How to SUPER FLUSH your Cars Cooling System

Learn how to flush your cooling system including the radiator, heater core, and engine block. I go though every step to SUPER FLUSH your cooling system completely. My truck's cooling system was really really bad and it needed a good flush. Now the cooling system is filled with brand new coolant and is clean!
If your system is old or dirty, that dirt could be clogging holes in hoses, seals, and gaskets so take that into consideration when you do this.
Spill free funnel I was talking about: amzn.to/2gfZqOn
Black Socket Set I use: amzn.to/2gFpZJP
Hose Clamp Pliers: amzn.to/2gg4ORR
Large Drain Pan: amzn.to/2gFhjTI
Universal Antifreeze: amzn.to/31KM1DA
Quick Flush your Cooling System: • How to Quick Flush You...
Here is How to Test your Cooling System:
• How to Check and Test ...
Here is how to Flush your Heater Core:
• How to Flush a Heater ...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzbin.info_c...
-KZbin Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

[@chrisfix]

Learn how to replace your radiator if your cooling system is too far gone (wont get clean, has a leak, overheating, etc): kzbin.info/www/bejne/g5bVpnSQmsd8m7c

[@TheCUTTERbyPHOENIX]

3 years after, your coolant fluid is pretty much as clean as new ! Impressive ! mine just turn like a 10 years one or after 200.000 Kms ... huh flush it again :/

[@clutchbleach2057]

You have to be one of the only million+ subs that deserve it. Thanks for the great videos!!

[@allthingsmotorized1885]

Funny how I don't have a car I'm in primary school and I act like a kid at Christmas when you upload

[@OutwestTX]

I would like your opinion on how to clean my old amc v8. I found a wagoneer missing the radiator so I removed the water pump and the engine looks filled with congealed radiator fluid and rust. What do you recommend on cleaning that out?

[@pinkmango528]

3 years ago video but still updating it. Youre the man chris

[@zacknguyen06]

this video have been 9 years ago and yet chris still replying people's comments im alive

[@chrisfix]

Absolutely! 4 hours every single day reading and responding to comments!

[@stevencamacho6474]

@@chrisfix holy fresh hell man

[@amoyag9202]

Lol. I appreciate that. 👍🏾💯

[@TechnoRhino]

@@chrisfix Holy shit, earned my sub just on this comment alone.

[@deejayqueazy8251]

@@chrisfix you are a KZbin legend. My boys and myself have utilized several of your videos. Your content has helped millions of people. Thank you for your dedication to great useful content.

[@ryanespinoza7297]

It's 3am, I have to be up in 2 hours, I don't have a vehicle, here I am. Edit: it is November 2022 and I've been performing all my maintenance on my 2016 toyota Rav4 for 3 years now.

[@chrisfix]

But when you do get a car, you will be able to fix it in no time and gain back some of that time!

[@lonewolf2156]

ChrisFix I watch videos like this from multiple KZbinrs it's why I've done the work I've done already including one very big job on my rear axle, pinion bearing blew up so I had to replace the axle, did not want to mess with the gears in the existing axle

[@katchuitan8278]

Tony Tan

[@colincoyle4325]

You have no idea how much I relate to this.

[@hamsterhoudini1623]

I know! XD

[@josephgarcia3767]

I’m working on my first radiator flush. Thank you for the awesome video tutorials. They’re well made and the explanation of each step is very thoughtful.

[@kelligallicchio325]

Take your time Joseph and you will save money on labor costs and maybe this will be your calling but you maybe able to do a video on your engine repair as well....✌️

[@entech2619]

The way Chris does his work and maintains his vehicles, I bet every one of them will last longer than what the vehicle designers' thought was even possible!

[@SantaFebuff]

GM was smart enough to put auto-flush on my coolant system. Every 10-20K miles on my car, a major coolant hose or connector fails draining the coolant automatically to ensure no contaminates can build up. Currently, my car is on the slow-drip flush program. It also attempted to burn the contaminated coolant as well. Wait until you see how I keep the brake fluid so clear...

[@panzerkiller13]

"GM owners need to see this ONE SIMPLE TRICK to keep their coolant like new!"

[@kayannhenry]

SantaFebuff comment is awesome

[@power7785]

@@panzerkiller13 "MECHANICS HATE THIS"

[@chonghwang8028]

I know what you mean. My Toyota is poor mans car. Hasn’t had that luxury system. I’m going to plush cooling system it’s first time when it reaches 300000miles. I know I can wait until 500000 miles because it’s original coolant look absolutely clear pink but I just want replace it. With all original rubber belts.

[@coozy1337]

This comment made me genuinely laugh and then text it to my friend.

[@TankCatIntoMordor]

Imagine buying a second hand car from this guy. Would be an absolute minter.

[@Viesta]

and stupidly expensive maybe?

[@SpeakerWiggin49]

Well his used car might be quite old and not mint, but you know the parts have been well loved and checked for every flaw.

