Tap to unmute

Crusty 4.8 prep for new edge

  Рет қаралды 6,658

Sloppy Mechanics

Sloppy Mechanics

Күн бұрын

Пікірлер: 44
@Calvin-Nelson
@Calvin-Nelson 5 ай бұрын
Good to see the old Mustang getting some love. Hard to believe that it was 3 years ago that Dad and I put our greasy hands on it.
@erickbernard8208
@erickbernard8208 5 ай бұрын
@Calvin-Nelson u too message Richard
@AaronHardinPhoto
@AaronHardinPhoto 5 ай бұрын
I've seen you do this a dozen times and I'll watch a dozen more. Those damn videos taught me how to do this mess and my turbo crusty boi c10 has been my daily for damn near two and half years. Crusty Bois for life.
@hydrocarbon82
@hydrocarbon82 5 ай бұрын
Another tip for doing springs with the heads on: the horror fraught extended-bent needle nose pliers with a rubber band on the handle will hold the valve stems thru each port quite well. It's a good safey net.
@Noblestreetcars
@Noblestreetcars 5 ай бұрын
For those without an air compressor, bring the piston to the bottom and shove some nylon rope in the spark plug hole. Rotate crank til it stops then the valves can't fall in at all. Works mint
@littlelifters7543
@littlelifters7543 5 ай бұрын
i borrowed a spring compressor of a mechanic mate of mine to swap the springs while the heads were off. i returned it about 40 mins later and he asked if i would need it again when i got the heads back. He actually looked shocked when i said i didn’t even take the valves out. Silly rabbit.
@andymcdo
@andymcdo 5 ай бұрын
Nice to see ya back at it again some more
@Burndown
@Burndown 5 ай бұрын
The POV dead blow hitting valves made me laugh. I understand why you’re doing it but the angle was entertaining. A hammer can fix anything!
@sled1racer
@sled1racer 5 ай бұрын
Nice to see these vids again
@brianmaton
@brianmaton 5 ай бұрын
Something about a crusty junkyard LS just hits different
@Sleeperdude
@Sleeperdude 5 ай бұрын
Nice advice
@Jonny_trans
@Jonny_trans 5 ай бұрын
I’ve always used a socket and a hammer to get the retainers off. Then going back together I use that tool. (Amazon $30) I have those same springs on my 6L I’ve buzzed it to 7300 so far. Nothing seems mad I also bought a Gen3 billet valley cover because it was $50 it came the next day, it was the only way I could get a valley gasket next day.
@BoWhiteRacing
@BoWhiteRacing 5 ай бұрын
Yes sir. The master class has begun.
@markwise9868
@markwise9868 5 ай бұрын
He's alive!😂
@scrapmetal_sleepers
@scrapmetal_sleepers 5 ай бұрын
I love loading the intake ports with damp paper towels and launching them across the shop like big ass spit balls
@_the_Chad_
@_the_Chad_ 5 ай бұрын
I am much excite
@p9raceway759
@p9raceway759 5 ай бұрын
I hope the Hand is available for future appearances
@SloppyMechanics
@SloppyMechanics 5 ай бұрын
i tried to put hand on hammer but was running out of time for shenanigannnshgs and had to maximize real work vs autistic throught streaming
@wobblysauce
@wobblysauce 5 ай бұрын
Hitting things with a dead blow also makes you feel good.
@Levibetz
@Levibetz 5 ай бұрын
The valve thing is so funny. People worry way too much about that shit. If an exhaust valve had sealing issues, it'd already be burnt up. Did my sloppy subaru like that. 150-200k mile EJ25 heads hissing away, lil tap and they're mint.
@HolyCatsGarage
@HolyCatsGarage 5 ай бұрын
Thanks for the hammer tip!
@Odd_Redneck
@Odd_Redneck 5 ай бұрын
Sounding like vgg comes with age 😂
@ClaytonTNelson
