CSL Pedals Unboxing & Video Guide

[@muaythai193]

Screws for hard mounting should be included…

[@RedPainSam]

True

[@HugoBroers]

what are those screws??

[@SizzlingSquiggle]

For real

[@misterpervysage476]

I feel you but does your rig not include them? Mine did

[@SizzlingSquiggle]

@@misterpervysage476 my rig did not. It had lots of extra screws for mounting things but none with the right width, threading, and length that I needed to mount these pedals.

[@josidina6084]

Is Loadcell brake going to be available soon please ?

[@jahshjahsh2002]

I hope we see a video of the pedals mounted in the inverted position.

[@AlessandroACC]

When is the loadcell kit going to be released?

[@-pappy-]

Pedals are great but Please Fanatec can you update us on when the LC kit will be available? It's been "coming soon" since the pedals release. I refuse to purchase the clutch kit and be left with a spare pedal that will never be used again. The lack of info around this is driving us all crazy. Praying we actually do see this in 2021 but very much doubt it.

[@levirockholt1732]

been wanting to play RF2 for a while now I can

[@Ivwin]

when are we finally going to be able to buy the lc kit for this?

[@KZ_drift]

Thanks for make better more budget pedals cause my t3pa pedels r not to good for drifting

[@timothybuchholz9225]

Thanks for including the mounting bolts fanatec. Why would you not include hardware?? Beyond frustrated

[@rubenaraujo06]

I don’t have a rig can I use it on the floor

[@ExileTheKingHD]

So I've followed all the steps but the pedals are not working at all when I go to check the calibration. What is going on here?

[@ricardogzz]

Same, did u fix it?

[@naygon]

@@ricardogzz Yes same. This is after a RMA too.

[@TomC8042]

@@naygon Did you fix?

[@logiicmiindz2525]

Do these pedals come with loadcell or do you have to buy the SP clubsport loadcell kit? Or is the loadcell in the clutch kit.

[@DomB_Fanatec]

The CSL Pedals are a two-pedal set without load cell brake. There is a CSL Pedals Clutch Kit if you want to make it a three-pedal set (also without load cell brake). If you want to add a load cell brake, you have to wait for the CSL Pedals Load Cell Kit, which is not yet released. If you purchase the CSL Pedals Load Cell Kit, you do not need to purchase the Clutch Kit, because you can convert the standard brake pedal to the clutch. Please check the product pages for all the info.

[@matejkaltenstein3532]

3:00 can be use on xbox with clubsport adapter

[@CJ-uh8bk]

No, they have to plug directly into a Fanatec wheel base in order to work directly with the Xbox unless you get a third party device to do so

[@buhillo46]

The base for the pedals that appears in the video, is it possible to buy it somewhere? or will it be available in the future with the loadcell brake?

[@DomB_Fanatec]

Hi buhillo46, I think you are referring to the pedal plate of the RennSport Cockpit V2. This sim rig is available to purchase on our website (but only in EU region). The plate is not available to purchase separately.

[@buhillo46]

@@DomB_Fanatec Is there a pedal plate that is sold separately? It's a shame that the pedal plate RennSport Cockpit V2. not sold separately, would be very successful with new csl pedals

[@DomB_Fanatec]

@@buhillo46 We don't offer a separate pedal plate - there isn't much demand for it because all our pedals are intended to be bolted directly to a rig, and have a heel plate as part of the design. Most sim rigs come with a pedal plate or some other mounting solution for pedals. The CSL Pedals mounting points are the same as the CSL Elite and ClubSport Pedals. This means that the vast majority of sim rigs and wheel stands will support the CSL Pedals too.

[@JoaoRabit]

Wait so you need to plug in the pedals directly to the PC in order to update the firmware?

[@DomB_Fanatec]

The CSL Pedals in their standard configuration (or with Clutch Kit) do not have updatable firmware. The video demonstrates how to update a Fanatec wheel base in order to ensure compatibility with these new pedals. If used as a standalone USB device, i.e. with the ClubSport USB Adapter, you need to update the firmware of the USB Adapter in the same way. Once the CSL Pedals Load Cell Kit is available, these upgrade the electronics and give the CSL Pedals its own USB connection. Then you would be able to update the pedals firmware directly.

[@javivega8938]

heelo,@Fanatec , if you dont have a fanatec whell like me, how can i change the update to csl pedals and NOT csl ELITE pedals?

