Total Electronics OVERHAUL | P-Bass Upgrade

This affordable Donner P-bass is a well constructed instrument, but can it be made better with new electronics, a handwound pickup, and a brass saddle bridge?
Thanks to Alegree for supplying the wiring kit and pickguard for this project:
Wiring Kit - www.alegree.co...
Pickguard - www.alegree.co...
Previous P-Bass video - • Why 2 Coils? What are ...
#pbass #upgrade #csguitars
More from CSGuitars:
Gain access to exclusive content at: / csguitars
Join CSGuitars Discord - / discord
Buy CSGuitars Merchandise - www.csguitars....
Website - www.csguitars.c...
Contact - [e-mail]
____________________________________________________________________
Description contains affiliate links. Purchasing using one of these links will generate a small commission for CSGuitars at no additional cost to you.
Affiliate Links:
Thomann - www.thomann.de...
Sweetwater - imp.i114863.ne...
Reverb - reverb.grsm.io...
Title graphics and logo by:
www.studiosmith...
Join the discussion at:
Facebook - / csguitars
Instagram - / csguitars
Twitter - / csg_scotland
Music available at:
Amazon: amzn.to/2HUdXgV
iTunes: apple.co/2JvpCjp
Google Play: bit.ly/2KgSzkl
Or stream on Spotify: spoti.fi/2HuYPTP
____________________________________________________________________

[@ScienceofLoud]

This affordable Donner P-bass is a well constructed instrument, but can it be made better with new electronics, a handwound pickup, and a brass saddle bridge? Thanks to Alegree for supplying the wiring kit and pickguard for this project: Wiring Kit - www.alegree.co.uk/collections/wiring-harnesses-and-kits/products/precision-bass-wiring-kit Pickguard - www.alegree.co.uk/collections/bass-pickguards/products/white-precision-bass-pickguard?variant=36893535878 Previous P-Bass video - kzbin.info/www/bejne/jXTThGSMi7CKqbs #pbass #upgrade #csguitars More from CSGuitars: Gain access to exclusive content at: www.patreon.com/csguitars Join CSGuitars Discord - discord.gg/d7b6MY8 Buy CSGuitars Merchandise - www.csguitars.co.uk/store Website - www.csguitars.co.uk Contact - [e-mail]

[@jessegomez559]

Hey dude great video I was wondering on what kind of tuners I can upgrade my Donner to

[@eileenfabri5497]

Loved the video brother! I'm in the same situation... I got a Glarry and am going to do BASSically the same thing.

[@guitarremedy469]

I didn't watch it yet, but I'm sure you did a better job than Rob Scallon

[@NotSosigRamsey]

Colin did a great job, but I must say Rob Scallon's guitar truly is a master piece no doubt his guitar plays/sounds better then any 1000$ guitar on the market ..... Take notes Gibson!

[@TedSchoenling]

Sorry but Scallon's guitar was far more metal than anything this channel has done ;)

[@CalvinBacon]

@@TedSchoenling just because it could kill you 🤣

[@LiterallyJustA357]

Lmao

[@phobos7176]

I nearly cried with laughter watching Rob make his guitar, genuinely one of the funniest things I've seen in a long time!!

[@dutch_urth]

"I doubt I'll ever need anything better than this" Famous last words

[@cwinkels]

If I had a dollar for every time I said that I'd just use it to buy more gear.

[@iliasliakos6692]

The P-bass... the king of the solid body instruments

[@gringogreen4719]

King of the studio basses! 👑

[@iliasliakos6692]

@@gringogreen4719 i love how the mid position pickup respondes to your playing, I need a fender style guitar like that, like a strat or a tele with one pickup in the mid position- no other pickup routing and no trem routing

[@gringogreen4719]

@@iliasliakos6692 You also get the most signal playing directly over the pickups.

[@iliasliakos6692]

@@gringogreen4719 you can also turn the volume on your amp up.

