Cummins coolant filter | ISX | Baldwin

[@nunyabuziness8421]

You dont need to remove any bolt. Just turn the valve off

[@ItsMe-xf3dv]

U sure as hell made it tight

[@avinashroopnarine2799]

I changed mine yesterday. 2015 international pro star. Cummins isx15. Took a big hit last week. 6000 turbo and actuator

[@StickNclutch]

Did you ever change the imap and delta p sensor before changing out the turbo? Check out rawze YT channel

[@Ecoscienceczar]

Will this filter cause me to over heat it its bad?

[@thebigboss1839]

So after you replaced the coolant filter it messed up your turbo and actuator?

[@thebigboss1839]

After you changed the coolant filter it messed up the turbo and actuator ?

[@issacespinoza5498]

Why fill up the filter when it will be fill up once you open the valve?

[@StickNclutch]

Somethings for sure when you do the job you want to make sure you do it right the first time...and that's the difference between jiffy lube and you doing it yourself

[@anoop439]

@@StickNclutch 😹😹😹 true that

[@kushcdlinstructor4776]

To avoid air bubbles in the system

[@saidabdulle4592]

Bro if you don't change filter what is going to happen you're truck

[@thebigboss1839]

Please help do I have to remove that little screw next to the valve ?

[@ISLANDTRUCKER]

Yes

[@omarmiranda8818]

What tool do you use to remove the screw about the filter

[@chrisb7493]

You don’t have to remove the screw. Just turn the valve off. That’s just to hold the valve in place.

[@nunyabuziness8421]

No

[@manuelsalgado8510]

What year truck is that?

[@ISLANDTRUCKER]

2009

[@lowprotv5109]

So you don’t need to drain the coolant to change the coolant filter

[@ISLANDTRUCKER]

No just turn off the valve

[@lowprotv5109]

@@ISLANDTRUCKER thanks bro, the valve spins in circles right? All the way to right is off and all the way to left is on?

[@ISLANDTRUCKER]

@@lowprotv5109 correct

[@TruckingWithKimlo]

Question could this filter cause a truck to shoot water out reservoir cap while truck running loosing coolant

[@thebigboss1839]

Is it necessary to change coolant or can I just change the coolant filter and leave the current coolant on truck ? Thanks

[@ISLANDTRUCKER]

You change the filter alone

[@thebigboss1839]

@@ISLANDTRUCKER thanks I appreciate it! No need to worry if air is trapped once I install new filter ?

[@ISLANDTRUCKER]

@@thebigboss1839 put coolant in the filter then install it, it will be good

[@thebigboss1839]

@@ISLANDTRUCKER thanks for the help !

[@chrisb7493]

It’s not necessary to take out the bolt, I did mine with half a spin and it stopped the coolant flow.

[@johnnyprice1487]

Big up

[@sunwaterflowz]

Good job man

[@DirtyBroke215]

👍🏽

[@jmanole6364]

Why are you gonna make a video about doing something that you don’t know how to do?

[@kennethcox5276]

Way, way too tight.