@ClaytonTNelson 5 ай бұрын
I may have missed something.. what happened to the 5.3 stroker motor?
@floridamanHooning
@floridamanHooning 5 ай бұрын
LOL I did my valve springs by praying the valve wouldn't fall
@peterreed2685
@peterreed2685 5 ай бұрын
Love the old school content. Go back to your roots!!
@RDub79
@RDub79 5 ай бұрын
@1:53 Giggity
@beecj0
@beecj0 5 ай бұрын
She gonna tip!
@beecj0
@beecj0 5 ай бұрын
Sorry, forgot where I was. Be using the tippy boi.
@EdP-j1t
@EdP-j1t 5 ай бұрын
Mott loves him some DERIK,, just put him on the podcast already, ShhhEEeeesh
@erickbernard8208
@erickbernard8208 5 ай бұрын
Idk if u know but Richard Holdner finally made wrong cam shirts, message him
@joshherion4175
@joshherion4175 5 ай бұрын
Is the promod in the new shop
@1faschicken
@1faschicken 5 ай бұрын
What about the lifters? I know you gotta remove the heads but is it worth droppin in a new set??
@collinfisher3855
@collinfisher3855 5 ай бұрын
Can we see videos longer then 5 minutes I miss your old videos working on the Cars
@TallGarage
@TallGarage 5 ай бұрын
what happened to the fancy engine ?
@SloppyMechanics
@SloppyMechanics 5 ай бұрын
Trash can
@Carbonneutraldrop
@Carbonneutraldrop 5 ай бұрын
Derrick catching shrapmel…
@jamesgeorge4874
@jamesgeorge4874 5 ай бұрын
A dab of transmission assembly lube is extra stick 'n sticky for the valve locks. Be happy it's not FA Subaru, Pentastar, or other dohc guy with 5mm stems, all crammed in a place you can't even get your fingers.....
@Turbogto_guy
@Turbogto_guy 5 ай бұрын
This method is risky. I prefer to bring each piston to TDC. Valve cannot fall then. I’ve done it that way at least a dozen or more times.
@BlaserBuilds
@BlaserBuilds 5 ай бұрын
Ayoo
@davidpartridge4980
@davidpartridge4980 5 ай бұрын
Cezar will make 12-1400 tire with this combo so no other results will be accepted by us idiots 😂
@SloppyMechanics
@SloppyMechanics 5 ай бұрын
you know i have dreamed about sending him my tune file to open and change one number, save and send back and i will be able to re flash another 800whp in but those dreams never became memes.
@ssj4bulma537
@ssj4bulma537 5 ай бұрын
Could you please respond to my comment in your other video about me realizing I’m banned from sloppy mechanics on Facebook? I never did commented at all. Idk why I’m banned. I’ve loved sloppy mechanics for the last like 5 years. Honestly heartbreaking I can’t access the valuable info I’ve been preaching for years
@jminnick5878
@jminnick5878 5 ай бұрын
.
Accused of not doing a valve job😤
18:49
Powell Machine Inc
Рет қаралды 1,2 МЛН
Quest for a 500HP SBC on a Budget (The Block)
12:52
CUTTER'S PERFORMANCE
Рет қаралды 38 М.
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
fairmont rewire before dyno
5:51
Sloppy Mechanics
Рет қаралды 4,4 М.
Trailmater Gets Another Engine
18:35
Trailmater Offroad Recovery
Рет қаралды 147 М.
Pittsburgh 1.5 Ton Low Profile Jack - Repair Stuck Piston
15:18
When you give an 8-liter V10 a big lumpy cam 📈
16:45
Four Eyes
Рет қаралды 2,4 МЛН
Amateur cost effective wiring tools I use and recommend
10:08
Sloppy Mechanics
Рет қаралды 4,8 М.
Instant Justice! (Dealership Ripped off Customer) Never Serviced!
36:35
Rainman Ray's Repairs
Рет қаралды 1,9 МЛН
f7 ly6 turbo - Dyno shakedowns pumpgas
7:43
Sloppy Mechanics
Рет қаралды 7 М.
Mercedes AMG Engine Nightmare: Incorrect Repair Causes Disaster
20:06
Dave's Auto Center
Рет қаралды 1,3 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН