Cube ITX PC Build ASMR | JONSBO C6-ITX

[@PC_SNAP]

Oh, you're back! I missed you, bro👍

[@Mr905Sal]

Welcome back 🤗 and nice built 👍

[@HONEESHONEE]

존스보가 ITX부문에서 다양한 제품을 제일 많이 출시하는듯한 느낌이 드네요. 비교하기 좋아서 좋습니다!

[@freeklee3053]

So Damm clean man

[@ayunnajhan9047]

s300 build next please

[@dopedrums]

When you're a musician and crave that guitar amp look

[@user-cy-wu]

It seems like JONSBO did a version-up on C6, which made its airflow more reasonable. As far as I remember, if you build a rig with C6, PSU must be installed at a parallel position to motherboard, and cooler can only be used with ≤75mm. C6-ITX can no more be compatible with MATX board, but I think it's a good change of design.

[@amirtakhtanov3088]

Can someone advise, how much would it cost to assemble this build? Looks neat!

[@kennethlee1977]

are you using an ATX PSU? i ddnt know it would fit in this C6 ITX. have a C6 non ITX, wish i had went with this instead.

[@mws02]

@@kennethlee1977 this case can fit both sfx and atx psu. The difference between both of them is the psu is installed on the side ( c6 atx ) meanwhile , the psu is installed on the front for this case ( c6 itx ). Already checked the description of this chassis

[@DalraeMyo]

The PSU I used in the video is a standard ATX size. C6-ITX supports ATX standard PSU installation with a length of 140mm or less.

[@IamJai.87]

Can I put 120mm Liquid cooler in it?

[@whateverbefore]

Nice one. I always wanted to build in a Mini-ITX. But no decent GPU will fit in it these days.

[@tbuddy3005]

Just ordered the white version of this along with an Asus ITX board. I have all the other parts with the exception of the CPU cooler and the fans but I wanted to put my peepers on it to see what my options are. I have a Ryzen 5800X 32GB of DDR4 ram and a 1660 Super that should fit in there with no problem. I have a 600W PSU but its not modular so we will see. From all of the videos I've seen it looks like a solid little box. Every one says no room for liquid cooling why not where the rear 120mm fan is mounted?

[@DalraeMyo]

A 120mm cooling fan can be installed on the rear. However, in the case of a 120mm AIO, you must consider the size of the radiator, which requires more space above and below. Also, even if it can be installed, it cannot be said to have better performance than a typical dual tower CPU cooler. When installing a 120mm rear cooling fan, it can move up and down slightly, but I remember it not having enough room to install a typical 120mm AIO radiator.

[@jevilreal8793]

Hi, im planning to do my first bulid in this case, i would likevto ask a question. What should i pay attentiinbto get exept the main parts? Also should I find some specificly modiefied parts?

[@DalraeMyo]

Choose a PSU that is provided as a modular type rather than an integrated cable. It will be easier to build a PC if you secure as much internal space as possible.

[@jevilreal8793]

Thanks alot foe the tip

[@theshakyproject2971]

Was that a COPPER contact frame!? I didn't even know those existed! I want one! :)

[@DalraeMyo]

This is a thermal paste guard. Some people seem to say this helps with CPU temperature control, but I didn't feel much difference.

[@theshakyproject2971]

@@DalraeMyo Yeah, I looked it up. So far, they only make copper ones for AM5 CPUs.

[@charaznable7080]

오랜만이네요 영상 잘보고 갑니다

[@sweeleangloh]

Loong time no see! Hope all is well😇

[@ctrlaltpower]

Are there still spaces for 2 SATA SSDs? I wonder if you could mount 2 SATA SSDs with that parts placement.

[@DalraeMyo]

One 2.5-inch drive or 3.5-inch drive can be installed next to the bottom cooling fan mounting space. In the case of SATA SSDs, the volume is small, so I think you can install two SATA SSDs by first installing them next to the bottom fan and installing them on top of each other with double-sided tape. (However, organizing the PSU cable will become more difficult.)

[@BasementBear]

The build is great, but that floppy handle brings down the overall impression of the whole case. Can always make your own handle though

[@eukaliptal]

I like the handle, its practical

[@manread1701]

존스보거가 보따리 제품중 제일 다양하고 퀄리티 있는거같

[@moritalex]

ITX & M-ATX case

[@Roux-yg1rs]

A good question can you fit a 120mm aio on the top?

[@DalraeMyo]

It looks difficult. If the cooling fan exceeds the thickness, it will interfere with the motherboard's memory slot.

[@mdnormatnor5226]

where you buy the cpu holder (anti-bending)

[@DalraeMyo]

Search Google for DEEPCOOL AM5 Thermal Paste Guard.

[@johsttincurahua5505]

Thanks for the video, one question is the handler included in the case?

[@DalraeMyo]

Velcro tie handles are included in the basic package.

[@arifnurabidin2509]

@DalraeMyo can i ask you please Im planning buy this case along with my Matx motherboard My question is, in other video of this case, is about PSU position, i want like your position, so i can mount larger cpu cooler But in other video psu position is front of motherboard , automatically it blocking to get larger cpu cooler Is there two position of psu placement or what???