[@gringogreen4719]

@@iliasliakos6692 Volume and attack are two different things. Playing over the pickup gives you more attack. For example listen to early Dropkick Murphys, that's attack. But where you pick or pluck on a P Bass has a huge difference on your tone.

[@AzAtHoTh1666]

The "Stay safe" at the end makes me feel taken care of and protected, Thank you, Colin

[@ibalrog]

This is a good, reasonable, and approachable project for viewers, falling in the space between "everything must fit perfectly or I won't touch it" and "I'm making my own from scratch anyway". I like it.

[@ScienceofLoud]

It was incredibly minor adjustments needed to get it all to fit. I was surprised by how close the Fender stratchplate was to Donner's own

[@triledink]

Love your bass playing man, can't wait untill your fans force you to play primus.

[@RubyRoks]

No doubt the upgrades sound better, but i do think i'd personally mix the new bass to sound closer to the original as i like the duller sound on bass. Easier to make a bright instrument dull than the other way around though, so these upgrades are definitely worth while

[@tambow44]

Curious if they changed out the strings. Makes a huge difference on their own.

[@CrimsonQuandary]

If you didn't want to drill new holes for the bridge again, you could find longer screws for the saddles.

[@jackmcphaden3964]

sounds like there's a lot more mid and high mid definition with the new pickups

[@ReiCow]

I love the Adam Neely shout in the stinger! Moo

[@zeoalexo]

Rancid ftw

[@nwojdak]

Colin, I love all your videos so much, and am always excited to see what you put out. But as a bass player, It makes me even more excited to see you doing anything bass related! Thanks for making such quality content!

[@JC-11111]

Metal Zone!

[@vinnyhydeswt]

NO MIDS, MORE GAIN

[@nasyithrahman9594]

SLAYEERRR!!

[@ALTDOK667]

Knowing me, I would've kept the original bridge plate and pickguard, and just replaced the saddles and electronics. Awesome job, pal!

[@AjCohn]

the old pick guard probably didn’t fit and he had to change it out

[@ALTDOK667]

@@AjCohn Actually, he points out how the _new_ pickguard doesn't fit properly. 😶

[@AjCohn]

@@ALTDOK667 right but he also put new pickups and pots in that probably didn’t fit on the original

[@famitory]

an easy fix for void screwholes on pickguards is to screw the screw through the guard into a little chunk of foam. doesn't help hold the pickguard at all, but makes it look more natural without requiring any intensive extra work

[@COL321]

Nice job, but the saddle being at the end of its travel would bug me, especially as moving it forward a bit would have covered up those old holes! Big gain in sound quality though, I thought.

[@allbassful]

Get longer screws to put your saddles on.

[@frankwhite2072]

I would say that the upgrades improved the presence and character, exactly what it needed.

[@saschaschneider6355]

Great work. What I especially love is that you gave us a visual clue with the T-shirt colour as well. But: "I doubt that I'll ever need anything better than this" sounds like any pre-GAS guitar player ever. Either you'll find reasons why you actuallly need another bass ("In case it breaks!") or you'll simply want one. Ask me how I know ;)

[@EversonBernardes]

I mean, a P-bass is nice, but... it's not a J-bass. Or a MusicMan. Also, 4 strings is kinda limiting :D

[@kylepetersen6520]

I feel that bridge on a spiritual level. I got an 80 (U.S.) dollar guitar and the neck was 25.5 in scale length and let me tell you the bridge was way to close. so I tried moving it back, btw this was an S-style guitar and it was a pain because I didn't really have to proper tools to do these kind major modification. so I used sand paper to remove material. then used maple trim with super glue to add material. and I drilled new hole filled the old, and it... didn't work i need to more it back more, but i didn't want to do that all again. so I took the same maple trim and added it to the end of the neck in order to get the space i needed. finally it worked, it's not the best guitar i have by far but it's still fun to play and I'm glad I didn't give up on it. probably spelled so stuff wrong but i think y'all can figure it out

[@gabrielestrada9682]

love the accent big reason im here

[@SteveWeltman]

The tone difference was very obvious to my relatively untrained ear and it sounds more powerful with the new electronics... more tired and more subdued with the older electronics. Cool build out! Thank you for posting.

