#Crossover

#Crossover Active or Passive ? Which is Best ? कौन सा क्रॉसओवर बेस्ट है ? #DJCrossoverSetting
#HowToConnectDJEquipments
#WhatisCrossover
#2WayCrossover
#3WayActiveCrossover
How Active and passive crossover works. Which is best in these? After watching this video you will not use Passive crossover further.
Buy from here. क्लिक कीजिये और खरीदिये
amzn.to/2Wx8TWx
amzn.to/2WPwVe4
amzn.to/35XrqOG
amzn.to/3ctxLDP
amzn.to/2WUEgci
www.amazon.in/...
www.amazon.in/...
www.amazon.in/...
Audio crossovers are a type of electronic filter circuitry used in a range of audio applications, to split up an audio signal into two or more frequency ranges, so that the signals can be sent to drivers that are designed for different frequency ranges. Crossovers are used in loudspeaker cabinets, power amplifiers in consumer electronics (hi-fi, home cinema sound and car audio) and professional audio and music amplifier products. For the latter, crossovers are used in bass amplifiers, keyboard amplifiers, bass and keyboard speaker enclosures and sound reinforcement system equipment (PA speakers, monitor speakers, subwoofer systems, etc.). Crossovers are used because most individual loudspeaker drivers are incapable of covering the entire audio spectrum from low frequencies to high frequencies with acceptable relative volume and absence of distortion. Most hi-fi speaker systems and sound reinforcement system speaker cabinets use a combination of multiple loudspeaker drivers, each catering to a different frequency band. A standard simple example is in hi-fi and PA system cabinets that contain a woofer for low and mid frequencies and a tweeter for high frequencies. Since a sound signal source, be it recorded music from a CD player or a live band's mix from an audio console has all of the low, mid and high frequencies combined, a crossover circuit is used to split the audio signal into separate frequency bands that can be separately routed to loudspeakers, tweeters or horns optimized for those frequency bands. Active crossovers are distinguished from passive crossovers in that whereas passive crossovers split up an amplified signal coming from one power amplifier so that it can be sent to two or more drivers (e.g., a woofer and a very low frequency subwoofer, or a woofer and a tweeter), an active crossover splits up audio signal prior to amplification, so that it can be sent to two or more power amplifiers, each of which is connected to a separate driver type. Home cinema 5.1 surround sound audio systems use a crossover which separates out the low-frequency signal, so that it can be sent to a subwoofer, and then sends the mid- and high-range frequencies to five speakers which are placed around the listener; in a typical application, the signals sent to the surround speaker cabinets are further split up with a passive crossover into a low/mid-range woofer and a high range tweeter. Active crossovers come in both digital and analog varieties. Digital active crossovers often include additional signal processing, such as limiting, delay, and equalization. Signal crossovers allow the audio signal to be split into bands that are processed separately before they are mixed together again.

[@happyshows07]

This man has vast knowledge. I seen many videos in which he explained everything in depth. ❤️❤️

[@samtdl]

He is passionate about his Subject

[@anilkumar.r.toravi7830]

Active/ passive crossover,,, what an excellent video!! No words are enough to appreciate the most simple yet quite convincing manner of explaining the concept. This indicates how best u can simplify the subject howsoever complex it may be. U r one among the top few u tubers on audio spectrum in india. As my knowledge goes, probably others cannot rival u in knowledge n presentation skills.. Initially, video did not mean much. But as it went on winding, things started impressing in mind so easily n effectively. I read a comment that urs is theoretical one. Can he show anyone in india, who can explain so simply n impressively? May be internet is full of such material. But can he present it on his own without expertise in subject? Simply commenting is non sense. Though it is true that the things be shown practically, but it has its own costs. This hardship should not deter any genius from sharing his knowledge, though theoretically. U need not bother for such absurd, impractical and irrelevant comments. Plz go on producing such videos on audio spectrum.

