Sim Racing Gear I'd Buy If I Started in 2024

[@OCRacing]

Daily Sim Racing Deals: www.simspots.com/ SIm Racing Discount Codes & Affiliate Links: www.ocsimracing.com/discount-codes All of my Sim Racing Gear List: www.ocsimracing.com/ocracing-setup

[@bgdaddy42069]

still weird to see your face got used to just seeing you walk by and stuff lol

[@mrshankly6731]

Maybe you should do a recommendation series for 2024 depending on budget in a series of separate videos. $300, $500, $700, $1000, etc

[@alxti]

please! I have been trying to find the best value parts for $500 but its complicated.

[@Xxdirtygranny420xX]

@@alxti maybe a cammus c5 and thrustmaster pedals, you still have some wiggle room

[@Xxdirtygranny420xX]

you can find a logitech shifter or alibaba shifter and handbrake wich this channel has also covered, if you want a better shifter and handbrake you will have to sacrifice a lot and get a t300 wich i dont think is sworth it

[@MylesPerHourG59]

Yeah that would be cool cause im looking at a $3000 budget

[@sampic_]

​@@alxti marketplace t150 or g29 or g920 with simjack pedals if you're on pc.

[@orangeavenger1597]

Bro this isnt a starter setup. You've been doing this too long.

[@AIIu_]

He literally said these are things that HE would buy if he started in 2024.

[@viktorvikit5788]

@@AIIu_ yeah? started means started out so he's making a video for the people who's starting out the hobby to get the best experience without paying too much for something you don't know if you're gonna like

[@AIIu_]

@@viktorvikit5788 Yes that's the video, what do you mean? I'm just clarifying that this isn't a video for someone who's looking for a cheap starter pack.

[@trihard42069]

@@AIIu_ If he actually "started" in 2024 he would not buy these that's the criticism

[@trihard42069]

@JoshLopez-k6t because its marketed to beginners? which is terrible advice for beginners... kinda obvious the issue. He could of used a different title, but he obviously did it for views and to clickbait beginners, if you can't tell that idk what to say "buddy"

[@Hoops527]

I felt this was super out of touch with the average person getting into sim racing. No human should be spending this much money on something unless they are 100% confident they're going to be deep into the hobby, or budget isn't an issue. Personally for anyone looking to 'get started' in 2024. Go onto marketplace, and pick up a used g27 or g29 rig for less than $150. Gives you time to confirm you enjoy and offers a bloody brilliant value for money proposition. Once you're stuck in, then you can think about spending $700+ on something you know you'll love if it's in your budget.

[@Elurael1990]

agreed, got a TS300 + Acelith open wheel mod while saving up for the 488 GT3 Wheel. I'm having tons of fun

[@Yui69420]

I think this is a good video for your 2nd sim setup. Used G27, G29, driving force gt, to start for sure. That said, if you already have experience sim racing (say at a friend's house) and are sure you want to continue with the hobby, I do think you should skip the G27 and go for a $7-800 setup. I had a G27 for years, and recently upgraded to an alpha mini and simjack pro pedals. The difference is huge and I wish I would've made the upgrade much sooner. You can probably be just as fast with a G27, but a dd wheel and load cell pedals makes for a much better feel, more akin to driving a real car.

[@ThomasHOL]

I do agree that if you have never raced anything this is quite high spending when you can start with a G29 strappede to your desktop so you get a feel for how it is racing. also i feel that he is disregarding the Moza R5 bundle. In my country its only about 120$ more expensive and there is night and day difference in those sets. Personally i'm disregarding my own advice a bit. 20 years i had a stearin wheel for racing it was without force feedback or anything else. but it was hard getting it to work and having to set it up and take down all the time ment that i didn't use i to much. But ever since that time i have wanted a dedicated rig and every time i had the opportunity to jump in one i did. Now my oldest kid have moved away from home and i finally have the space to build a setup. So i'm going to buy a cockpit, find a 50+ tv to put on the wall and then go for a Moza R5 set. Yes i dont know if im going to use it as much as i hope but i have to give it a go.

[@Driver_1227]

I couldn't agree more. I started with the G29 cause I wanted a wheel that I could use on my PC and PlayStation5. Now that I'm hooked I'm looking at these more expensive upgrades. Tho my big game of choice is American Trucking Sim. the one of choice for me is gonna be the Moza for the fact they offer a truck wheel. And they have a packaged deal for $689. I'll just have to pick up the truck wheel later down the road. No pun intended lol. But yeah get a cheaper wheel to make sure you're gonna spend some actual time using it otherwise it could turn into money wasted in the corner of your space.