[@javivega8938]

i have the adapter by the way

[@DomB_Fanatec]

@@javivega8938 You should download driver 405 from the Downloads section of the ClubSport USB Adapter product page (we added the 405 driver to this page because it specifically improves support for the CSL Pedals with the ClubSport USB Adapter, it has no other difference compared to driver 402). Then update the USB Adapter firmware with this driver.

[@Jedtgill]

What is the purpose of moving the pedals up or down? What are the benefits of it?

[@MikeCheng91]

for different size of feet. if you have a small feet you want it to be lower so you can rest your heel on the plate. that way when you brake, the whole pedal don't lift up. if you have a bigger feet, its for you to be able to use your toe or the part that close to your toes instead of the middle of the feet to brake.

[@prelogic356]

Can i Connect it with my logitech g29

[@giuseppe874]

hello, how should the load cell brake and the accelerator be connected with the Rj12 cable, I have eliminated the clutch thanks, can it work without downloading the latest drivers?

[@alessioct22]

Hi guys, can anyone tell me what bolts are needed for both the steering wheel and the m6x10 pedals?

[@SONofaKING1]

Where is the Proberty Page, i cant find it

[@tommyz23]

Is it compatibile with g29??

[@Azerty00075]

Yes. You just need to plug it with USB directly to your PC. The accessory is sold separately tho

[@DomB_Fanatec]

If combined with the ClubSport USB Adapter (sold separately), you can connect the CSL Pedals to a PC as a separate USB input device, therefore you can use the pedals in combination with any wheel base (from any manufacturer) on a PC. For use on a console, the CSL Pedals it must be connected directly to a Fanatec wheel base.

[@josidina6084]

@@DomB_Fanatec Can you use this pedals with USB adapter and Drivehub Collective minds for consoles ?

[@DomB_Fanatec]

@@josidina6084 We do not recommend and are unable to provide support for third party adapters.

[@CJ-uh8bk]

@@josidina6084 yes you can but results vary as it’s third party

[@RajveerSingh-rq1hd]

Does anybody know how to fix a fluctuating load cell brake??? I just opened these and this issue was already there 😭😭😭 it gets worse as I turn down the pressure sensitivity, if anyone knows how to fix it please help.

[@explotion2500]

can someone please help me? I bought the normal csl pedals but the throttle is weird. I have to press it down at least to 50% for it to "recognize" the 1% pressure. help please

[@coryjohnson6900]

😪 just received them today and the brake pedal doesn’t work

[@stickvortex]

The cable situation is explained really badly on the physical manual…. I plugged in the wrong cable at first, luckily I didn’t start anything up so I hope there is no issue…

[@bluedemon8306]

Throttle not responding to anything on xbox or on the ps5 tried it without loadcell Kit and tried it with it being connected still nothing latest driver is installed ??

[@raphI_I]

Screw for hard mount not supplied

[@bas7499]

Wireless quick release firmware? Is that a teaser or is it something I just have never known about it?

[@DomB_Fanatec]

Podium wheel bases have always had wireless quick release firmware. It refers to the internal wireless data and power transfer for the quick release system (this allows our wheels to connect to our direct drive bases without the need for external cables).

[@sadclown887]

I did all of this and the pedals still don't work on console and pc. I have taken a ticket but have to wait up to 7 working days to hear back from them.

[@JurritVisser-nw8cs]

Well, after three weeks of trying to get it work i have send the stuff back. Without returning my payment they can decide for themselves to throw it in the garbage or not.

[@naygon]

Same here. Over 2 months in RMA and they send back more trash that doesn't work out of the box. Never again.

[@raphI_I]

I have an issue with the throttle pedal, i must push to 50% the throttle to be considered, help me please

[@raphI_I]

@@oneyawdie6139 i think its a good point, also check if everything is well pluged at the right place :/

[@brendonglennie6843]

When will the load cell kit be available?

[@DomB_Fanatec]

Soon!

[@brendonglennie6843]

@@DomB_Fanatec when?

[@lucadude4039]

I would love to get a full fanatec setup but it is ridiculous how I need to pay a extra £350 just to get it shipped to the UK. I don't want to get a Logitech or thrustmaster set up. If anybody can help me maybe even fanatec.

[@DomB_Fanatec]

This is not how much the shipping costs to the UK. Please check our website again for correct shipping costs to your address, or use the Live Chat system to discuss it with Customer Service.