[@WhatIThink]

Thanks for your understanding

[@lovekush9103]

Audio Range Speakers -- 500 Hz - 20 000Hz Woofers -- 20 Hz - 2,000 Hz Sub Woofers -- 20 Hz -400 Hz Tweeters - 2000 Hz - 20 000 Hz

[@pravindchauhan6792]

Sir i am your old follower but sow u first time . great knowledge for active and passive

[@swarajbiswas3056]

Good knowledge and nicely explained. Please share more. You have explained much technical data. Very very impressed. 👍👍👍👍

[@remixtap8829]

Sir, you have great 👍 knowledge and skills in the field of sound that really need to build quality audio products. Thank you for contributing your work towards us.

[@ramlalit3414]

Awaj sun ke to achha laga aaj chehara dekh aur bhi acha lga acha samjate ho

[@diamond527]

Thank you for sharing better knowledge And please describe it practically 🙏🏻👍

[@rizwanakhan7140]

Bahut achchi jankaari de ab kaam badh gaya 3×2 amplifier banana padega, keep it up.

[@sujitchakraborty2623]

Nice Video! I have some doubts regarding Active Crossover:- 1) If I use this crossover, then can we need separate tone control (bass-treble) circuits ? 2) If i build a tree way stereo speaker system then we need total 6 nos of power amplifies for each frequency & each channel? If yes then also power requirements are also needed huge. 3) In simple words its a band pass circuit i think, and more suitable for 2.1 channel system rather than 2.0 stereo.

[@WhatIThink]

Yes you can use tone control if you want otherwise not required 6 amplifiers are required but mid will be half power of bass and high will be half power of mid. Therefore even with 6 amplifiers very heavy power supply is not required. These circuits are used in stereo as well as 2.1 both. You have to modify circuit as per your requirement.

[@sujitchakraborty2623]

@@WhatIThink Ty.

[@AdiAdi-ho3wi]

Apki video hum Bina dekhe bhi like kar daty hi keyoki AAP video kuch khas perkar ki video bnata hai

[@raziqraziq2816]

Basic knowledge hai sir love you

[@deepakkumarkishan1116]

I am waiting for your passive crossover making video

[@manusudha4269]

I am going to make a 6 amplifier 3 way active crossover stereo.(3speaker in one box x 2 )I am planning to use 100 watts x2 for woofers .I am not able to decide the amplifier wattage for the 2xmid range and 2x tweeters. Kindly suggest. Your early reply is greatly appreciated

[@coolmonkey5269]

sir which crossover model u using

[@Papunanayak]

After watching so many videos of your finally see your face. Hamesa awaz sunta tha ab face dekha achha laga sir

[@WhatIThink]

thanks

[@induvishwakarma8962]

@What I Think to mai ise 2 way crossover network ke sath chlaau ki bina crossover ke tweeter aur woofer ko parlell me karke chalaau best performance ke liye kaun sa options in dono me se best hoga please bataiye please

[@sks-rb3kp]

Thanks for your good informative video. (Sir)

[@dummytest9040]

Yamaha 5.1 Av receiver ke saath crossover lagana chahiye kya . Plz suggested

[@saxophoneshotgun618]

Thank you sir your valuable knowledge .aur aap jis Tarah se ek ek baat kahte ho is tarah Ka Hindi me KZbin par koi nahi bolts . sir meri ek request hai studio monitor pe ek video banaye na Mai ek musician Hu aur muje studio monitor technical knowledge baare me Kuch sikhna hai thank you

[@tmktr7980]

Salute you sir u r explaining theory very nicely any one who has little knowledge in this field can understand well thank you keep doing your good work, all the best .

[@pramodkadpate3904]

Sir, घर के उपयोग के लिए अगर Active crossover ka इस्तेमाल करते है तो क्या coloum में woofer, speaker तथा tweeter को parellel connection में लगाया जाय?

[@IceJackal1984]

Very good video

[@souravgope3196]

Agar school vi apke jaisa koi samjha deta to aaj hum sab kahi aur hote😁

[@WhatIThink]

thanks...