[@Erowens98]

Yeah, something like a used T300, with t3pa pedals. Clamped to your desk, or if you want, bolted to a cheap and dirty 2x4 custom rig (those cost like 40$ and an evening of work) and a junkyard car seat. If you want an H-pattern coupled with an SHH newt. You're talking less than the cost of just the motor for the direct drive offerings. And are gonna have plenty of fun. You can then upgrade later when you get a better idea of what your looking for. Personally id avoid G27/G29 because they're less powerful and less smooth than the t300 and on the used market, at least where i live, usually around the same price.

[@shreyanshsingh1363]

Note :- The title might suggest it but this video is not recommended for beginners who are unsure if sim racing is their hobby or not. This video felt super out of touch from reality of an average person thinking about starting sim racing. Get a second hand g29/g920 or other options in that price range and if your budget allows T300 rs Gt for PS5 as it will be far more cheaper and will give you a great entry point into sim racing. Also, some of my friends who compete on top levels still use g29 with upgraded load cell for brake pedals. Spending $1000 on a hobby you are not sure about isn't smart in any way.

[@chp617]

Yea upgrading your sim setup doesn’t necessarily make you faster and that shoudn’t be the reason to upgrade. Like you mentioned, also with a G29 you can make it to the top of the leaderboard. I would upgrade from my G29 purely for the experience and extra enjoyment of simracing.

[@jgripen969]

You should at least get a direct drive set up, otherwise you’re not getting the true experience of sim driving/racing. A used Moza R5 is a great start, you can couple that with a set of cheap pedals and H shifter.

[@Thermophobe]

"to start with" sounds more like a combo of what you liked out of everything you've tested.

[@lighnr]

this whole sets you recomended is far beyond the 1000 dollar mark. No one is spending over 1000 dollars just to try out sim driving/racing Edit: why the hell am i the top comment and how?!

[@Ryan-mb9iu]

i'm about to

[@aintchrss]

@@Ryan-mb9iusame here.

[@darbstre2900]

Just did.

[@AssettoVerbs]

Used to autocross tires are expensive even junk yard tires get expensive plus admission to the place. I'm looking at this to save money 😅

[@jmannthethird]

My dad just sent 2k on his first ever sim racing setup

[@Checuliao]

I literally began looking for sim gear this monday and i speedran all the vid this channel has. Well this is timming

[@OCRacing]

You know I got you 🤣👍

[@0-60STYLE]

I actually bought a GT Elite because of his review of it lol

[@OCRacing]

@@0-60STYLEI do! Just click on any of my Amazon links on my description and it’ll have a 30-day commission time window 🤣 appreciate you

[@army0910]

At 1:47 this dude said $400 is a good entry. WTF who's money are you stealing all I have is $400.

[@army0910]

@Envixitynix2211 So I bought a wheel with pedals and shifter with shipping for less then $450...sooooo....yea your wrong.....www.alibaba.com/product-detail/PXN-V12lite-bundle-direct-drive-gaming_1600730643594.html?spm=a2700.find_similar.normal_offer.d_image.25495f93AIVCqH

[@susblasian1433]

@Envixitynix2211bruh for ENTRY a logitech g29 with a shifter is all you need which you can get for less then 400. You don’t need to spend 400 on that bs unless you know this hobby is going to be something you want to do long term, then you get shit like that.

[@hazioyt5628]

Fr tho

[@drzcrazd]

used market to save money

[@bm373]

The amount of people that confuse "starting" with affordable! Lmao! I'm just starting with a $1500 budget and I appreciate this video. There's thousands of under $300/$500 starting videos as it is!! ✌️🇺🇲

[@LeMamour]

Oh my guy is showing his face now. Nice to finally meet you OC.

[@jasonrebelo181]

Ye that caught me off guard too haha

[@angryoldcanadian3905]

$400 US is around $600 Canadian. This is $200 more than I spent for my entire initial setup. The problem I have with most racing channels is that their ideas of 'budget' is mid to high tier for most people starting out.

[@OCRacing]

I never said these were “budget” recommendations. In this video I give my thoughts on the best value (in terms of bang for your buck comparing dollar spent versus value gained). Never did I say these were budget friendly recommendations…

[@fakee7744]

@@OCRacing Well if you target it for new people it makes sense they don't want to pour in $2k+ dollars immediately. It's like recommending a car for new drivers and telling them to buy 2024 Honda Civic. Don't get me wrong these recommendations are great, but I don't think they are for new sim racers, more for already "experienced" sim racers who really want to get deep into the sim racing. TLDR - If you aim it for new commers it makes sense they'll look for budget options.

[@susblasian1433]

⁠@@OCRacingYour title says people who are just starting. if someone is just starting they wouldn’t want to pour acouple thousand let alone 500 or more into this. Should change the title to something else. Something for a beginner would be something like a G29 with a shifter then if they find out they like the hobby and are into it they upgrade into stuff like you mentioned in the video. Imagine the people who watched this vid and bought expensive shit just for them to fall out of the hobby a month in. I feel like directing this video to new people is wack. The guy original comment and the guy above me are right 100%

[@zaks7]

Hard budget? Get a t300rs gt used and don't even look at a logitech.

