Crown Vic Fix: New LEDs and Turn Signals

[@PanzerPlatform]

Right on Connor, This was awesome. I always get a kick out of seeing you guys install these giveaway items. Thanks for the shout out. I hope you like the bulbs, BTW they have a two year warranty, so if they fail just send them an email with a photo of the defective bulb and they should send out a new one. -Chuck

[@iliketowncars]

Great work, that turn signal mod is very popular. Lots of General Motors cars wired up their side lamps like that from the factory.

[@PanzerPlatform]

Yo.

[@iannathanson6014]

My grand marquis side light doesnt flash it just shines towards the corner brightning it up.

[@free2chasehappy]

Hey Connor! Came from Panzer Platform's channel! Nice installation vid! Looking forward to more videos man!

[@connorkeefe]

Thanks for stopping by! I'll be posting a new video soon so stay tuned

[@MrRockydee07]

Good work , I think I'll slice into each sides turn single wires than run new wires and add another socket with amber led bulbs so both flash at sane time .

[@Plekteret04]

I also installed Led for my headligt in my crown vic, and some ledlight in the bumperhole. Its fine in the dark winteroad here in Norway. There will be some noise from the cooling fan, the other led lights(H1) has cooling ribbon ''tale''. Its a big different when using Led light. These has been working for many years

[@connorkeefe]

I'll agree on that, the difference is super noticeable and I definitely can't go back to standard lights. Super cool to hear you've got a Crown Vic up in Norway too!

[@Plekteret04]

@@connorkeefe My friend and I did import two 2004 Ford Crown Victoria LX in 2006, Maroon and Arizona Beige(color). Very happy with these car. Crown Vic are the best car ever made, will last for a long time.

[@wadepatton2433]

perfect timing. I have new housings and LED's in the mail. I'll do the flash mod too--hey but the alternating flash was best.

[@jonopwns]

With this mod, the turn signal will flash with the side marker at the same time when parking lights are off. When parking lights are on, they will flash alternating.

[@connorkeefe]

Just tested this out a few minutes ago and it looks like that's exactly the case! Wish I could get them to stay consistent but that'll be a project for another day

[@oOgy172]

​@@connorkeefe Did you get to fixing the turn signal and side marker flashing alternatively?

[@NorthCoastT]

New subscriber here from Panzer Platform! Great video and congrats on winning the giveaway.

[@Benny-yy7on]

What housings are those? Been thru 3 different sets of leds, beam pattern shoots everywhere. Been looking to find a nice line. Currently have aftermarket oe style housings.

[@connorkeefe]

I got these ones from Razor Motor off eBay: www.ebay.com/itm/273503024149 The pattern is pretty solid, but it's hard to beat oem

[@max2169]

Looking good!

[@cartierchronicles2000]

I actually have some extra ground wire very cool makes me want to try it out on my towncar and make a video.

[@08_crown_vic]

Where do you have LED turn signals in this video?

[@connorkeefe]

I think I accidentally cut it out of the video, but @4:46 I spliced my low beam wire and connected the cornering bulb’s negative wire to that. That's what makes the cornering bulbs blink when the signal is used. (My low beam wire was green and white, but I've heard it can be brown too.)

[@azizshavershian2065]

hey man what model lights are those 2 behind your grill?

[@papo862]

cool, my corner turn lights never worked ,so which wire had to be spliced both positive and negative?

[@connorkeefe]

I took the cornering light's negative wire and spliced it into the low beam wire on the headlight (mine was green and white)

[@papo862]

@@connorkeefe thanks for the reply , i appreciate it

[@OfficerRIQUET]

I would like to do the same, how did you make it flash together?

[@connorkeefe]

You have to splice your low beam wire and connect the cornering bulb’s negative wire to it. The colors might be a bit different, but my low beam wire was green and white

[@Tier1Norseman]

So when the parking/headlights are on, they still illuminate until you go to turn and after which, they flash for the turn signal indicators? If so awesome. I never likes how so many vehicles don't have some marker turn signals to make turning safer etc.

[@connorkeefe]

The amber lights do exactly that. It looks like I forgot to add that to the video, but you can get a preview of them in the thumbnail

[@Arkansas223]

Did you run the ground to the turn signal to the other light to make it blink ?

[@Arkansas223]

Or did you run the power wire from the turn signal wire to the other wire

[@PrimordialChaos1]

Where did you find the push bar?

[@connorkeefe]

The bar was already installed when I bought the car, but the brand is Go Rhino. I think I've seen full kits for installing them on eBay before as well

[@PrimordialChaos1]

@@connorkeefe good deal, I'll check it out. I appreciate that, and good content 💪🏾

[@cartierchronicles2000]

Nice!!!

[@SasukeGarage55]

Do you have a link to the led bulbs?

[@connorkeefe]

The ones that I got are no longer available, but there's an almost identical pair on Amazon called Poison Scorpion 9007 LED Bulbs. Those should fit the same way in any newer vic

[@SasukeGarage55]

@@connorkeefe Mint,Thank you for the information

[@WJHandyDad]

good job

[@SGAOuTLaWz]

Subscribed. What was the brand of LED headlights you installed and where were they purchased? I know you got them on a giveaway- do you know where Panzer platform got them?

[@connorkeefe]

The brand was 4WDKING, but it looks like these specific lights have been taken off the site. I did manage to find a very similar clone of these on Amazon though, and they're called POISON SCORPION 9007 LED Bulbs. Looks like they'll fit 98-2011 Crown Vics too

[@SGAOuTLaWz]

@@connorkeefe thanks brother. I just ordered the NiLights brand LED Panzer platform reviews 6 months ago.

[@bigswervo434]

@@SGAOuTLaWzhave a link?

[@j.t.cooper2963]

It would have been nice if you didn't edit out the splice on the side marker light at 4:46. I want to see where you spliced the wire on the side marker light. Everybody has a video where they show the splice at the turn signal bulb, but not the splice on the side marker light. 🤬 Geez man, really???

[@connorkeefe]

I think I just forgot to film that part, but what you have to do is splice your low beam wire and connect the cornering bulb’s negative wire to that. My low beam wire was green and white, but I've heard it can be brown too

[@christina.sherman]

car go burrrrt

[@kevinhitchcock7062]

I was going to put LED headlights but the are illegal according to Federal DOT standards. Can only be used off road. I would put them in my Grand Marquis but NY cops are asses and would ticket me as soon as they see them.

[@damiangomez3537]

Amateur hour bud use heat shrink connectors or heat shrink and connectors not scotch locks there as bad as wire nuts 😂

[@inthefleshpayyourrespect8020]

What’s the details for the bulbs so I can buy me some????

[@connorkeefe]

The bulbs were from 4WDKING, but it looks like they're discontinued now. If you're looking for some like these, make sure they're 9007/HB5 LEDs (should fit 98-11 Vics)

[@inthefleshpayyourrespect8020]

@@connorkeefe ok and what about the turn signals? And would I need some for the back

[@connorkeefe]

I left all the other bulbs as stock. Changing out those ones for LEDs can cause hyperflash if you don't have relays, and I don't really know enough about wiring to use them