[@sachin_kumar_99]

Salute sir Mai bahut Dino se aapka video dekhta hu .kaphi achhi jankari milti h.thanks for its.mere paas ek1230bahut Purani audio board h Magar uska performance pahle ki tarah nahi hai isme huming bahut jyada aa rahi h kya kare Deepak Kumar Poddar Begusarai Bihar

[@manojkushwah5075]

Kis company ka sabse best rahega crossover sir

[@akshaytoutam3305]

Sir apne passive crossover designing p video bnaye please

[@surajgupta256]

Sir ji bina crossover network ke kya speaker pr load parta hai chalane se

[@shazadiayesha6907]

Namaskar sir Agar active cross over se freaqency separate karke separate amp ko de diya jaye to to sabhi amp ka speaker out put 2 terminals niklenge Dilkkat ye hai ke agar woofer mid range and tweeter ek enclosure box me seprate ho to amplifier se totally 6 wires run karna padega aisa bulky wires agar run kare to compact nahi lagega is issue ke baare me koi suggestions dein

[@shivsoundkanesra3505]

Hi sir.. Me aapka bda fan hu or aapki sbhi video dekhta hu Mere pass RCF 15 inch 400w ka 2 speakers he me usme passive crossover ki jagah dono speakers me 100uf ka ak ak capacitor lga du to usme se bass cut krne ke liye Me speaker live monitor me chlata hu Aesa kru to mere QSC rmx2450 ko koy dikkt aayegi long time chlane ke liye

[@shivsoundkanesra3505]

Muje speaker me 180hz se uprki frequency chahiye esi liye capacitor lgana chahta hu

[@WhatIThink]

Sirf mid ke liye passive crossover alag hota hai. 100 uf ke aas paas lagane se bass kum ho jayega but 100uf ka nonpolar capacitor vo bhi 250volt me lagana padega.

[@shivsoundkanesra3505]

@@WhatIThink thank you so much sir Me aapki video sound valo ke sath share krta hu

[@wasimahmad561]

Sir..... jo tpa3116d2 ic class d ka bord hai usme uske jo potenshio miter ke knobs hai wo bhi kya active crossover hai

[@WhatIThink]

Ek...Tarah se yes..

[@wasimahmad561]

Thank u 😍

[@gajendraganeshe1764]

Sirji 1) Ghar ke liye chhote program ke liye konse class ka amplifier board accha rahega 2) active class over ka board market uleble hai kya pichali video aapne double bt ka bataya wo accha rahega

[@azuldigitalexpress8522]

Example if we have 2.1 amp with 400w Stereo 200w mono to waha bhi ye lagana hoga

[@S2audioamplifier]

Home amplire k liye box. M kon sa lagaye

[@laxmansinghchauhan1118]

Sir kya single amplifier me active cross over use kr sakte hai

[@bantukumar1346]

Agar sir dono activ passeg crosover ek sath pryog kiya jaye to kya hoga plese bataye

[@Naresh76116]

Sir please make a video of active crossover for home use

[@Naresh76116]

Sir ahuja or behriger crossover which is best for home use under 8k₹

[@WhatIThink]

Behringer or dynatech...check the link in description.

[@Naresh76116]

Thank you sir.

[@shridharnikam2035]

Sir, Three way cross over is good or one more branch for subwoofer plus three way plus subwoofer is good...?

[@ramvilasdas5358]

@@Naresh76116 33w

[@surajgupta256]

Sir ji passive crossover box me lagaye ya nhi

[@AmrikSingh-xs7iy]

Hello sir, mere paas 10" 3way (50 w) 8 ohm speaker box hai, Market se kaun sa Active Crossover loo, uska rate aur Kahan se milega, please bataane ka kashtt karey

[@naseem351]

Kya isi se milta julta 5.1 channel home theater bhi aisa hi karta hai?

[@WhatIThink]

I will explain 5.1 shorty.

[@banamailgiri1820]

AV receiver mein sab out Jo hota hai usmein crossover hota hai ya nahin hota

[@dhanalakshmi5033]

Hi, I am from Hyderabad. Luckily it happened to see your detailed explanation about passive &active crossovers, it is very nice. I had one kenwood KRF 5550D. If I want to use other makes of stereo speakers like B&W, Polk which are built in crossover boards do they harm to Amplifier?