[@lruddy8820]

I just had my first child three months ago and i secretly hope she becomes a bass player

[@ibalrog]

I don't think it's secret anymore.

[@dicecard921]

nobody asked, parentjacker

[@nicolamontoro]

Brilliant as always. Need more you tubers like Colin!

[@coachgb]

I’ve got to admit that I’m shocked how much the upgrades changed a budget bass. Super cool!

[@everready19373]

You could always glue some pieces of wood into the control cavity so you can screw the pick guard down.

[@alanburns8362]

It warms my heart to see a self-proclaimed guitarist having a ball with a p-bass.

[@aaronwebb1548]

Excellent, I'm gonna do this with my friend's busted Samick. Cheers Colin!

[@jamesmarkham7489]

New upgrades sound great! Love to see more complex upgrades for the bass. Series/parallel switch, varitone pot or diff tone capacitors.

[@Jipwell]

I bought one of these thanks to this video. I’ve kept the hardware the same but I’ve been stripping it of the paint. I think I’ll replace the pickguard with a black one at some point though

[@d_exx]

The fact you covered Rancid in this video makes my heart very happy! Haha

[@christopherjunkins]

I love that little shoutout at the very end to Adam Neely

[@alexandervos2275]

Wow!! What a difference!! Great job!! Love that you are playing Rancid 🤘🏼😁

[@Wakaboo14]

Ooooooo wasn't expecting a Rancid track to be laid down! Matt Freeman is deffo an underrated bass player!

[@SpacemanXC]

You're the friend ever guitar player wishes they had.

[@f0rth3l0v30fchr15t]

A totally cosmetic thing, but you could: 1. cut the shank off some screws and glue the heads in the vacant holes on the pickguard 2. (if it will fit) drill pilot holes into some bits of scrap wood to go under the vacant holes and screw those in (has the advantage of not using glue, and therefore being easier to undo).

[@RJW14]

difference is night and day with the new and old stuff, wow. As you said, it's clearer in a mix.

[@meisenhut31]

Get yourself a similarly priced Jazz Bass and give it a similar treatment. It would be cool to see a side by side. Where the P bass excels in pick it up and play qualities, I find Jazz bass gives a little more room for experimenting while never creating a bad tone. Keep it up!

[@nomaed]

New setup is brighter and tighter. Sounds great!

[@mihovildanicic5305]

If you ever decide to revisit P bass electronics try linear taper volume potentiometer (I find audio taper volume too quick in passive P bass) and 0.1 uF capacitor (I find 0.047 uF too weak all across and too "middley" at the end). Have a nice day!

[@RavenMadd9]

thinking about doing the same to a old ltd b-50 pj bass ...fun watching your vid ...thank you

[@linaubrey2678]

Patreon squad!

[@hazrod13]

Squad !

[@StevenFines13147]

Squad!

[@JuveriSetila]

@@hazrod13 (Hi Lucas)

[@hazrod13]

@@JuveriSetila (Greetings, Grand Archivist)

[@daisuke_thrasher7032]

Epic Adam Neely reference at 10:06

[@Furtheronmusic]

Definitely the new set up has more punch and stands out in the band mixes more

[@Jihadbearzwithgunz]

Using wera tools too my man.. Solid job.. Don't know how I haven't seen this vid from you till now

[@rpycmHblu1]

that tone difference tho. I always knew that getting a Chender P bass and dropping a great pickup in it is the way to go

[@gringogreen4719]

