This Micro ATX Build Hits Hard... | Jonsbo Z20 Gaming PC Build | Jonsplus MATX + RTX 4070 Super

[@HHMMIICC]

I'm doing my homework to upgrage my 10+ year old pc setup. Your videos are helping me a great deal to plan my build. The aesthetics, smoke and attention to detail have been a learning experience. And this is comming from someone who has been building his own pc cases since 1995. Keep inspiring everyone Matt, you are an artist. Saludos de Monterrey, NL, MX. Gracias!! 😊

[@lamproschouliaras5346]

PC master race student. Salut

[@tarekali4u]

Same here...that's exactly what I'm doing...

[@madarasoun3018]

This is best for people like me who moves gaming PC between living room and bedroom at least more than 10 times a year.

[@andy_warb]

God I love how the rad slides into the top of the case. I wish more case manufacturers did that!

[@jason2x1590]

was wondering if it might rattle though?

[@grahamgrantme]

@@jason2x1590nope, it was locked with screw

[@not_ehvan]

Please do a Lian Li A4-H20 build, I'm planning a new build in it and the last two builds of mine have been exact copies of yours

[@Mr_Matt_Lee]

I’ll see what I can do! I really like that case too 😁

[@utshasen6511]

​@@Mr_Matt_Leeplease do it 🎉 😊

[@robertmajors1737]

I used to have that case. There's really no need for a build video. There's only one configuration you can use. Just make sure your aio and gpu will fit, and you're good.

[@yv5tx]

The ultimate Mini ATX! Need no more! Excellent Configuration! The best of the best!

[@RickyGrove]

One of your very best build videos. Thank you for the care you take in filming and editing. Lovely

[@Sanchez9183]

The precision and professionalism are beyond Earth. I absolutely love the quality. You are inspiring me to make the most of my build/setup.

[@jeevespreston4740]

1st timer, this video is a work of art!!!

[@buriedbits6027]

I hope you have a lot more videos for us in the future because these just keep getting better and they are excellent springboards for learning how to build a PC and on components. Thank you, thank you.

[@NexarNova]

La edición, la música, la limpieza como ordena las cosas. Este canal es perfecto...

[@remyxi]

this form factor is just perfect. Easy to manage and not as expensive as the ITX one.

[@Jasontyo]

So glad to see mATX getting some love, I still hate front power supply locations but this case put in some attention to make it slightly less bad. The PSU still looks crooked and id much prefer a floor or ceiling mounted psu.

[@LCJammer]

wish they had a vented side panel instead of the tg. love the top hangle but i went with the lian li a3 case.

[@karljuliuz]

​@@LCJammeryou can just switch the back mesh panel with the tg though, I think.

[@Gonzie6]

Can't the PSU be mounted higher up? It looks like its taking up potential GPU space. I do like the look of this case but its essentially a more expensive looking version of what I already have.

[@ajjames1960]

i mean this is like ITX case tho its only 20L while ch160 is considered itx but its 19L lol

[@yorkshireplumbing]

Then the case will be taller. I think the future is SFX PSUs. I've been ITX for 10 years but looking to move to mATX due to price, more options and things like 4 RAM slots, but, an SFX PSU is a pretty cool thing when it comes to space and cases.

[@jandkwhite6459]

Dude I'm so glad you did this build...I have this case in white sitting in the garage waiting to buy the rest of the other parts. Great work as usual Mr. Lee!!!!!

[@moonmoon7294]

Probably one of your best videos that I’ve seen. Can tell you’re having fun on this one!

[@shyema17]

Doing research on building my first PC and I absolutely love this

[@saadmazumder4555]

Wow, Iam seeing my previous comment mentioned in this jonsbo z20 build video . Glad for that.

[@MrVoicemailGuy]

Ngl the micro ATX builds are my fave. This build was definitely clean af too👌

[@Elaoofa]

Another nice build. 👍

[@Mr_Matt_Lee]

Thank you :D

[@MrTomo89]

love the clean videos and the still with the parts listed clearly is soo cool and original

[@ribeirinhu]

love mi some small builds, jonsbo have amazing itx cases also it would shorten the build process for sure, but I just like to watch people build on it so I would love you doing it almost 200k man, hope you get there soon!

[@hoijamm]

you catching the screwdriver was the smoothest thing I've ever seen. ❤😮

[@Tekuzumodoto]

Just letting you know I appreciate the creativity with the screwdriver flips. 😊

[@marcelocataniantunes1490]

As always a perfect assembly. Congratulations @Mr Matt Lee! I liked Jonsbo's idea of ​​doing the intake from the rear directly into the VRM. In fact, I have a Jonsbo D31 which is very good and beautiful with the front screen. I highly recommend the brand.

[@XOFGREY]

U deserve someone subscribing you,because you are kind in teaching!

[@el_mal_de_ojo]

Legitimately makes me want to build a new PC as soon as possible around this case. It is so damn good.

