CrowVision 11.6 Inch Touchscreen for Single Board Computers - Perfect for Radioberry HF Transceiver

[@SeedyKidd]

VNA + VNA software on the pi Could print an enclosure/case with a spot for the calibration parts, adapters and a small battery

[@boomstickaficionados]

I got mine running. It's definitely not the easiest project, but it is extremely satisfying to tinker with.

[@N4GW]

Thanks. This has got me thinking

[@DBruno]

Looks like a potential option for a Hermes-Lite 2 all in one.

[@TechMindsOfficial]

Yep! Exactly. Pihpsdr supports HL2 perfectly.

[@ScatManAust]

Was thinking the exact same thought. Also was thinking of a bigger screen for my sBitx V2 from HF Signals.

[@RiveraYoshibawastaken]

Wouldn't be surprised if the Hermes turns into a cheaper HackRF

[@pjaro77]

@@TechMindsOfficial And did you try Nooelec NESDR SMArt v5 SDR ?

[@digitalchaos1980]

That display looks great!

[@mikesmith-po8nd]

The antenna adapter looks to be close to the circuit board. You may want to use a different adapter or maybe some insulation, especially if you're not going to put it in an enclosure.

[@bloguetronica]

This is a great idea! That with a Raspberry Pi, a Radioberry and an amplifier board will make a fully capable QRP radio with panadapter, built-in digital modes capability, and a computer to boot (no pun intended). The resolution is a bit above SD HD, with is GREAT. However, 1366x768 is a bit unusual.

[@Lopastudio]

Pretty interesting device.

[@LeeMcc_KI5YPR]

That looks interesting. I might get one.

[@babass521]

Good morning, I have a RadioBerry card but apparently the HF output power is too low to drive a power amp... How can I increase this RF output since the Preamp card is no longer manufactured!! Is there a good solution to increase this output in order to drive a power amp?? 73

[@h4rry815]

Hi Matt!, I love your videos and have been an avid watcher and fan for over 3 and a half years now!, Any chance of an updated setup tour? Its been a while and you have evidently accumulated more (And new) gear (Handhelds, Antennas ETC) - Any chance of this?

[@TechMindsOfficial]

Soon :)

[@TechMindsOfficial]

Soon :)

[@h4rry815]

@@TechMindsOfficial Amazing thank you!

[@TheElectronicDilettante]

Great video, as always. My question is a little off topic but has to do with HackRf so I thought I’d ask it here anyway. After watching all of Michael O.’s videos on the HackRf , I learned that the frequency range can be pushed up to 7ghz from the command line tools. I was curious if you or anyone has tried this and if so , how was the performance.? Thanks for all the informative videos. Oh, did you finish the power amp build or was it shelved. I’ll have to go back and look. The amount of power you were going to have at the ready would be perfect for a few projects i have in the works. Thanks again

[@1942Grampz]

Hi Techminds, how did you re--size the screen to 11 ins, mine is 10 ins and I don't know how to make it to fit the full screen. The radioberry is a lot smaller than this screen? is the adjustment via the software? thank you Owen

[@TechMindsOfficial]

I modified the install script, you can take a look at mine here: github.com/TechMindsYT/pihpsdrmods

[@Un_Pour_Tous]

How does that sdr berry work? is it python based?

[@toddlittles2786]

what the name of that sdr software your using in the video?

[@TechMindsOfficial]

Pihpsdr

[@patrickdemeyer4668]

Throw as much tech as you want to the original hobby , talking to each other. I will not renew my license , FT8 , RTTY and so on , what is this , weekends is only " CQ CQ contest" , its turned in to a pile of S.

[@RiveraYoshibawastaken]

Bro, even after getting a Spanish to English dictionary I can't understand you 💀