Great video! Yes all of these are issues on any Fender clones. I have two inexpensive basses. My Johnson I had the same issues as this model. What we did was just replace the pickup and electronics, same as you. That's all. I also sticker bombed it so it looks like a proper Psychobilly/Punk bass. My Squire we replaced just about everything except the neck, tuners and body. It has a P/J pickups setup and even though the Duncan Designed pickups came out of a newer Squire Jaguar, the J pickup did not fit. Yay filing!😐🤘 Even with Fender to Squire parts there were issues. The Fender high mass bridge was pretty easy. The pots were different as the two volumes were full sized CTS pots and tge tone was a mini pot due its position. The pickguatd screws also had trouble lining up, some did, some did not. If you are doing a project like these I would suggest going for a Bournes minipot as a solution because otherwise you may have to route or it may not even fit. With a Fender clone my recommendation is to swap out fewer parts. Parts designed for Fenders really won't work well on clones unless you go all the way like on the bridge and pickguard on Collin's bass. If you want a cheap mod with many options go for a Squire model and realize even though you have a Fender product it does not mean that everything will work or fit on it without some extra work past dropping them in. That said once you have an upgraded bass, it's definitely worth it.😎👍✨

[@stephanematis]

Sounds great. Simple and effective upgrade.

[@bpabustan]

the new electronics is happening! it has a greater clarity and punch.

[@Dorngrunder]

"A fully operational battle station" 😂 Yes! 🤟

[@RobertNolan]

I did basically the same thing to a vintage Aria Pro II "Precise" Bass (heh,) but I chose a high mass bridge with brass saddles.

[@chrisgoblin4857]

Can't remember the last time I was this early. Great vid as always Colin. Keep it up!

[@nathanmclauchlan5148]

Definitely sounds better with the upgrade

[@alastor1052]

Sweet clanky P-bass goodness, awesome!

[@JohnHenryJr]

Have you done a video specifically on "high mass" bass bridges? I'm curious to hear your scientific take on that. I ask mainly because I'm a bassist, and recently *removed* a high mass Schaller 3D bridge and replaced it with a very basic F-style, 4-saddle, bent plate bridge. And honestly, *if* there's a difference it's that my bass sounds way better with the "low mass" bridge.

[@TRiToX91]

May the algorithm be ever in your favour.

[@oncameramastery]

Seems a solid improvement to me! 👍

[@AHGrayLensman]

I did something similar to this to my cheap-@$$ Squier P-bass. I put in a Seymour Duncan Quarter-Pounder P-bass pickup and a Bartolini TC3 preamp on a push/pull switch, so I can get either a pure passive sound or an active sound if I need a boost. Greatly increased punch and clarity compared to the lame stock pickups.

[@FISHYFILMPRODUCTIONS]

The sound was the same to my ears but its came through more with the upgrades

[@dionr1168]

Colin must be a Palpatine fan at 0:39

[@mctweddle]

I had a similar problem with the Wilkinson p bass bridge saddle screw length. Bought one for an el cheapo that I was refinishing and rebuilding for fun, then I rescued a beat up SX bass as well. The SX was the better bass so I decided to put the Wilkinson bridge on there instead. Had to use the screws from the old SX bridge to get it to intonate properly because there just wasn't enough length in the original screws to get the saddles forward enough. Maybe Wilkinson should consider supplying longer screws?

[@pensnut08]

Definitely an improvement!! Nice job!! Why not a high mass bridge? Just wondering.

[@vesheljinn]

Nailed the Matt Freeman tone there pal

[@ScienceofLoud]

Thanks

[@user-xs8co2xr9v]

Fill those empty screw holes with 30mm long screws that go into the floor of the cavity. They do nothing but hide the holes.

[@A.J.K87]

Just purely for the cosmetics I would get some more scratchplate screws, cut the heads of and glue them in the open holes.

[@scottv4186]

should have put little blocks of wood (or something) to allow you to put screws in all the holes, so they at least look complete.

[@matthewbatters9112]

The empty screw holes you could use magic screws just cut the head off and glue it in

[@danzigjr]

Slightly better. TO THE MAX!

[@vincentmasterbassist6784]

Thank you for using fingers on Iron Maiden. Bless you.

[@juanvaldez4043]

Always enjoy the vids!

