371 hours: Changing oil, spark plugs, air filter, fuel filter, adding in a fuel shut-off switch, cleaning deck and replacing blades. Deck is in perfect shape 5 years old. What is a magneto?
Пікірлер: 39
@bigsonslawncare Жыл бұрын
I totally agree with your statement about taking care of your own equipment. When I started lawncare I knew absolutely nothing about maintenance over the years I've tried to tackle just about anything lawnmower related some failures and many more successes. Enjoyed the video💯👍🏾
@jakeleatherman76542 жыл бұрын
Thanks for the video. Have the same mower and doing the maintenance on it tomorrow. Very helpful refresher.
@Ron_Masterjohn Жыл бұрын
❤🐕❤ Precious Beautiful Puppy ❤ I love ‘em all ❤
@BrianModawell3 ай бұрын
Excellent video. Thanks!! This is exactly what I needed to know to get started!
@shall546 ай бұрын
I use a blower and blow the grass, etc off the deck everytime I mow. I also put green goop in the wheels to prevent flats. Works great.
@countrylivingwiththewades87846 ай бұрын
I have a friend who has a lawn service. He blows his too. I tested foam in one tire that was leaking and the green stuff in the other.
@dirtydish66426 ай бұрын
If you're still running that thing, I'd suggest swapping the front tires with airless flat free tires. As for the back one, if that still leaks, try adding some green Slime. Did that for mine and only ever have to top off the rear tires after winter lay up.
@countrylivingwiththewades87846 ай бұрын
I put the green slime stuff in the second back tire. I have to top it off about every other week. The first back tire holds up well
@danielpadgett28312 жыл бұрын
Got the same mower holds 2 quarts exactly man that mower looks like been left outside for a long time.
@countrylivingwiththewades87842 жыл бұрын
It's 6 years old and never had a bath before. Cuts 4 acres every time.
@tjlimitless75612 жыл бұрын
Thank you for the good, down to earth refresher. Getting ready to do my annual on the same mower. One question I had that I thought I checked before but not 100% on: Do these spindles need greased? Or are they the internally sealed kind? Was thinking they had no place to grease them if I remembered correctly? Thanks, again!
@WadeCountryLiving2 жыл бұрын
Spindle bearings are sealed bearings and do not require grease. Front wheel spindles need greasing.
@patrickwade30713 күн бұрын
Thanks for info… I am trying to lubricate all fittings but can’t locate. Please help
@CaraHillVoiceoverArtist5 ай бұрын
Great video! How doee the deck pully spring hook in? I forgot to look before it fell off. Thanks! :)
@sallyknutson65953 ай бұрын
I am wondering about all the places that should be greased/lubricated. The manual is not great. Would you make a quick video on that, please?
@countrylivingwiththewades87843 ай бұрын
@@sallyknutson6595 There aren't many places to be greased, the front wheel spindles. On the deck, I think all the bearings are sealed, not needing greasing. It's time to do maintenance again. I'll video that and verify the grease points.
@davidruiz53832 жыл бұрын
Have same mower as you but 50” deck, I change spark plugs, oil, fuel and gas filters but when cracking its not starting quickly. Any advise. Thanks
@countrylivingwiththewades87842 жыл бұрын
If you have the same setup, yours will have a fuel pump that normally requires the choke to be fully engaged to start quickly.
@tjlimitless75612 жыл бұрын
I had the same problem until I adjusted the cable going to my choke/throttle. I found a video on it somewhere and 5 minutes later mine has started perfect ever since! It needed tightened because when I moved lever up to choke it wasnt.
@1927Scavengers2 жыл бұрын
I just bought the exact mower. $250. 140 hours. I replaced the battery and she fired right up. Only issue is white smoke from the exhaust. It was getting late so couldn’t let it run. But will tomorrow. Great video on the maintenance. Any ideas. ???
@countrylivingwiththewades87842 жыл бұрын
I would think that is something with the fuel.
@a.j.rainey30248 ай бұрын
Suggest replace as much hydraulic fluid as possible. My unit Approx 80 hours and hydraulic fluid was black. Had to suck out old fluid and replace with same amount with new. Seems like control had better response.
@countrylivingwiththewades87848 ай бұрын
Food for thought. Oils break down with heat, motor oils, transmission oils, coolant oils, etc. All of these oils have additives to resist heat breakdown, to resist oxidation (rust inhibitors), and so forth. I have worked with very large chillers and compressors where we would take oil samples every 3 months or 6 months and send the samples out to be analyzed. Question: did you by chance pass your black fluid through a paint strainer? Metal wear should show up as tiny particles in the filter. That would indicate gear unusual gear wear. Maybe I should sample mine.
@a.j.rainey30248 ай бұрын
Country Living: I was able to pull most of the hydraulic oil out using a small hand pump.via the Allen fill plug. It was “black & nasty” looking. No reason to sample, I just replaced amount removed with new oil. Plan on doing this with annual maintenance. Once again “Great Video”!
@ChillinwithCav3 ай бұрын
so wanted to see the deck and belt put back on..
@countrylivingwiththewades87843 ай бұрын
@@ChillinwithCav I put a 2x4 under the back end of the deck to hook it up then connect the front rod. Then I can just pull the belt back over the edge of the drive pulley and rotate it while holding the belt in place.
@shall546 ай бұрын
It's also easier to use an impact wrench when replacing blades
@countrylivingwiththewades87846 ай бұрын
You got that right
@nated7884 ай бұрын
What size is the drive belt ?
@yarrlegap69406 ай бұрын
good video ... thanks.
@renocheyennecash5 ай бұрын
I can't figure out why you wouldn't clean your machine before you started to service it.
@billleist4227Ай бұрын
do you keep it outside?
@countrylivingwiththewades8784Ай бұрын
@@billleist4227 I keep it under the shed on the side of the shop. But I now have 6 acres to keep cut. It's a workhorse.
@scottrussell96486 ай бұрын
Appreciate the video. But if you had checked your manual, you would have known that it takes a full two quarts of oil.
@countrylivingwiththewades87846 ай бұрын
Yep. I was lazy.
@tazerface96302 жыл бұрын
You did not blow out your cylinder fins and it may run hot if you do not do this.
@countrylivingwiththewades87842 жыл бұрын
Good Point
@renalshomlmes3382 жыл бұрын
That has to be the worst idea possible for disposing of old oil. If you can't dispose of it properly, don't do the job. Pour in the new oil, dump old oil into the now empty containers and return them to the auto parts store where you bought your oil to recycle. It's not that hard. Don't be lazy.
@countrylivingwiththewades87842 жыл бұрын
You are correct. There are ways to properly dispose of used oil to be recycled. I will do that. Thank you.