crytec 5 inch road towable wood chipper

Road towable 5-inch 15 HP wood chipper

[@DrKerr..]

Great job Mack. Think u done two jobs got rid of the branches logs. Also resurfaced the road lol. I have the timber wolf on tracks but currently getting it serviced. Take care.

[@mackthomas8750]

Thanks

[@Luke-pt5rn]

Well done guys I’ve been doing this for a while now and it’s very rewarding tough at times but keep going and keep safe 👍

[@samcanning2]

looking good mate, i delivered the Terminator to you so i’ll be keeping an eye out for the review 🙂

[@SJ_ArbGM]

What does it feel like when youre towing it? I imagine it rattles around which may lead to engine problems perhaps i dont know. Thinking of buying one. Thanks

[@mackthomas8750]

@@SJ_ArbGMrattles is not the word it bounces like crazy and wouldn't want to go over 40 mph towing

[@davidwoodley8261]

Keep up the hard work , but I wouldn't chip towards the road or blocking the path , because you can easily cause damage to vehicles or injury someone , also by blocking the path your causing people to walk across the road and if the injure themselves by doing some eg a car hitting them you are just at fault for the accident if one is caused

[@mackthomas8750]

Thanks for watching and thanks for the advice

[@svetlanagladkih4777]

Well done

[@blsallyearroundgardenmaint1129]

You know you got a Remote Throttle Control on your engine under that there be a cross head screw if screwed out a bit it will put your revs up giving your chipper better air flow

[@mackthomas8750]

That's interesting I might need to give that a try thanks

[@patriciamaughan2128]

Need to see how you made the improvements to get greenery through, arms still go a long way into the machine, not good at all !

[@Fi1del]

hi , great video , i have the exact same chipper, could you do a video on the modification you did with the washers ? cheers from Chile

[@mackthomas8750]

I'm going to do a review of the machine soon I'll probably mention it in that Basically what I did is there are two washers in front of the blade all I did is removed one and put it in between the flywheel and the blade so the blades stick out by the smallest bit more but it made a lot of difference I will try and make a video of it I'm just struggling with time as really busy at the minute would love to make more KZbin videos if I have the time Thanks have a nice day

[@trtrees1694]

Get up there mate! This is definitely a weekend worrier set up. How do you find it after some more use.

[@mackthomas8750]

It's a good machine for me because I only use 3 to 4 times a month and for the cost I paid for it about 1500 for a road towable 4.7 inch wood chipper I'm really happy with it and I think it's great for my business however if you were doing it full-time I don't think it would be the best machine you would need a bigger TimberWolf

[@trtrees1694]

3-4 times a month it looks fine for that. Have you looked into making some bigger sides for your trailer? With some bits of ply and posts you can build a box that you rachet strap down making it easy to take off when you don't need it. I'm looking forward to seeing some more videos of the chipper in other videos and how you have been finding it and problems.

[@mackthomas8750]

@@trtrees1694 That's a good idea Not had any big problems with it yet

[@ts-br8hs]

Can you show us a video chipping and 4-inch stuffed long

[@mackthomas8750]

Will do shortly

[@terryberry9452]

hi great to see a young man with motivation , could you tell me the tow speed ,towing the chipper , thanks

[@mackthomas8750]

Maximum towing speed 50 mph

[@jamesy12ify]

Hi Mack, what happened to the cobra chipper?

[@mackthomas8750]

Cobra chipper was a great machine however it just was not big enough for the work I'm doing It's been sat in the corner of my garage taking up space I'll probably put it up on eBay

[@gingermonsterjonnie]

Why did you go for the disc over the drum, Crytec do a drum version with the same size engine ? Trying to pick a side myself 😂. Great video kid, you will always get the negative elements who are all perfect in their daily work 🤨

[@gingermonsterjonnie]

Just noticed you have one on the Cobra drum, which is better ?