[@Ayrichu]

Very well produced video, I honestly love the case! When I get around to building a PC in the future, I'm almost certainly going to go with this one. It's just way too good looking!

[@ricks9426]

Greetings from Colombia 😊😊

[@Mr_Matt_Lee]

Greetings back at you from England, UK 🙌

[@chrishexx3360]

Cracking wee build. I just bought that GPU two weeks ago I have been impressed. Bought it for 3 fan cooling at a certain size and it does the job nicely.

[@thejontao]

Have you considered shooting the airflow visualizations in slow motion? Or intercutting slow and normal speed? Not too slow, but slow enough to really see the smoke doing its beautiful, natural thing.

[@zzzBatsnCats]

THANKS. I love this build and i been waiting for you to do it 😊

[@teddyd8157]

6:04 right on beat 👍🏻

[@buriedbits6027]

The paint finish on this case is really luxurious looking.

[@RodimusPrime29]

A sensational build as always!

[@cartmaneric1008]

great video well made

[@molvigamer3142]

Thank you so much sir. You always care about your audience....❤❤❤❤❤

[@wozzielfc401]

Bro this would be my build . I love everything about it . Dont know why 😅😅😅😅 but man the way you just build it and the music . Calming !!!

[@apricanephoto]

Hello from Canterbury - watching this from the UK this week :) I salute the skill involved in building an mATX rig in something so small. I just switched my gaming HTPC to a Lian Li Dan A3, and that is as small as I can go hehe.

[@georgmartin_]

I was hoping i'd see this case in a video someday. Next i would request a build in the COOJ Z18, that would be awesome! Keep up the good work!

[@samdefoe1043]

👌🏻 that smoke machine tho .. always coming in clutch

[@Tunbalisongs]

This pc building video is super chill

[@Thank_Me_Later]

Full PC components one side and the looks of the case is on another side ❤

[@adinfinitum000]

Artist work in all aspects, not just pc building. Thank you sir.

[@itzamedave6242]

Stopped in for my daily dose of art ❤

[@noumenom1345]

Ааа наконец-то этот корпус) Хоть он и толстоват (24 литра объёма), но я все равно считаю его лучшим компактным решением для бюджетных сборок потому, что с установкой дешевых мАТХ материнских плат и АТХ блоков питания не возникает никаких проблем)

[@noumenom1345]

@ololometer536 Ты совсем дурак?)

[@link2jr]

7:19 Criminally underrated

[@ducvu2822]

You should make an air cooler build with this case, I think it will look great

[@x3ko777]

I have this case in white and applied a dark window tint so you cant see inside until the rgb turns on. Have been waiting for you to do this case just to see how you orient the fans and see the smoke test, was so happy to see you configure it the same way as me, i feel validated now 😂. Love your builds

[@PilotLiberman]

Best Build on YT

[@rklaus7732]

The video is an artwork itself ❤

[@nadeenasnake]

You're an absolute artist

[@Me99adon]

Looks sick, love the all black...its simple but still good looking

[@johnmerritt6328]

NICE! You've taken the PC build video to a level worthy of the moniker "Art Form". I am inclined to make this my next build, and am keeping your vid readily available for the future project. Will deviate with an AMD Ryzen...wish me luck and my sincerest gratitudes for your effort.

[@Numbertwo22]

This is like the 50th small matx build vid ive watched in the past 2days for inspiration and ive got to say, this one is the most chill :) But ive noticed, no one uses rubber fan mounts anymore

[@domjones]

Best build Ive ever seen

[@daviddamasceno6063]

Very charming small build! I love my big tower of power, but sometimes I wish it was a little smaller and easier to carry.

[@allengonzalez7693]

Hi Matt, could you do an air cooled build for this case? I think it will look great

[@Mr_Matt_Lee]

I was thinking of building with the black/orange version or the white version for a future build and that would certainly be air cooled :)

[@jozeferdelyi4046]

Great work as always Mr. Matt Lee, got the white z20, maybe next time NCASE M2 😛, love your work so clean 👍

[@toprakbal]

I am waiting Fractal Era 2. Thanks for video Matt

[@BrunoGameChannel]

Awesome video. Very esthetic. Thank you!

[@smuludgn]

Never thought a reverse rear fan would look that good.

[@ryagas5369]

It's good to know I have aesthetic options once rebuild time comes.

[@cheekster777]

Thank you Matt. ☕️

[@nimmy404]

Micro atx comeback is gonna be insane

[@sebastianoolivo9218]

Great job, it's looking awesome! I'd love to see you give the Streacom DA6 build a shot. It’s a bit different from your usual stuff, but the case has endless possibilities, and I’ve seen some amazing builds with it. Super curious to see how you'd approach it!

[@ArtemKarpenko]

This case is awesome. Thx for build.

[@Aly36917]

Leader as alway ❤

[@rhodrik.]

Amazing i just order the case! Is that the best airflow config for the z20?