[@zaks7]

I got a bundle with a playseat for 300 used, but it retails for 300 euro new, decent pedals and good belt driven wheel. Please don't buy logitech g29 idk why everyone still recommends it

[@slider9162]

Went from Fanatec gear to Simagic alpha mini and P1000 pedals. Best sim purchase I ever made.

[@kevinblythe2192]

Yes, I went Alpha Mini. It uses 18bit high resolution encoders for a start which achieve 264K, not the 15bit medium resolution encoders you get with the R5, R9 and R12 which make only 32K. This results in NO cogging when you turn the wheel on the Mini and is really smooth plus stronger ffb than the others mentioned. I also use it with the GT Neo wheel and VRS pedals. Just an awesome combination.

[@wangte27]

Exactly this but OC doesn't even mention this. Or the fact that of these, only Simagic can feature 360hz FFB on iracing and can be mounted any which way without having to pay more for mounts.

[@stefanoviaggio8096]

Conspit cpp is the best pedal set for the price, P1000 is meh..... Bad product for value

[@CoastGaming]

@@kevinblythe2192 any chance you know what Logitech g pro wheel is? im making my decision between them and fanatec since i dont have many options as a ps and pc user wanting to utilize both otherwise id hands down go alpha mini

[@kevinblythe2192]

@@CoastGaming No I don't but the recent takeover of Fanatec by Corsair inspires confidence and would seem a very good place to start looking given consol and pc compatibility. A proven product line with a small profile so as not to obscure the screen in any way. Plenty of youtube reviews to check out and a good choice of accessories. Good luck choosing what is right for you.

[@mkatakm]

I am just starting and today I ordered an Moza R12 base, a CS V2P wheel, CRP pedals and a stand for the set. I believe these are more than enough for a starter.

[@merricksandersonNZ]

That’s what I bought 2 weeks ago and I’m loving it no regrets

[@wangte27]

The CRP pedals are really unimpressive for the price though and the R12 is weaker than supposedly 10nm simagic alpha mini. I blame moza for false advertising

[@mkatakm]

@@wangte27 I will hopefully see myself in few days.

[@RADERFPV]

​@wangte27 That's only true about the V1 version of the alpha mini. The current version V3 is capped at 10nm. Still great though.

[@mkatakm]

@@wangte27 CRP pedals are beyond unimpressive. They are very uncomfortable, difficult to make adjustments and too high for my feet but you can't adjust height. So I ordered a p1000i set. R12 was very good but I changed it to R21 just out of curiosity. R21 feels only slightly better than R12. But I at least I have extra capacity in case I need it. I loved the CS V2 wheel. But since it didn't go well with F1 games I got an FSR F1 wheel for them. I loved it too. Moza products are better priced than Simagic while having similar quality and performance. The quality of the CRP pedal set is very good too but it's poorly designed.

[@benlabuda3640]

If you’re looking for a more budget setup to see if you will like sim racing here is what I did. Fanatec csl dd ready to race bundle with the base pedals and steering wheel - $400 Wood rig - $70 Miata seat - $60 Old tv - Free This is what I would start with because if you do like sim racing (you probably will) you will be glad you bought a direct drive. Although it doesn’t come with clutch and shifter you can make that upgrade for < $100 I bought the fanatec csl dd clutch kit and the muge Amazon shifter

[@kasper_429]

3:13 Putting an Alpine sticker/faceplate on a McLaren wheel feels like it should be illegal 🤣🤣🤣🤣.

[@markdresslar]

I may be late, but this is the first time I've seen this guy's face...always knew he looked like a GigaChad tho 😎

[@nobbitous9394]

Agreed

[@v0id458]

same

[@dohctorclark]

Me too. I know he’s a student but he’s younger looking than I would’ve expected. The production level of his content stands among the best of the best in the sim racing community so it’s on me and my old ass for assuming such high quality content came from someone older.

[@stormgear896]

me five

[@Cavi587]

This is a very niche scenario, but if you're gaming on Linux, the CSL DD has community drivers that work really well, I am currently using these drivers as I fully switched to Linux. I used my CSL DD on a dual booted Windows a few months ago so I can compare, and it feels exactly the same with community drivers on Linux. As far as direct drive wheels go, I think Moza doesn't really work under Linux so if that's your use case, consider going with the CSL DD. ACC works well, I am having fun on LFM with it on Linux. AMS2 works great as well, so does rFactor 2. iRacing TECHNICALLY can work well, but the anticheat blocks the ability to play iRacing. I will be trying to reach out to the team as recently they switched to a new AC and for like a week it was possible to run iRacing on Linux but they patched something and now it kicks you as soon as you join a session.