[@mackthomas8750]

@@gingermonsterjonnie cobra one was good for small jobs Crytek is good and I like the disc Style over the Drum as it's easier maintenance and doesn't stall as easily as a drum just upgraded to a TimberWolf tw18

[@gingermonsterjonnie]

@@mackthomas8750 some jump that 👍

[@carlhopkins3857]

Hi is it just a case of putting 1 washer between the flywheel and blade or does anything else need adjusting due to the blade being out a bit more thanks

[@mackthomas8750]

You need to adjust the anvill back and then put two washers between the blade and flywheel

[@orbital47]

Not to do it what he did with the washers

[@grumpydad23]

Hi Mack, how did you adjust the blade?

[@paulraymondstamp4111]

Hi , a year on , are you still impressed with it ?

[@mackthomas8750]

Is a good machine however upgraded to timberwolf as doing jobs where there's 4 of us on site and it was struggling to keep up however is a good machine for the price

[@paulraymondstamp4111]

@@mackthomas8750 what model timberwolf

[@jackbingley5483]

How’s the chipper been day to day mate , have you had any issues with it . Thinking of buying one as a starting point 👍🌲🪓🪵

[@mackthomas8750]

It's been a good chipper and for what I paid for it I cannot complain I've not really had any problems with it yet starts first or second pull When you get it you will need to adjust the blades you want to put the washers in between the blades and the flywheel and it will make them stick out more and it would pull stuff through rather than you having to push it

[@allwoodchippers]

then you have to trim all twigs off the main branches. it is cheap machine any way. are you willing to pay a little more for a drum chipper on trailer?

[@mackthomas8750]

Much rather this machine to a drum chipper as much less likely to block I can take bigger stuff and less preparing before I put stuff in

[@allwoodchippers]

@@mackthomas8750 bingo, that is smart option

[@karlos9564]

Welcome How much oil need this machin in one hours working?

[@scottellwoodgardening287]

Looks like a good machine though for its size mate. Nice job.

[@mackthomas8750]

Thanks

[@orbital47]

@@mackthomas8750 what or how big will this chp up to it looks bigger then 120mm

[@leakso1]

Is it gravity fed or is there in feed rollers pulling materials inwards? How does it do with dead conifer branch? Also silver birch (and other really stringy species branch fibres)? I run a hyundai hych7070, after a few years it's time for somthing a bit more capable. I am a pro tree surgeon so it will be used daily (anything bigger than it can take for chipping is kept and used for Firewood)

[@orbital47]

This can chip upto 120I'm the same size has a compactdick

[@leakso1]

@@orbital47 a compact dick? Dear me, it can't chip all that much then lol.

[@mcgardenmaintenance3354]

Hope your insurance company don’t see it mate because your insurance is null and void if you have an accident as well

[@daveshooter2734]

What’s this like at chipping conifer?

[@mackthomas8750]

I would say that I is Good a chipping conifer very rarely blocks

[@orbital47]

so do it real cut up to 5 inch in diamiter how good is this item

[@orbital47]

I WANNA SEE MORE VIDS OF THIS ITEM SO THINKING FOR GETTING ONE MY EYES ARE ON THIS

[@MrDavatron]

What make is that Chipper fella? also do you tow it on the road ?

[@mackthomas8750]

It is a crytec 15hp tramiter wood chipper yes I do tow it on the road bu only up to 50mph www.ebay.co.uk/itm/164021027379?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338781477&toolid=10029&customid=CjwKCAiAiKuOBhBQEiwAId_sK0WY6-R0ICsA8ToYhplrzXa9qQ5AgXQit4Ggk_vv8a-MYUd87rIplRoCLhUQAvD_BwE&_trkparms=ispr%3D1&amdata=enc%3A1mBbOKLxdReCmFsFD2eKnGQ40

[@Gypsyjohn476]

Circus act of a tree man ,more shite going on the road than in the trailer

[@orbital47]

well the people who sells this item for £1.795 WILL IT CUT UP TO 120MM IS THAT TRUE

[@soloshooter2235]

L bow deep

[@tanglewood777]

that chipper crap

[@tanglewood777]

5 inch my arse