[@dr_ricardo]

@@arifnurabidin2509 the one in the video is the new version and only ITX compatible. The original case could fit both M-ATX and ATX PSU. If you have the normal C6, you could try to use the front brackets to mount PSU in the front but it's gonna be very tight for GPU and wiring later on.

[@uqeey]

s400 v2 with bulky graphic card build please

[@joshmarvz]

looks like a different c6.. can it still be installes with ssds?

[@DalraeMyo]

Unlike the regular c6 model, it is a separate model called c6-itx. It has a smaller size. A 2.5-inch SSD can be installed.

[@scubacode41]

nice build, can you tell me what is the model of wifi antenna ? i want those.

[@DalraeMyo]

I don't know the exact model name either. Search Google for RHCP Antenna and you'll find the antenna you're looking for.

[@itxbuilds]

What model are those low-profile Wi-Fi antennas?

[@DalraeMyo]

I don't know the exact model name either. Search Google for RHCP Antenna and you'll find the antenna you're looking for.

[@2sump]

오랜만이네요. 반갑습니다

[@Kucinghitam35]

Hai mate , is this case have bracket for sfx psu?

[@DalraeMyo]

SFX power supply is also available for this PC case. There is also a hole in the bracket provided that meets the SFX standard.

[@wind_06]

혹시 m-atx로 간다면 쿨러 못달는곳이 있나요?

[@DalraeMyo]

존스보 c6-itx와 c6는 별개의 모델입니다. c6 (mATX)모델의 경우 후면 쿨링팬의 장착 규격이 다른걸로 알고있습니다. 이부분을 확인해보시는게 좋을것 같습니다.

[@wind_06]

@@DalraeMyo 아 그렇군요 감사합니다

[@Lawchibi]

will the msi twin 4070 ti super and assassin 4s fit in this case?

[@DalraeMyo]

Unfortunately, the size of the graphic card you mentioned is difficult to mount on the C6-ITX. On the other hand, CPU coolers are compatible up to 170mm in height. (The DEEPCOOL ASSASSIN 4S is a cooler with a height of 164mm.)

[@whateverbefore]

Nope. Jonsbo C6-ITX Black manual says max. 255mm. Your GPU is 310mm long.

[@elcamino6699]

Looks a little bit like the PSU Cables are pushing down on ghe GPU and they are bent at a pretty rough angle. Probably could be avoided if an SFX PSU instead of an ATX was used.

[@Nihilius87]

Can you please give me a link for this? THX 1:49 6:02

[@DalraeMyo]

1:49 > www.deepcool.com/products/Accessories/ThermalPaste/AM5-Thermal-Paste-Guard/2022/16714.shtml 6:02 > aliexpress.com/item/1005001300354315.html

[@MajorSpam]

I have seen in few reviews that the Deepcool Copper Thermalpaste Guard is lowering CPU temperatures. Is that true?

[@DalraeMyo]

No, just like the name of the product, it only slightly prevents the thermal paste from falling on either side of the CPU heat spreader. There was no significant difference in temperature. I didn't feel it, but I think there might be some improvements in heat dissipation depending on the cooler as there is some gain in heat exchange area.

[@MikeBob2023]

Nice! 👍🏼

[@enot85]

Tell me, I bought myself a c6-itx case, an asrock b650i fantom gaming motherboard. An sfx power supply like yours. 3 arctic 120 fans for exhaust. I won't install a video card yet. The question now is which processor to choose, 7600 or 7600x. Won't they be hot? Maybe I'll lower the TDP then. And what kind of cooler, will it fit with 2 towers or not? Like id cooling 226, ak620 or thermalright fantom spirit. Or which one can you suggest from your experience, thanks in advance😀

[@alpakajon6740]

Would a 120mm AiO fit at the back? if you are targeting a higher TDP cpu then that is your best cooler, the airflow should be intake at the bottom for the GPU, intake at the back for the radiator then exhaust at the top.

[@enot85]

@@alpakajon6740 Thank you, but will a cooling cooler, like the ak620, fit into the case?

[@guardian8373]

if the 7600 is significantly cheaper in your country then go for it, it has better thermal, and when you turn on PBO it can run as fast as the stock 7600x

[@에뜨왈-4]

이게 몇리터짜리죵

[@DalraeMyo]

15.9L입니다.

[@정희원-n9e]

15리터가 넘고 atx 파워라니... 이건 범죄군요

[@briankleinschmidt3664]

I didn't care for the look of it, and I liked less as I watched a master builder struggle with it. The TK-0 seemed a lot nicer.

[@acloudonthebluestsky9687]

i just hear the noise ting ling noise when u build bruh ;( beside of that everything seem good

[@Omil_Jomil]

언제부터 15리타 오버 깡통이 SFF라고 불리게되었지? 흠 광고 ㅇㅈ..

[@stellina4557]

이딴게 15L면 빅첩임;;;;;