Awesome video, quick, easy and in layman's terms 👍👍👍
@WouterB765 жыл бұрын
Very clear explanation, thanks!
@johnpaulgarrett12 жыл бұрын
Great demonstration!
@pedroburgos16889 жыл бұрын
Thanks for the info, nicely explained
@bushbasher64482 жыл бұрын
Thank you straight to the point 👍
@streakyfish8 жыл бұрын
Very usefull, thanks for taking the time to post.
@MuddyBob6503 жыл бұрын
So wonderful. Thank you very much!
@MegaFREEAIR4 жыл бұрын
Thank u very much from catalonia
@ayebee12074 жыл бұрын
Thank you Aussie guy. I have the small pliers from my Father.
@albertoascari25425 жыл бұрын
I just changed my Cv joint and boot the large clip fits easy but I was a bit surprised to see the smaller clip didn't seem long enough to reach the around the boot I am misstified at this. I cant clamp it on as it doesn't even meet the other side of the clip it seems to short. It's from a big motor factors to the trade my local garage uses them. I am a bit peed off
@stephenlutz1238 жыл бұрын
thank a lot. very helpful.
@fatwalletboy2 Жыл бұрын
Short, sweet and right to the point.....thank you.
@darrencamason6768 жыл бұрын
Thanks ! now I understand ;)
@R5P20511 жыл бұрын
useful video, thanks for uploading.
@ALPINA52711 жыл бұрын
Sweet I have the special tool too.
@2pacnasgame3 жыл бұрын
Cv boot tie ? does this same size tie fit for 2014 Altima inner tie rod boot ?
@peterjennings8258 Жыл бұрын
Good video, where can you buy the dedicated Cv boot clip pliers?
@can-cruiser7 жыл бұрын
Thanks for posting. Cheers
@rubensolares37364 жыл бұрын
También se pueden instalar con unas tanasas y un desarmador plano algo muy fácil. No es necesaria la herramienta especial.
@diane-mn8ou11 ай бұрын
Were do you buy the better clamps??
@frundlemud Жыл бұрын
helpful thanks
@tk42702 жыл бұрын
Where can i get the better clips.
@mattcarlson87736 жыл бұрын
Where online can I purchase these?
@collinclough26687 жыл бұрын
have a leaking boot and the clamp moves can I tighten it
@alexjohnson26093 жыл бұрын
You could. But this won't be much help after 4 years
@jamesheath7596 Жыл бұрын
Hi could you tell me where I can purchase your clips from please.
@abdulgani84322 жыл бұрын
🙏🏼💐👌🏼👌🏼
@deuce68686 ай бұрын
Where can i get the better clips
@grunherzjg-54435 жыл бұрын
😎🇺🇸👍
@jaxonsuperman10 жыл бұрын
thanks top work
@amana14805 жыл бұрын
2:05 The dimple is there purely to add strength...
@NitroNuggetTV2 жыл бұрын
So it doesn't fold and protrude outwards after crimping, like he said...
@collinclough26687 жыл бұрын
can u tighten then I once on??
@youaregoingtolovethis7 жыл бұрын
Usually not with those tools as clearance is often an issue. You can but you need a special more expensive version. Look up offset cv boot crimping tool or offset cv band tool. Make sure to only get the best quality tools and ties. You don't want to have to redo this anytime soon. Good luck.
@jonnyhifi6 жыл бұрын
I don’t see what’s wrong with a nylon cable tie - it seems like a better mechanical solution. These things are needlessly difficult, with a lack of adjustment, and one time only use. Dreadful design even if common.
@albertoascari25425 жыл бұрын
I think cable ties slip of easy and might not pass the mot. I tried that and it didn't hold the boot on
@marleythechameleonandherbi27245 жыл бұрын
A nylon cable tie? Are you insane?
@jamiemccort83884 жыл бұрын
jonnyhifi Cable ties are ok for a quick temporary fix, but not for a permanent one. They almost always end up slipping off.
@skip741x32 жыл бұрын
@@marleythechameleonandherbi2724 im pretty sure he meant one of those super Thick ,heavy duty zip ties they are almost as wide as the metal clamps..Ive used them myself and they are Strong! but since its plastic, it will succumb to heat ,oil and age and could over time go bad... metal crimp clamps, u set and forget.
@Law_Abiding_Citizen_ok2 жыл бұрын
There’s a clue in the name it’s a ‘Cable Tie’ !!!!!!! Not meant to rotate at high RPM and vibration in extreme conditions, by all means use one but it is ( very ) likely to fail long before any of the other components you just replaced, Have you noticed that the ‘Lock’ on a cable tie brings the two legs in at 90 degrees and not in line so it is very difficult to get it tight and flush on a round object.