[@smallbutdeadly931]

I've used the Moza HGP before, and it was nothing but issues. It would need constant re-calibrating due to going from neutral into 4th gear not working, and constantly losing it's place where shifting into 1st gear would put you in 3rd gear. I heard that fanatec's shifter has the same issue. Simagic' H-shifter, on the other hand, has worked perfectly fine since I got it. If you want a more reliable H-shifter that won't need constant fixing, go for that instead. Its more than double the price of Moza but 100% worth it.

[@richmondneo1]

huh.... i actually had this same issue with my old logitech g29 shifter annoyed me so much i just bought a generic shifter interesting to know it happened on a moza HGP shifter

[@JDubST]

Eh... I purchased my Fanatec shifter back in November for a steal of a deal thanks to Black Friday and been using it since it was delivered in early December. Haven't had any issues with it after 7 months. Granted, I don't slam my gears as I'm sure those with issues probably do.

[@toyingjohnny7680]

@oc Racing ty for the video touched base on alot of different things i have been wondering about its nice to see all the different set ups that are out there keep up the good work

[@TheBriGuy129]

Perfect timing, I just bought a cockpit and seat but haven’t bought any tech yet, I’m about to donate my G920 setup to a buddy and go direct drive/load cell. I have a NLR F-GT Elite 160 as it was on sale for the same price as a normal Elite

[@joseninjaassassin]

I went with fanatec dd pro for gt7 and all in with fanatec shifter fanatec handbrake v3 padels and the csl p1 v2 wheel. I'm really having a blast with this new hobby for me

[@markdresslar]

I respect this guy's opinion immensely, but I have to disagree on the wheelbase. If you can afford the extra cash spend it here and go with the alpha mini. He says it's no much of an upgrade but with the 5-pole servo motor and higher bit rate encoder I genuinely think it's more than worth the ~$100

[@OCRacing]

Hey I appreciate it. Looking at the specs the Alpha mini is better, as you mentioned. However, I’ve found that in-game, apart from feeling a bit more powerful at its highest FFB setting, the detail and overall feedback is very very similar. To some, that added torque may be worth the extra price and that’s totally fair. However, when you also take into account that simagic’s wheels are also (for the most part) more expensive than most of Fanatec’s or Moza’s, it begins to turn the tables a bit. Furthermore, Fanatec has integrated Xbox compatibility on many wheels thus allowing the CSL DD to work on that console and Moza is beginning to do the same - two other factors I took into consideration and thus came up with my final recommendation. At the end of the day though, all three are excellent.

[@gabrielbumanglag3303]

I'd say these options are still NOT ENTRY LEVEL IMO and NOT for those who want to start out with sim racing (this is so out-of-touch to an average) but rather just for those who have decided to drop themselves into the rabbit hole. Depending on where you are, these are NOT AFFORDABLE and not everyone have deep pockets for these options. A used G29 or T300 should suffice.

[@bm373]

I'm just starting and this video is incredible. I'm on $1500 budget. There's way too many under $500 full setup crap.

[@lamarreaves9732]

Great video to help me get started! Thanks for posting!

[@NotMyName-q2v]

Fantastic content bro! thanks , great edit as well!

[@Team_SpaceX]

Let’s goo new vid Good vid oc!

[@OCRacing]

Thanks 🐐

[@ninjachicken22]

As a Fanatec user, I'd personally recommend staying away from the P1 V2 as the material on it feels very cheap since it's made out of rubber of some kind, I put nearly 200hrs into it before I noticed even a minimal amount of wear so it is sturdy. However, if you'd like a wheel that you'll actually enjoy driving with then I'd recommend the Clubsport Steering Wheel RS. It is $300 so a little over twice as much as the P1, however you will easily enjoy it more and get more use out of it

[@digglerdiggler]

Running the Fanatec CSL ready to race set with LC and an aftermarket Aliexress 8nm brick. SHH Thorn Shifter, Simjack E-brake and just bought the McLaren V2 as an additional wheel. Couldn't be happier with this combo 😊

[@OCRacing]

Glad to hear! How has the aliexpress boost kit worked out? I’ve always been so curious about that

[@digglerdiggler]

@@OCRacing using the ali boostkit for about 7 month now, absolutely no issues. Comparing the cost to the og fanatec, I really think it's a no brainer to recommend it for about 1/5 of the price.

[@psballent]

Hey, my old plywood rig made the video (7:03)! Great recommendations. It's worth it in the long run to spend a bit more up front then upgrading later. I'm on my third wheelbase, third wheel rim, and third set of pedals. I'm currently running a Fanatec CSL DD, Clubsport RS wheel, Aseteck Forte pedals, Moza shifter, and Simlab EVO rig. I'm pretty happy with my setup, don't forsee any more upgrades for a while.

