Crux Toyota Wiring Harness Adapter Unboxing | SWRTY-61N

[@ProvoBeastAudio]

Harness linked in the description of the video!

[@spartan706nt9]

Glad I found this video. was about to take my wife’s vehicle to the stereo shop to get her kenwood installed because we opened it up and there was much more factory harnesses then what came with the stuff I bought from sonic electronics. They did not advertise any extra wiring that I would need for her rav4 other then the basic wires. This saved me a ton of money. Thank you.

[@sultan26706]

Hi 3:49 I install in 28 put the other side not have connecte ?

[@arandoesstuff]

I got a Crux Harness for my 4Runner and it worked great. But when I bought this exact one for my 2015 RAV4 everything works except for the hang up and pick up buttons… is there a way to fix it or is my module messed up?

[@johnjoss93]

I have a 2012 Non JBL system and using this harness to connect to an Atoto S8 head unit. The Atoto has the 3.5 mm jack for SWC but also a +SWC (orange/black) and -SWC(brown/black). Where within this harness do they connect to?

[@iamSYKOstudios]

I can't figure this out either

[@timfrancis6774]

Thank you, don't like the Access in truck, wanted to upgrade

[@mitchellandjacksonAndKate]

did you conect the antenna power in the ten pin concector?

[@mitchellandjacksonAndKate]

or just to the radio

[@nateuncharted5690]

I had used this to install an aftermarket radio in a 2014 Toyota Venza, everything works except the reverse cam. Is there anything in specific that needs to be done for the reverse cam to work with this interface?

[@joseescamilla9134]

Any luck getting the reverse camera to work? Having the same issue

[@nateuncharted5690]

@@joseescamilla9134 Unfortunately no. I bought an aftermarket reverse cam (from amazon or walmart) hooked up to the aftermarket radio, leaving out the stock one.

[@yellowsubie28]

Would this work for 2015 scion iq

[@christophervargas5971]

I used this on my 2016 tundra non jbl but i get no front or rear speakers

[@supradaveddd]

I had the same problem and realize that I did not have the amp wire connected which is blue and white. I initially thought I needed this if I wanted to run an aftermarket amp remote wire however, I needed this to have my door speakers and my rear speakers work.

[@Timbuck4]

Where you located ?

[@ProvoBeastAudio]

Utah!

[@Elboricua316]

Good afternoon I have a 2015 RAV4 with JBL system what Harnees i needs.