Crush Your Troubles: Troubleshoot your BattleBots from Hexbug

In this video, we'll show you how to troubleshoot your BattleBots toys when they're not working as they should. From identifying common problems to step-by-step instructions on how to fix them, we've got you covered. Whether it's the pairing or a glitchy controller, you'll learn how to diagnose the issue and get your BattleBots back in the arena in no time. Don't let a malfunctioning toy keep you from enjoying the thrill of the battle - watch this video and crush your troubleshooting troubles!
Bonus tip: Sometimes I notice that the bot will be stuck on a particular channel. In those cases, even pairing it in another room doesn't resolve the issue. I've found that if you turn them both off, then change channels and re-pair, it works just fine.
Chapters:
0:00 Is my battlebot on or off?
0:33 How to fix battlebot not responding
1:26 How can I tell if the battlebot is on or off? (older bots)
2:03 Do the weapons on the battlebot hurt?
3:10 How do I pair a Hexbug battlebot to a controller?
5:30 How to fix a battlebot that won't turn on
7:05 How to fix Duck battlebot not moving straight
9:02 Fixing Hexbug Battlebot controller not pairing to battlebot
13:26 Battlebot stops working after a few rounds
#battlebots #technology #hexbugbattlebots

[@user-ek5rf8fx2g]

Hi, My Tombstone battlebot stops working after it hits something. How would I be able to fix this problem?

[@LetMeFixIT]

So it still moves? If it doesn't move check batteries...try new ones cos sometimes it takes more power to run. Also check that your bot is not upside down.

[@101rotarypower]

Does anyone know, will the Hexbug BB controllers take Full 1S voltage at 4.2Vdc? Is it possible to run a small USB charging BMS board and 3D print a extended lower controller case?

[@olo101olo]

Have you had any issues with Channel 2 & 4 controlling the same bot?

[@LetMeFixIT]

I did but I wasn't sure which channel. It's because I paired the same bot with a different controller. I label them now so it's easier to recognise. If you find that you are controlling the same bot, do a resync. Pretty much take your bot and controller to another room and pair them again.

[@Terrortopsfan1]

I need an answer to this question why do my hex bug bots turn themselves off and my rotator hits the wall when the weapon is on and it doesn’t move then it turns off like how do I fix this

[@LetMeFixIT]

Maybe the battery has come loose after it hit the wall? Also you can check to make sure it's not upside down. I've found that if a bot is upside down, it doesn't receive well.

[@Terrortopsfan1]

@@LetMeFixIT I made the battery cover tight so it can’t be loose and it’s not upside down like it’s fine when it’s not spinning but when it is spinning I will click forward or any button on the controller except for the weapon and It will go but won’t stop till it hits the wall then won’t move until you get the weapon off the wall or it will just turn off

[@ginahill837]

my minotaur's weapon won't spin, even after changing the battery's. what do I do?

[@LetMeFixIT]

I don't have a minotaur but when you try to spin it, do you hear the motor's sound whirling? If so, maybe the piece that's attached to the weapon is loose or broken.

[@jasonmackjr9866]

my hypershock doesn’t turj on what should i do

[@liammartinez5690]

@@LetMeFixITpls do a tear down on biteforcw I beg u

[@Afcrowell]

Our Tombstone weapon won't turn off once it's activated. It also won't move after the weapon is activated. Any ideas?

[@willpratt8608]

Same

[@Afcrowell]

@@willpratt8608 Ours was actually an easy fix, I think. We just replaced 1 battery in Tombstone and that seemed to do it. My guess once the weapon was triggered it didn't have power enough to run the weapon and receive a signal.

[@LetMeFixIT]

@@Afcrowell Sometimes a low battery can cause devices to do wierd stuff like turn on or randomly do things.