[@rickyjohnson9024]

It's about 30 quid to get it shipped to UK depending on weight of the packages

[@Steezy93]

@@rickyjohnson9024 wrong it costs £30 from fanatec then you still have to pay £100 import tax

[@angelg7120]

No traen un software donde poder configurar las curvas de frenado?

[@Snuifduif20]

Do you need to update the filmware for xbox to or not ?

[@DomB_Fanatec]

The pedals in this configuration are not firmware-updatable. However, your wheel base might need a firmware update in order to be fully optimised for these pedals.

[@1uponu705]

@@DomB_Fanatec what if we don't have a PC? Just a xbox series x

[@1uponu705]

@@DomB_Fanatec I just the purchase my first sim rig. Bought yall new csl dd..wrc wheel..these pedals..shh shifter ..gt omega art cockpit. I hope these work out off the box for me

[@ricardogzz]

Stupid pedals won’t work with the USB adapter

[@Hakeem597]

EXACTLY>>> THEY DON"T TO THIS DAY!!!!!

[@mikascherhag8909]

theres is no wheel properties shortcut and the pedals are not detected by the fanatec control penal

[@niels7628]

i have the same. what do i have to do?

[@mikascherhag8909]

@@niels7628 I generally don't know it just randomly worked

[@niels7628]

i have a trustmaster t150 so i cant put the rj12 cable in there so i bought a rj12 to usb cable to put it in my pc but it doesnt work. the cable is not from fanatec btw

[@jirkadolezal8127]

is it possible to connect pedals with thrustmaster steering wheel to ps4?

[@mybrotherskeeper2428]

I’d say no. TM has a completely different connector

[@jirkadolezal8127]

👍👍👍👍👍👍👍👍👍👍👍👍

[@Zerkyie]

The fact that you have to drill to hard mount is stupid. Other than the mounting they're great.

[@DomB_Fanatec]

This product does not require drilling. The drilling template is only necessary if the rig/wheel stand you wish to hard-mount it to is not pre-drilled for this hole pattern, then you would need to create some holes. But most sim rigs are pre-drilled for this hole pattern, because it is the same as our ClubSport and CSL Elite pedals.

[@SlyNine]

I'm just gonna use the back two mounting points... Don't tell DomB tho. Shhhhh

[@JerryBaldwin-s1w]

Ferry Green

[@oatsmcgoats0182]

wow. nothing on Fanatecs webside told me i had to order an extra adapter. would've just went with the thrustmaster pedals that i cancelled my order for if i knew this. unbelievable. false advertisement

[@JewelCarratura-x3z]

O'Connell Bypass

[@gfgfdg-y5t]

Syble Greens

[@DoddCarter-d9k]

Edmund Terrace

[@ar993094]

Lol my pedals came with no bottom plate 🤣🤣😂😂

[@MarieEdwards-u4b]

Roberto Lodge

[@RobertRink-v3u]

Richard Park

[@AgustinPrestwich-o1l]

Saul Ford

[@RosalieBland-u1w]

Hamill Valley

[@VanitaFabrizi-m9f]

Makenna Stravenue

[@karma-xv1fd]

Works for Xbox ?

[@ProbLeah]

Yes it does

[@VirginiaKeith-j5v]

VonRueden Knoll

[@RodneyFlores-t3e]

Kshlerin Shoal

[@SusanMoses-i5x]

Crona Forks

[@MarjorieHaurin-q1z]

Murray Cape

[@DickensDale-n4j]

Raoul Cliff

[@PatriciaSiebert-k5u]

Howe Harbor

[@DoloresRichardson-n8q]

Boyle Mews

[@NortonElaine-m4m]

Bayer Mountains

[@TaylorHowar-q8r]

Fritsch Lakes

[@GeorgeJones-w8z]

Titus Loop

[@arsenvain]

Why this guy has so shake hands?!

[@piuse-q2x]

Imogene Summit

[@ShariSoucie-l1q]

Heloise Islands

[@AlanMaranto-j4c]

Carmelo Lane

[@jamestaylor7045]

Could have included hw lol cmon

[@PeggyCueto-x5p]

Lou Drive

[@nnnyte-n4l]

Block Pass

[@andmo90]

wwould be nice to at least know the size of screws needed for hard mounting, but your bankrupt now so gg

[@Hakeem597]

THAT USB CONNECTOR IS GARBAGE AND DOES NOT WORK!!!!!!

[@VanitaFabrizi-m9f]

Makenna Stravenue

[@DickensDale-n4j]

Raoul Cliff