[@WhatIThink]

You can use any speaker , just take care of ohms . Your amp should support that ohms

[@landrelatedhafeez8991]

Very very good information

[@FacttechzFan485]

5200 1943 100+100 watts ke liye crossover kese banaye sir please

[@Hujijhgf]

Sir ek baat puchni thi woofer ki jagha sub woofer laga sakte hai kya

[@beatsmyheart4539]

I have two 10W 42 mm (1.5inch) 4 Ohm subwoofer. LVpin838 has an amplifier. So the point to make is that if you add a 20 RMS (200 watt PMPO) watt amplifier to a 10 watt speaker, will it sound good? Or can I play it in a lower voice? Please guide

[@WhatIThink]

You can use it.

[@beatsmyheart4539]

@@WhatIThink Sorry 20W and (200W PMPO) × 3. What is PMPO?

[@analoghardwaretops3976]

@@beatsmyheart4539 Go with 20 W RMS.. never ..pmpo..it is a way of cheating on the equipment ratings by just showing a bigger number... BUT NOT THE SAME (correct) VALUE...

[@BonniGyanesh]

Sir please readymade 3 way Active Crossover kharid neh keh koi website ya link digiyeh kyuki humarey yaha nahi milta hai aur ek baat batayen ki kya ek Active Crossover Amplifier meh laganeh seh kya dono stereo box keh liye alag alag lagana padega ya sirf ek seh kaam chal jayega

[@WhatIThink]

Readymade milta hai but costly hai. NX audio ka le lijiy. Active crossover stereo hi hota hai

[@BonniGyanesh]

Thanks sir kya NX Audio ka online milta hai aur kya yeh 3 way meh kaam karega kyuki mei lm3886 stereo board aur tda7294 mono board seh ek 2.1 Amplifier banwa raha hu kya is Amplifier meh yeh board lagwa sakteh hai aacha sound quality keh liye

[@TechnicalBD1971]

Thank u

[@sultanmahabub7466]

Please upload passive crossover making video

[@nageshmane4444]

HF ke liye Active crossover lagna ke bad Passive crossover lagane ki jarurt he kay sir pliz help

[@WhatIThink]

No

[@nageshmane4444]

Thanks sir

[@PrinceSharma-kl2mb]

Sir active aur passive network ek sath chala sakte h

[@DeepakBishtOfficial]

Sir kya hum bass trebble board aur subwoofer ke beech me passive crossover jod sakt3 hai Pl rwply

[@mme_kartiksir]

No

[@jitendrasharma6275]

Very nice video

[@assamsyoutube6319]

Sir app amplifier kabtak desine karangy ????

[@imtiazhossain6626]

Very useful info 👍👍👍 thnx

[@WhatIThink]

Welcome 😊

[@kumarsanjeev3766]

Ahuja 4040 mein kaun sa tutor Hamen istemal karna chahie crossing over

[@amardeepsingh9917]

Sir agar pesive crossover top me laga hai to kya ham active crossover use kar sakte hai, or active crossover lagane ke baad kya hame amplifier bhi alag alag chahiye ya ek hi amplifier se chal jayega mere paas CA 20 hai bass 1000 watt ke 2 hai matlab 2000 watt, sir contact kaise kiya jaye aapse please koi number ya instagram ya kuch or ho to please bataye🙏🙏🙏

[@harshsharma-tj2lg]

Sir Can you make a 3 way crossover for me.

[@Bpro8621]

We definitely change our professional way of amplifier use.

[@rajks6981]

Excellent video! Wonderful job👍👍

[@basudevjana3]

Passive crossover ka kuch diagram bata dijiye

[@chandanhajra3303]

Sir Mere pass 5200 and 1943 ka amplifier hain isme kitna ohm ka speaker cholega.

[@WhatIThink]

power supply aur Transistor Pair par depend karta hai.