[@kenbarthSimAV8tor]

I'm happy with my Playseat evolution with T3PA pedals and T 300 base with Ferrari Alcantara My Playseat F1 sim rig the first edition with the F1 rim on T 300 base and TLCM pedals as we'll as the Next Level Racing F-GT for my flight simulator 2020 flying with Honeycomb yoke and throttle quadrant along with Logitech rudder pedals and 3 Logitech flight instrument panels and radio and autopilot panels 😃 Continue to enjoy your channel Stay well eh 🇨🇦 🏁

[@FormulaPika]

Overall, these recommendations are great. I use an R9/ES Steering Wheel on my desk, and I can say that I probably would have put the ES Steering wheel as the pick for MOZA. While the wheel is smaller, you can buy a 12-in wheel mod from the website for $80 dollars, which would total $210, being cheaper than the CS V2P. I also do a lot of formula racing and it also comes with a formula wheel mod so you get a 2 in 1 and don't have to swap out.

[@TrackMonkey327]

Thanks for making this video. I'm planning on piecing together a mid-level sim rig and this is extremely helpful.

[@jonasgn]

Proud to say i subbed in 2021

[@BrixandBlocks]

Really nice video OC❤

[@OCRacing]

Thanks! Glad you enjoyed :)

[@Jonas-b4m]

I got the PXN V12Lite Bundle and bought the Moza Universal Hub and the TSW Wheel when i truck, its amazing that you can combine wheels

[@Jonas-b4m]

Oh and could you please review the Simsonn Pro Pedals? I would love to see your opinion for them! Nice Video i have been subbed since 30k

[@OCRacing]

Awesome to hear

[@nxm_bops]

​@@Jonas-b4msimsonn pro prdals are rlly good i have them!

[@thermgraphics6937]

Super informative video, thank you.

[@OCRacing]

Glad I could help out :)

[@JordanLee-xd3vm]

Have you tried out the SHH shifter? I think it’s better value than anything else, and feels way better to use than any Logitech or thrustmaster options.

[@BenDunlop]

100k dude! So awesome to see how far youve come. Well done 👍

[@OCRacing]

Thank you! 🙏

[@atdhemorina3348]

fantastic video!!! building a rig based on your recommendations

[@itspaysenfpv5634]

I pulled the trigger on the bmw csl dd kit a day ago glad that was one of your top picks

[@Dooms3etus]

I felt the same, i bought the same kit as you, and also the alurig he recommends, i went with 3x 27" monitors aswell. :) Got everything in house besides the rig, hopefully it comes soon :D

[@1313CHORIZOMAN]

Starter set up. Logitech G920 for about 200 bucks. Once you realize you like racing then go with his recommendations.

[@gazirifad22]

Thank you! very informative

[@OCRacing]

Glad it was helpful!

[@SlowMoe462]

Shocked me with that face reveal. I am sure you must have already done it, but caught me off guard for sure. Pleasure to meet you sir.

[@theweekndxo7438]

From someone who lives in Canada and plays on console (PS5), a tip of advice for other Canadians, you're much better off getting the Logitech G Pro DD wheel instead of the Fanatec ones. While the ecosystem is definitely better, if you're like me and don't really care about having 2-3 different wheels and all the other accessories, then it's perfectly fine. Logitech also said that more offerings are going to be available in the future and the Logitech G Hub software on PC recently got updated with notes that included support for a future ecosystem, so it may be coming soon. The base itself is more powerful than the cheapest Fanatec bundles, even when combined with the Pro Pedals. Fanatec doesn't sell the 5NM version by itself, it forces you to get the more expensive 8NM version if you just want the wheel base, and then you still have to get a rim and pedals. The bundle isn't that great either since the pedals it offers is legitimate dogshit and you WILL most likely upgrade to a load cell anyways. and the MOST important thing is that Logitech has free shipping to Canada. Fanatec is notoriously bad with shipping costs and mis-marking the quantity of what you bought so whenever it reaches Canadian Customs, they make you pay a SHIT TON of duty and taxes on it, raising the price to insane levels.

[@Coyotehello]

So your video suggest the entry point is +/- 2k$ + PC + Monitor or VR. ? I would say it would be nice to have a video about the lowest entry cost set-up worth putting together as in force-feedback wheel, cell brake pedal, simple steering wheel, VR headset. Why VR you say? Immensely cheaper than a 3 monitor setup, much more enjoyable experience, much less real estate needed, Often comes with speakers and microphone, no need for fancy looking gear as you are not seeing them with the VR on.

