOU ARE! Thank you so much for sharing your crafty talent, tricks and tips with all of us newbies!

[@rosac8168]

I agree - same here

[@ladybugjoseph8960]

I just ordered my machine I have a professional that is Huge and I can't use now I am ready to get started I love your videos