[@sonorational6521]

Colin went full Adam Neely at the end

[@StevenFines13147]

You probably could have used the fender high mass bridge, which is longer fore to aft and has much more travel in the saddles.

[@fatpad00]

The new set up has quite a bit more noticeable attack. I think that's why it cuts through the mix better

[@UkiMalefu]

maybe cut the heads of some screws and glue them on the unused pickguard holes?

[@haroldiniho726]

Would have been fun to head got the time by anthrax the bass in that is just crazy 🤣🤘

[@xero_2003]

Can you do a video for PJ pickups? I kinda need to know how to do that

[@DadPlaysBass]

I honestly didn’t notice anything different. They sounded exactly the same thru my AirPods

[@ScienceofLoud]

I think I can spot the issue here...

[@AlanShortySwanson]

OMG HE PLAYED RANCID hell yes!

[@JuveriSetila]

NOTIFICATION SQUAAAAADDDDD

[@hazrod13]

Squad !

[@JuveriSetila]

@@hazrod13 (Hi Lucas)

[@hazrod13]

@@JuveriSetila (Greetings, Grand Archivist)

[@DMSProduktions]

Och aye 'tis a nice thumper now Col! \m/

[@d.o.1554]

0:33 hehe...knobs.... hehe solid shaft....

[@jpbguitar6470]

patreon squad!

[@hazrod13]

Squad !

[@JuveriSetila]

@@hazrod13 (Hi Lucas)

[@NebulonRanger]

4:11 Tony Hawk's Underground 2!

[@raymondnitz4417]

Discord!

[@quisquillatv4329]

The old ones have a pass dirty, but the clean sound was horrible. Dunno how much were the wilk and the pickus, but the change really was substancial.

[@KingTheAlba]

If you’re still doing the tata videos, could elaborate on the difference between a cheap vs expensive guitar pedals?

[@midi510]

I prefer a solid shaft.

[@jonmatthews4254]

Rule One - Think it through and get parts that fit!

[@erslippers3805]

As lovely as the upgraded one sounds, I feel like the unupgraded one would djent better.

[@ChrisHopkinsBass]

I did something similar to Johnson/AXL PBass I bought on eBay last year for £35. I fitted it with a Fender HiMass badass clone and an active EMG P pickup. I had to drill for a jack socket on the side of the body because the cavity was too small to give enough clearance for the stereo lugs on the socket

[@generalawareness101]

I have a bass my sister found in the apartment building's rubbish container a few years ago. All I know is it is a Sears, and has a weird single pickup, and has four strings. Everything is there but the electronics, and the plate that held them (the pick guard is there). I wonder where can I go to find out what this is then find out if it is worth repairing (it is from the late 60's I believe), or if I can even find the plastic that held the pots? I doubt this ever had a switch since it is just one pickup (weird looking thing I think may be a gold foil).

[@garettturbettmusic]

So the wires can cause a good pickup to sound like a cheaper one? (I assume same with the pots?)

[@PooNinja]

All The BASS!!! Wait what?

[@soaps1338]

Idk if its a filter or the lighting, but the bass without the upgrades looks like a completley different instument, like its theres less contrast, or is it just me?

[@tolvajakos]

you can always just get longer adjustment screws for the bridge saddles, can't you?

[@maxogesten6928]

Was it possible to keep the base plate on the brige and just swap the saddles? Just a thought...

[@paintedeel1356]

Hey Colin

[@fragb4ll]

Squaaaad!

[@hazrod13]

Squad !

[@JuveriSetila]

@@hazrod13 (Hi Lucas)

[@hazrod13]

@@JuveriSetila (Greetings, Grand Archivist)

[@lordofnesss]

You can notice instantly when a guitar player tries to play bass.

[@dip_doop]

he still sounds good though

[@lordofnesss]

@@dip_doop Oh yeah !! He sounds very good !

[@user-bi3id6bg3g]

😢Hello, something is wrong with my guitar, the sound is bad, what do you advise?😂 please give me some advice!!!😊