[@rockydsouza5689]

Boss i like very crisp powerful sweet treble . So i want to install 4 tweeter in my tower speakers so please give me diagram of connection

[@RakeshChoudhary-wq8ee]

Super duper

[@induvishwakarma8962]

Mere pass 3055 transistor amplifier board hai to mujhe kaun se value ka tweeter,woofer aur kaun se value ka crossover network lagana padega best performance ke liye please bataiye please

[@WhatIThink]

100 watt 8 to 12 inch wooder in 4 ohms and any size/ohm tweeter of 100 watts.

[@atssoundcg-106]

Sir ji dbx DriveRack 260 ka videos banao na please

[@lalittechnicalexperiment]

Nice Knowledge ❤❤

[@WhatIThink]

Thanks

[@SSAHir-so8tp]

Nice sir

[@ahsankapdia5188]

Mein ek speaker design ker raha hun ek baat poochni thi mere pass 3 amplifier or 3 preamp crossover hein ek set mein high ke leye or ek mid ke leye or ek low le leye use kerna chahta hun lekin ek masla hai ke ek bluetooth board ager mein 3 preamp ke sath lagata hun tu power bhot kam ho jae ga is ka koi solution bata de

[@akkigamingaj359]

Cross over Sound testing video practical banavat sir please

[@avtarsinghbobby9395]

V gud sir ur realy genius

[@RandomTopicsAZ]

Sir, I wanna buy this 3way cross-over board, please help

[@ashwanisingh897]

Sir aap amplifier bahnatey hai

[@ranjeetkumarjhajha3933]

2 no lagaye to kiya hoga sair

[@chandanhajra3303]

Sir equlizer or active crossover keya ak hi hain . Ak hi kam korta hain

[@WhatIThink]

working ek hi tarah ki hia

[@subratabhowal7590]

Dear Sir, let the amature as well as new enthusiastics be benefited with your in depth knowledge and kind hearted aptitudes, having the correct informations of availability of suitable ACTIVE CROSSOVER CIRCUITS in Indian markets specially in DELHI as well as KOLKATA Electronicks Markets from you itself.

[@WhatIThink]

Thanks for your appreciation.... In Indian market you have options available only in professional audio in respect of active crossover.... Choose any thing cheaper as all are made in China and perform reasonably good. For better options choose branded like behringer, dbx Or studiomaster etc.

[@subratabhowal7590]

@@WhatIThink As being hobbyist, I need more specific informations regarding Active filter circuit boards that would be suitable and popular 600W amplifier projects etc. as It is given in the case of passive filter circuit, mono or double by yourself or Mr. Alok Mukherjee and others many. Thanks for prompt response.

[@dilipkumarpanchal9560]

Thanks sir Aapka video Dekha kar bohot bohot Acha laga good morning have a nice day

[@induvishwakarma8962]

Mera jo Bluetooth panel use jab mai on kar rha hu to usme regularly Hi likha hua a rha hai bus aur kuch bhi nhi ho rha hai Hi likha hua a rha hai please bataiye kya problem hai esme please bataiye please

[@wasimahmad561]

Sir... Mere pass tda7293 ic ka amplifier bord hai mujhe usse subwoofer run krna hai to.......jo tda2030 ic ka home theatre ka bord hota usme jo woofer wali ic me jo audio input hai agr wo audio input mere tda7293 ke bord me du to kya mera subwoofer sahi se kaam karega.. Reply jarur krna..

[@WhatIThink]

Yes...

[@wasimahmad561]

Isse mere 7293 ke bord pr koi bad effect to nhi padega

[@kumarmahesh748]

I am a science teacher and have very much interest in amplifiers. He explains everything scientifically

[@mayuragravat9418]

sir ye jo aap theory se sikha rahe ho wo aapne aap me bahot badi baat hai.thanks

[@WhatIThink]

Thanks sir...Lekin kya kare logo ko theory jyada acchi nahi lagti.