[@thesoupman2604]

It’s kinda crazy how Moza managed corner and compete with fanatec only within 3 years

[@DragonFlySlayer-wf6ne]

The Chinese always have to chase somebody

[@StephaneCrash]

a really well put together video instant subscriber

[@OCRacing]

Glad to hear! Welcome aboard :)

[@michaelw6277]

I went with the 8nm CSL DD with McLaren GT3 rim and I’m super happy. Sadly I’m still on a desk though.

[@dominic-irl]

Thanks bro I’m learning to upgrade my setup and your help is actually helping me

[@shoden]

I wonder why recommending Fantec hardware hence they're bankrupt and they'll need a lot of time to recover their loses. So go for Moza, Thrustmaster or even logitech imo.

[@_skrzypo]

Good video altogether, but I really feel like you missed a gem with shifters and I'm talking about SHH shifter. In your review from 2 years ago stadard mounting that you were using was really weak, I've got mine with side mount and it is still rock solid. I've got mine for 1,5 hear now and everything is still working exactly as it should with no problem at all. Longetivity and sturdiness of it is really great and I cannot recommend it enough, specially for a price (€109). Easy to customize as well, got Ford gear knob with sleeve on it and it didn't missed a beat.

[@Kuriiios]

Imo if it’s your first setup just go for a second hand Logitech setup, it won’t depreciate much so if you end up not using it as much as you’d think you or if you want to upgrade later, you ll basically not lose any money

[@SrJonAnthony]

T300 rs GT has been going on sale for 299 shipped from amazon. Stay sharp, Drivers.

[@brobean6000]

Picked up a new g29 with pedal and shifters for $260. Learning to drive and not spin out is very rewarding

[@Mancitydiehard]

Oh shit! Oscar showing face in the new vids! Let’s go my guy! Keep up the excellent content!

[@xendex_o7420]

Love the videos ❤ when’s the next sim project setup video??

[@TheEPICskwock]

I think its important to consider yes the simagic alpha mini is more expensive the the moza r9 or the fanatec csl DD, but it also is a more powerful base. The moza r9 has a peak of 9nm, the csl DD is 5 nm or 8 nm with the boost kit, but the simagic alpha mini is 10nm, and thats sustained torque not peak. For the price of $539 to get 10 nm sustained is a good deal. (Also their pedals are some of the best in the business too, you just review the p1000 pedals)

[@OCRacing]

You make a good point, thank you for the insight. Honestly I feel as though you really can’t go wrong with any of those three (R9, CSL DD, Alpha Mini). The performance difference between them is also extremely minimal

[@rogerdiz3520]

Plus the new neo wheel is on par in price with the moza and fanatec wheels you suggested and arguably an upgrade in quality. I love my mini. Sustained would probably work out to around 12 to 13 peak, which is actually significant. Also, with Fanatec, if you want to use a 3rd party wheel and get force feedback, you need to purchase a quick release AND a $150 podium hub, only need a qr with the other 2 products.

[@chrissyboy7047]

Im not sure how much the R9 is in dollars but the difference isnt worth it for an extra nm in the UK. The R9 is much better value here and still an amazing wheel base. Especially for a similar price to something like a thrustmaster for example

[@amoney11]

bought the R3 as soon as Moza re released it, unfortunately a plastic inside the USB port in the Wheel Base and ive been going back and forth with Moza for 2 months on trying to get a fix. It took them a month to send me a new motherboard and even sent me a video on how to replace it. Problem was that the wheel base they used to show me how to switch out the motherboard in the wheel base was completely different to the R3 and did not tell me i needed wire soldering tools. So now we opted to send me a shipping label to send back my bundle and when they receive it they'll send me a new R3 bundle. I genuinely have no words, i thought customer service wasn't that bad at Moza but the really slow email replies and that whole wrong wheel base being used to show me how to replace a motherboard thing was just annoying. In the video they sent it as all just unscrew the old and screw back on the new. But there was a gold peice in the R3 that was NOT in the video they sent and it was a grey peice. said peice was keeping me from completing the switch. Im getting tired of this I just want to use my wheel lol

[@FelipeWoltmann]

Try buying this in other country. All of this in Brazil has very high price. This setup would cost around R$6.000,00 and our minimun national wage is R$1.400,00 month

[@ThieoKok]

I would tater ga with a much cheaper direct drive wheelbase like the moza r3(400$) R5(580$) csl dd(500$) all inclusie pedals and a wheel

[@ryzonerror5934]

