Thank you very much. Its very difficult to find videos on this topic.
@Sessizgemi85201111 ай бұрын
Best explanation i have ever watched. Thank you.
@G75520892 ай бұрын
A good teacher....covered the basics of stereographic projection and pole figures nicely...
@patrickcurran55363 жыл бұрын
you are a hero, just started a PhD on crystal plasticity modelling and this has really help me understand thing
@NotRealEngineering3 жыл бұрын
Glad it helped.
@omg_komondoos2 жыл бұрын
what you have just done for me in this 6 videos series, my professors failed o do in w whole semester. thank you so man man you're the best.
@alexlong51514 ай бұрын
thank you so much! the best and most understandable explanation I have ever seen on this topic! respect from China!
@李韬3 ай бұрын
我最近也在研究晶体塑性,我们能不能一起交流
@amitanand44083 жыл бұрын
Thank you. very lucid and compact explanation. please upload more videos of crystal plasticity
@NotRealEngineering3 жыл бұрын
will try
@jaekwangkim57153 жыл бұрын
Thanks for nice presentation. This is the most clear source for who just begins studying crystal plasticity area.
@NotRealEngineering3 жыл бұрын
You're very welcome!
@liboyan70103 жыл бұрын
@@NotRealEngineering Sir, can we have a video about RVE Crystal Plasticity in Abaqus (2D/3D)?Thank you very much in advance!
@youngroklee43712 жыл бұрын
Superb video. Thank you so much.
@khushboojagtap60405 ай бұрын
It is really hard to find the video on CP. Thank you for such a simple and clear explanation.
@NotRealEngineering4 ай бұрын
You are welcome!
@李韬3 ай бұрын
我最近也在研究晶体塑性,我们能不能一起交流
@looloolalaable3 жыл бұрын
Another great video. Thank you very much. It's wonderful somebody on YT is creating quality content on plasticity. Say, can you do a video on how to model graphene nanotubes and nanosheets in ABAQUS?
@NotRealEngineering3 жыл бұрын
Great suggestion! Thank you
@looloolalaable3 жыл бұрын
@@NotRealEngineering Thank you for the reply. Looking forward to watching your video on GNTs.
@davidgamboa75223 жыл бұрын
Your videos agre great! I'm excited to see the tutorial of how to use MTex! Thank you!
@move4ward2292 жыл бұрын
thank you very much for the great explanation, i have watched all the videos , could you please upload video explaining how to determine the DRX grains using GOS and the KAM value how to calculate it in addition to the texture explanation
@salimkhoso79953 жыл бұрын
That is very informative video. Very well presented.
@NotRealEngineering3 жыл бұрын
Thank you!
@parth76127 ай бұрын
Excellent videos. Very helpful. Just one doubt @10:22 . No able to figure out the rotation of the new x axis, why did the y and z axis rotate and moved in a straight path? Why is it the case that when an axis at the periphery rotates causes the other two axis to move along a straight line, cant really imagine that part? Another question would be , what are inverse pole figures then?
@rahulrakshit28653 жыл бұрын
Sir your way of explanation is superb..thankyou ....sir kindly make a video on VPSC .
@NotRealEngineering3 жыл бұрын
Thank you.
@move4ward2292 жыл бұрын
Thanks for great explanation, please could you upload video about how to use ASTM to measure the grain size
@mohammedrafi91923 жыл бұрын
Sir great.... Upload more videos
@NotRealEngineering3 жыл бұрын
Sure I will try
@HER_mit3 жыл бұрын
Your videos are excellent
@NotRealEngineering3 жыл бұрын
Glad you like them!
@Victor-mf6kk3 жыл бұрын
Hello, thanks a lot for your helpful lecture. Could you tell me how to plot the xyz (at10:30) in a pole figure? could you recommend me some softwares to plot it based on the euler angle obtained by EBSD?
@wlxie33623 жыл бұрын
Thank you very much for your sharing, which is very useful for understanding crystal plasticity. May I share this video on a Chinese website? You know there are a lot of Chineses can not go to KZbin, I will indicate your original video address, and make sure that it is just to share the video,with no commercial value
@NotRealEngineering3 жыл бұрын
Yes, sure.
@jairoalbertomunoz471 Жыл бұрын
Hello, could you please upload tutorials on how to install and run crystal plasticity models (e.g., DAMASK and others you previously have)?
@NotRealEngineering Жыл бұрын
working on it
@sta_19792 жыл бұрын
Can you please make a video on M-Tex by using which we can generate pole figures especially from neper tessellation output?
@pcr5275 Жыл бұрын
You're awesome!
@NotRealEngineering11 ай бұрын
You too!!
@liboyan70103 жыл бұрын
Sir, can we have a video about RVE Crystal Plasticity in Abaqus?Thank you very much in advance!
@NotRealEngineering3 жыл бұрын
I will try
@liboyan70103 жыл бұрын
@@NotRealEngineering RVE Crystal Plasticity in Abaqus can be great help! thanks a lot in advance!
@liboyan48973 жыл бұрын
How to correctly use Abaqus-Damask?
@jeraldreventh58103 жыл бұрын
Hallo sir, How to plot a pole figure using python , is there any specific module?
@NotRealEngineering3 жыл бұрын
Thank you for the suggestion. Will try my best
@toantruong25812 жыл бұрын
On behalf of Flat Earth Society, thank you for your explainer video.