[@JackGuitar1207]

Matt Please put music titles into the video diescriptions. You are choosing sweet tunes to these montages.

[@rajikkali2381]

Damn, this vid hits hard. Subscribed

[@Thefufuist]

I just built my first pc using this case. No regrets.

[@pronstorestiffi]

Would have been nice if this case offered an offset for itx motherboards. That way it might have been possible to mount a 280mm rad in the top.

[@Robster191919]

What would you recommend - this case or the Lian Li A3?? 👀

[@11stalion]

Mr matt lee your choice?

[@duque_bm]

Jonsbo z20 its little bit tinny than lian li a3

[@WuLord187]

High Quality work

[@mesut7825]

Finally🙏🏻🙏🏻 Thank You! Yes it’s perfect! I’m using this case with Rog Ryujin iii Aio and full of Noctua fans.. (7800x3D RTX4080) Edit: Side mount sfx-l psu is much better for gpu room.

[@Brad-bb7ey]

Favorite by far! amazing build, love it. minus the top handle

[@igginatz]

I love my z20. It is so beautiful❤

[@ShaunBeyleveld]

I would love to see you do a Antec Flux or Flux Pro case. Also, the new Geometric Future Model 5 is the most unique case design I've seen in a minute.

[@bigblack2295]

Mr.Matt you do this job great 👍

[@thoriig3887]

Great Case. Using the Z20 as well with a Noctua U12A and rear intake.❤

[@Mr_Matt_Lee]

Nice! What other supporting hardware are you using and have you found the rear intake with an air cooler to be adequate? We plan to do something similar in the near future :)

[@thoriig3887]

Its a 7800x3d and a 4090 FE. Because the FE Blows hot air up i change the direction of cpu air flow backt to front. GPU only gets fresh air and cpu too. Hot air gets sucked out by 140s noctua. Also mouted the loki on the sideplate instead the Front (with the bulky cage)

[@manuolivares4537]

Doesn't the hot air hitting the psu make it suffer?

[@thoriig3887]

@@manuolivares4537 no. Psu gets fresh air from the front of the case 👍

[@Blinkfyre]

Interesting, I have rear exhaust, rear top fan exhaust, but front top fan intake for air cooler.

[@chrisbullock6477]

Makes me wish FRACTAL did a case like this for the Creator Series.

[@teolcd]

Top-notch filming and editing. A bit pity, it's not AMD.

[@Shawgydog]

Any chance you'll ever look at the SAMA IM01 Pro?👀 I've been wanting to build an all black build in it with the NH-D15 and possibly 3d print some air ducts for maximum cooling

[@SamFisher_90]

Nice job!

[@giosam7721]

Ive been looking to build in either this case or lian li a3. Bro always comes in clutch.

[@Erksah02]

Saw this on Caseking. Pretty neat design.

[@Mr_Matt_Lee]

Agreed! Its hard to get in the UK / Europe at present but very nice design and quality indeed 😊

[@Weeeeeeeeeeeeeah]

You're the best in what you're doing 🎩📴

[@Prinz-Eugen-1946]

Micro ATX and Mini ITX cases are so beautiful; I really want to build one of those. However, I’m a bit worried about temperatures, as I enjoy making 3D animation and sometimes temperatures can get high during the rendering process.

[@kbuster2473]

Great video, I might pivot to building a Micro ATX rather than a ITX build.

[@Mr_Matt_Lee]

Curious to hear our thoughts and performance on this one? Head over to the blog post here -> www.mrmattlee.com/post/jonsboz20

[@ArtemSlash]

Dear Mr Matt Lee, please add temperature in airflow visualization! 🙏

[@richardfarmer6570]

Very nice, love a nice blackout build. I don't usually like mATX cases but I actually like this one. Not much bigger than a CHG160 but a lot better compatibility.

[@ajjames1960]

not alot of bigger since the ch160 is just 19L while this one is 20L

[@antoniom.939]

Love this pc case, but unfortunately is not available here in Spain, nice video and great setup 😉

[@sibes0633]

this is a good looking compact matx case i've been eyeing for a while. it's only 20L. Matt, please check the jonsbo TK-0 (Itx). Would love to see it. As always content qualtiy are top notch.👏👏👏

[@86krzychus]

Matt, maybe you will consider assembling the set in the Jonsbo D300 case.

[@dave_barco]

Is this case viable for air cooling? If so, what an absolute W!

[@johnbernhardtsen3008]

hot stuff! I build my mother a 12600kf with an old rx5500xt in a nice Jonsbo D31 wh and its super silent!still dont have the Z20 case where I bought those parts!

[@firdaus117]

Got this case for my travel pc build, mine is black and pink... Its perfect haha😂

[@khachoang1719]

Good one!

[@Enragedurso]

I had some deja vu with one of the previous builds that looked like a stereo.

[@drmauricio]

He made it 🎉❤

[@Mr_Matt_Lee]

I sure did! You had the final say, too! 🤩