CROSMAN 357 BLOWS OLD SEALS 800 psi PRESSURE...WATCH

[@chaunceywhite9517]

Where can I get parts for the 357 CO2

[@airgunshootingandoutdoorch4260]

Agences Gravel Inc, 5175 John Molson Quebec QC, G1X 3X4 Canada Thanks for watching and commenting👍👍

[@LowkeyAirgunner]

Even not tightening the screw fast enough is stressfull I can't imagine having a leak like this! Haha _I dont know if those gloves are rated for frozen gas._

[@airgunshootingandoutdoorch4260]

This happened before with my 38T so I was half expecting it. The disintegration of the 12gr CO2 seal was a BIG hint that this would have happened. I was lucky that the gas exhausted too fast to cause burns to my hand. I guess i should press my luck and go out and buy a 649 or Maximillions ticket.😁

[@5hawks]

@@airgunshootingandoutdoorch4260 Do the 357 and 38 have the same valve and seals? Just curious. I've found that the exit end of the valve stem seal is a problem.

[@airgunshootingandoutdoorch4260]

@@5hawks Not sure as I had to source the seals for the 38 from a Third party. I will be taking apart the 357 this weekend and will try to do a comparison.

[@airgunshootingandoutdoorch4260]

@@5hawks Just checked the parts list of the two. The only two similar parts are # 38-128....end seal for the12gr CO2 cartridge and part# 38-130... O ring in the valve assy. ( closest to pellet clip)..I only saw #38-130 on the parts list of last version of the 38T in .177 cal. The older versions carry a different part # hope that helps

[@5hawks]

@@airgunshootingandoutdoorch4260 Thank you. I saw the innards of a 357 on another video. Looks completely different.

[@bangWarkop]

Keren banget pistol nya

[@airgunshootingandoutdoorch4260]

Thanks for watching

[@brianmckinlay9314]

Mate has same one good fun 10 repeater

[@airgunshootingandoutdoorch4260]

@@brianmckinlay9314 I finished the repairs yesterday. Will try it out today with some Gamo Match 7.56gr single and double action . Thanks for watching.

[@cakPrasGravicc]

the gun is good