I see many people talking about this video not being budget friendly so I would like to do my own take on this, yes, this video shares many products that are expensive and for many people starting out, it might seem that it is just stupid to spend this much money trying something new. But like he said in the beginning, this is his own personal list. As someone who started on a g29 and worked my way up to a fantec 8nm wheel, i can see why he would say to go right to a expensive fanatec wheel, the g29 I started on is around 250 dollars with discounts. This wheel is ok but nothing like real simracing, yes a g29 can give you a great starting point and you can be very fast on a g29, just a higher NM wheel feels more realistic and different, also the g29 being made of plastic and a very small wheel doesnt help... Also the fanatec csl dd 5 nm can be upgraded with a powercord on amazon for 55 bucks to the 8nm version and also the ready to race bundle gets you a great deal for a direct drive base, wheel and pedals for 400 ish. And yes, he talks about many other expensive add-ons like a shifter or a cockpit, but depending on what driving you do, I never use a shifter unless im drifting or rally driving, and i built a cockpit with a bunch of 2x4's and a beach chair. This hobby might not be for everyone, I personally love it because I love cars and its a way to race cars without spending hundreds of thousands of dollars. I would say don't buy if you dont like racing or cars but if you watch some sort of racing or know cars somewhat go for it, also the 2nt market is strong for wheels, so if you use it once and never use it again, sell it.

[@dennismart5422]

Can we mix and match ? Or should they be used in the same ecosystem?

[@mrfuturre]

Thoughts on the vnm shifter? Personally like it over the three choices you said.

[@stefanandreas1112]

I would love a part for the sim software you are using.

[@Dask00]

New to the Sim racing community and unsure about compatibility. For example can I use a Fanatec pedals with a wheel base and wheel of another brand or does it all have to be from the one brand? Any insight would be much appreciated.

[@SimonDeCoen]

keep up the good content OC!

[@OCRacing]

Thanks Simon, more to come :)

[@kuma_score7536]

this is the perfect video since I'm currently saving up money to build my first sim rig in a month or two.

[@Pole_Position_Sim_Racing]

Perfect timing was just about to look to add something to the rig

[@OCRacing]

You know I got you 😉

[@lyronlax]

im thinking about buying a used t300 thrustmaster as my first ever wheel should i get something else or is it good ive used my friends setup which he has a logitech g923

[@MyRandomContent7]

Just get a g29, Logitech pedals, and the logi shifter. If u like it slowly upgrade to thrust master then moza or fanatec.

[@shutupsethlampton]

Handbrake alone for 200 lol. You can buy a second hand logitech g29 for that price with the h shifter and pedals to go with. Anyone who wants to try sim racing should just go with a g29. It is by far the best value package and will service you well for any sort of driving: track, rally or street racing. If this is just a hobby to you then the g29 is all you'll ever need.

[@jauhis_]

idk why people obsess over the g29. Something like Thrustmaster t150 pro is far better than a g29, due to being belt driven instead of gears.

[@shutupsethlampton]

@@jauhis_ yeah, my point is not to get the g29 my point is that following this videos advice is awful and something like a g29 or thrustmaster will serve you wsll

[@vjollila96]

about the fanatec shifter i have seen ton of reports of it breaking down so I probably would go with simagic one. Im personally rocking csl dd (8nm) with cs formula 2.5 and cs bmw gt2 wheels, aiologs handbrake, th8a shifter (next upgrade), heusinkveld sprints and simlabs gt1 evo cockpit

[@viakruzis]

Moza handbrake is top notch, best bang for the buck for sure

[@jg7702]

I started with Logitech G29 with Logitech Playseat. If i continue doing sim racingvdown the road i will do a upgrade. These options he talks about is not a good choice for people getting into simvracing and or on console. Moza and PxG dont support ps5 and barely support xbox. Im glad he said his opinion.

[@Hustler9g]

For everyone freaking out about the total price i hate to tell you but the best bang for buck in sim racing is really around the 500 dollar mark. You can go cheaper for sure but its still going to be a few hundred dollars and there is real benefits to going up to that 500~ mark aka direct drive with real torque and a load cell brake. Id start by looking on marketplace and try and find a deal but a lot of this stuff is solid and holds its value. If you arent sure you are going to be that into it get a used logitec but just remember buy once cry once.

[@luttufu9292]

Looking into this cus I don’t wanna get anymore tickets thinking I’m a racecar driver in the back roads 😂

[@vitodiomede79]

Hi mate thank you for your video. I'm a fanatec customer, I use a csl dd 8nm with csl load cell pedals set and mclaren v3 steering wheel. I'd like to upgrade my base to the cs dd+, i'd like to upgrade my pedals set and steering whell too but I wish to see a new high-end pedals set and a new gt3 steering wheel, the 27 cm diameter of the v2.5 is little for me!

[@notyou2935]

I'd go Alpha Mini with a GT Neo over Fanatec or Moza. As for pedals, I'd pick the Simforge Mark 1 although the Cammus look interesting at that price point. The Fanatec ready2race McLaren bundle is probably a good starter, I'd still rather see people save a little more and get better equipment to start. Good choices on cockpits.

[@Marc0Bece]

can you mix and match components? Like steering wheel from company A, pedals from company F, shifter from company B, and so on?