[@computerbaba8837]

Very good knowledgeable video for audio Love r😅😅😅😅😅

[@MUSiC_creation2583]

Aapka Tallent Kitna hai sayed aapvi nahi janta hai sarji❤️❤️❤️❤️

[@sambitkumar3016]

Thank you very much for explaining in a professional way, great. Need a help, I am using Sony sa-d40 woofer and it is not accustic at all. Very heavy bass it is producing not possible to listen in home. Will you please help. Please

[@iamlegend4857]

सर जी, बहुत अच्छे और बहुत विस्तृत वीडियो के लिए धन्यवाद। आप यह बताना भूल जाते हैं कि आपके कान को सुनने के लिए कौन सा नेटवर्क मीठा है। महोदय अगर मैं सक्रिय नेटवर्क पर जाता हूं तो मुझे तीन एम्पलीफायर खरीदना पड़ता है और यह बहुत महंगा है। उदाहरण के लिए मेरे पास यामाहा xp5000 एम्पलीफायर है। मैं पिछले ढाई से उसके साथ मिलान करने वाला स्पीकर बनाने की कोशिश कर रहा हूं लेकिन मुझे कोई सफलता नहीं मिली है। कोई कहता है कि इसकी कीमत साठ हजार से अस्सी हजार है। मुझे लगता है कि मुझे इस एम्पलीफायर को स्क्रैप करना होगा।

[@WhatIThink]

Aapka amplifier professional amp hai. P audio ka speaker aur professional network use karna padega. P audio ki site par enclosure ka design bhi diya hai

[@syedfaizmohammadashrafi871]

Sir.Mere pas Ahuja k 15" 500w k single single wale(monitor type) k 8 speakers he. Sab me 80w ki ajuha ki hf he, or Dynatech V5000 k 2 power amp he,or yamaha 16xu micer he,to Muje konsa crossover lagana chaiye???? Kya behringer Mx882 laga sakte he?? Yaa fir aapke hisab se konsa lagana chahiye.plz reply....Q k mere spekr 2 bar ud gae,🙏🏻plz reply

[@WhatIThink]

Use active crossover

[@syedfaizmohammadashrafi871]

Mx882 behrigr laga sakta hu kya sir??? Ya koi name bataiyena sir active crossover ka plz

[@bgelectronicswork3869]

Nice

[@Rocking2571]

Can we use sub woofer in the place of woofer in passive crossover

[@ravinderrajput1621]

सर जी 3 way क्रॉसओवर मैं हम वूफर को हटाकर उतने ही वाट का जितने वाट का वूफर है उतने वोट का सबवूफर लगा सकते हैं बताएं

[@rajindaipur88]

Bahut achchha btaya sir aap ne hum aap see watshap par judna chahte hai please no bta dijiye

[@prosenjitdutta9596]

Sir need some details on full range speakers avilable in indian market. Please make a video on speakers avialable in indian market ranging from 3 watts to 100 watts so that we can choose as per our projects need.

[@shekharbellam]

Very knowledgeable person…. Very very good teaching🙏👌🙏👌

[@moddykhan3748]

Sr 3055 or 4440 bord ke liye konsa crossover Acha hai passive/ya active crossover

[@lovekush9103]

Use 2.1 broad

[@mithunhazra]

One doubt sir. If I have an 5.1 or 7.2 channel av receiver, then maximum time we use 2 way or 3 way passive crossover for every speaker unit. Like center channel front left and right channel Surround left and right channel and also atmos. Then how can I use a active crossover in this situation. Can you please explain this?

[@latelatest6061]

Hello sir crossover is not a channel it is only frequency divider.your sorrund system has already inbuilted all of this.

[@jdelectricalswork6841]

Sir ji amplifier specification ka full details vedio bana dijiye

[@pankajlalchandani2364]

Sir active crossover or dsp ek hi cheez hoti hai?

[@surendrajadhav9330]

अगर हम एक्टिव और पैसिव दोनोंही use करे तो?

[@kumeshram6254]

Silicon chip circuit design not available in the link ,sir can you provide other link or pdf of circuit

[@pateljipatel4856]

For home suggest 20/watt active amplifier. 🎉

[@km-qw2qi]

Great Explanation....No words....Thanks for the Knowledge Share Pl keep Doing such informative videos

[@SudeepMaurya304]

Very informative video thanks sir

[@palabinash]

So we have to buy 3 crossovers & 3 amplifiers for the whole setup?

[@WhatIThink]

Yes