[@OCRacing]

Usually on PC, with the general exception of steering wheel A from wheelbase B, yes. On console, no - you must use all from the same manufacturer who is offering Xbox or PS support

[@guidofoc7057]

CSL DD 8nm + Mclaren GT3 v2 + Clubsport RS wheels. Been having these for 3 years now, don't feel I need anything else.

[@OCRacing]

Very solid setup. What did you go with for the pedals?

[@FarCry164]

Yeah, FANATEC takes forever to show up. Customer service takes two days or more to respond. Ordered FANATEC, never showed, tried to cancel, they said they couldn't because it shipped. Magically received tracking number next day. Refused the delivery and I am currently in month two of fighting for my money back. Went on a site out of California, ordered Moza, had it in two days. No issues.

[@jackkerouac3420]

Fanatec parent company filing for bankruptcy. Looks like you dodged a bullet!

[@TheNpcNoob]

Not openly displaying prices while recommending a product over another is a predatory tactic.

[@sebulbathx]

What is the minimum recommendation for NM for the wheelbase? I guess the higher the better but where is the minimum that still gives you a realistic feel, force feedback or whatever.

[@kimisebas9021]

could you maybe start a series with multiple budget to show best for the price for example $1000,$1500 etc until like 3--5k even maybe, and then show wheelbase rim pedals and rig(maybe even other accessoires ?

[@RacingJDB17]

Claim your super early ticket

[@OCRacing]

I think there’s an imposter…

[@maxcar95]

Here

[@TacoR6]

Here

[@Lare_6000]

Here

[@maxthecooldude4873]

Is those super early im 4 hours after the video?

[@Josh-c7k]

I think this vid is perfect 👍 i plan on spending atleast 5k on my first rig

[@Alive_AF]

moza r5 bundle , moza shifter , done deal. Under 800 dollars and the clutch for 40 bucks ofc

[@jcadvanced]

whoa, your face again?!?🤣 Keep up with the high quality content OC.

[@OCRacing]

Might as well, makes editing slightly easier 🤣

[@salashka0102]

one of the best natural body builders

[@ransomsdp]

Best wheel for PS5?

[@OCRacing]

For the money, Fanatec GT DD Pro. The best regardless of budget? ClubSport DD+

[@TheLastZesty]

Thrustmaster sf1000 racing wheel paired with the thrustmaster t300 wheel base and any thrustmaster pedals, assuming you budget in in the $1000 mark.

[@ransomsdp]

@@TheLastZestywill any pedals work on the t300 base

[@javianbrown8627]

I notice a lot of reviews mention how things look which I'm sure some people care about but most shopping at lower price points like me probably don't care about looks especially for things you don't really see like the pedals but I guess it could be important for streamers/content creators. I just know that companies listen to reviews and such and sometimes they focus on the wrong thing when trying to create a new product or improve an existing one. Would be a shame if they sacrifice a bit of efficiency in order to make something look nicer or raise the price point. Note: i know this matters to some I'm just not among them

[@JuppeD]

For me Now me and my dad own a SIM rig and we have a T300RS and the rest is fanatec. And I will say that what ever you do or want… never and I mean NEVER buy logitech SIM stuff brand new unless its like the shifter. Because its not worth it. I suggest you get it used so you know if you like it or not and then you can upgrade to like fanatec or moza on the budget side. I suggest either starting with thrustmaster or completly skipping it. Because when we got the T300RS right after fanatec made their budget Bundle where you get like a wheel, pedals and the dd motor which is pretty amaizing and I suggest that. And I can say that direct drive wheels are absolutely amaizing and being able to get a dd setup for like ≈500€? Is pretty insane. So Yeah I suggest getting something super cheap that has force Feedback and then upgrading to better stuff.

[@starcups8522]

missing the simjack and simsonn pedal options, would be interesting to see a review of those as they seem unbeatable in their pricerange

[@0-60STYLE]

Glad you started appearing in the videos dude

[@OCRacing]

Might as well right? 🤣

[@Paolo-t2z]

I have a big test tomorrow but when OC Racing posted you just have to watch.😂😂😂

[@OCRacing]

School is definitely more important than oc racing but I appreciate your support 😂😂

[@Peysohh_]

Holy shit im early (btw congrats on 100k g)

[@OCRacing]

Thank you legend 🤝

[@luizfmartins4182]

Way too expensive for half a world, dude. Makes the audience think that a one needs nasa tech to perform good in races and that's not necessarily true.

[@xproqressivxyt3648]

Of you had the Choice between the NLR Gt Racer and NLR F-Gt with a moza r12 wheelbase what would be your Cockpit Choice?

[@DDD-nv8oc]

How much is the most expensive sim racing setup you’ve seen?

[@SamuelMusil]

6:43 good shoes