[@wannawatchu66]

Yeah, probably the only showroom-quality used car you'll ever see or buy.

[@samscamera3456]

@@SpeakerWiggin49 prevventerttave mantnence

[@shanec4441]

I have the same vehicle which helps a lot, Ford Ranger 3 liter

[@Milkinporsche]

It's respectable that Chrisfix, a KZbinr his size, still takes time to read comments and answer questions on old videos.

[@angelamalone8071]

I have been working and customizing my own cars my whole life and I'm now 50 years old showing my kids how to do it. I hate paying someone to do what I can do on my own plus I enjoy it. I love Chris's videos and he is very thourgh and has actually showed me alot of pointers that I haven't ever seen or thought of. I love how much detail you go into and I'm sure it takes you alot of time to video so much detail. Keep it coming Chris Fix you rock and doing a great job. I hope you enjoy making these videos and I'm jealous!!!!

[@loslobos5481]

Chris I’ve been a mechanic for 30 years. I just wanna say you do a great job explaining in your videos and you are very thorough in your work. It gives me hope that their are some good young mechanics out there. Keep them coming even though I might know how to do what your explaining I always feel your never to old to learn something.

[@jamesb1412]

Beautiful and humble comment!

[@sumkneegar2766]

As a 23 year old self taught shade tree mechanic, I can say Chris has helped me a TON on some of the harder jobs ive faced. Definitely my #1 Auto KZbinr.

[@3DPeter]

i have VW 1400 mpi from 2006 and has only 70k miles on it and i change the coolant every 20-25k miles and it still looks pink/orange as from the bottle. even the coolant tank looks white as when it was new, so why doesn't every car manufacturer use that same coolant? Because it works perfect on my old car.

[@ak47gobrrr]

tbh chris teqches good because i flushed my dads cars radiator ty

[@MaddoxMelton]

I’m 16 and Chris has inspired me to become a mechanic. I bought myself a 2002 wrx and just got done doing a full brake job and all new fluids and I learned it all from Chris! Of course I had some minor handy experience but besides that Chris has taught me everything

[@ladygundiva5779]

The look on my boyfriend’s face tomorrow when I tell him I’m going to change the coolant will be priceless.

[@chrisfix]

Haha let me know how that goes!

[@monicamadrid7373]

how did that go??? I did the same and he was at a loose for words

[@kyinchi]

Tell him you’re going to enjoy ratcheting the petcock

[@lizhewes6063]

Mine is used to it LOL.

[@louizivkovic1752]

Make youtube video of it lol

[@NorthPolePenguin1]

The thing I most appreciate about your videos is that you always show how to dispose of chemicals, in this case coolant, but also oils, refrigerant, etc correctly. KZbin is filled with people taking shortcuts; it's so important that we have examples of doing things the right way.

[@A55YRlAN]

Took my vw golf to jiffy lube for a “coolant flush” they did a radiator flush and added the universal coolant which mixed with my G13 euro coolant. I thought they would flush the whole system first but I guess not. Technicality eh.. Anyways, so I started doing some research and came across this video. I bought the right coolant for my car along with distilled water and a coolant cleaning conditioner. I super flushed my coolant 5 times until only clean violet/purple coolant was coming out. It takes a lot of time to do this but it’s very satisfying. This might sound cliche but If you want something done the right way you got to do it yourself. Thanks to Chris and the alike to teach us to do it ourselves.

[@chrisfix]

That’s exactly why I make my videos! Glad you got it flushed right!

[@christophergrove4876]

I just wished to say how much I appreciate your videos. When I was in my twenties, I worked on my cars all the time, repairing, maintenance, fixing up an old car etc. I was also into tinkering around the house and workshop. Then life got in the way... divorce... depression... and before you know it, did not do anything for myself. Then one day I realized how much the brain's "creative force"... tinkering, "maker" stuff, repairing, modifying, art etc... all helps to HEAL depression. Where once I was actually afraid to look under the hood in case there was ANYTHING wrong, now (almost 60) I'm determined to not just own my car but "OWN" my car... if you understand my distinction. I find your videos, and the videos of makers and tinkerers out there, INSPIRING and helpful! Cheers! :-)

[@DeathByLego]

You got this man, keep going. I’m proud of you

[@Dmar201]

Well said sir.

[@JamesJohnson-wl8kx]

We think just alike brother well said

[@siachen6680]

I started doing this type of stuff in my early 40s, age doesn't matter if you really enjoy what you do

[@lowhertzhighspl]

I know EXACTLY what you mean! Same situation here!

[@jimkline746]

Thank God for KZbin and for people like you who like to educate the rest of us who wanna do it ourselves and save money and make sure it's done right.

[@chrisfix]

Thanks a lot!

[@spazzologist]

Exactly, this way you KNOW 100% it’s properly flushed!

[@ThePrincesselise06]

I agree Jim, Chris and people on here have saved me thousands of dollars. Chris is excellent with explaining things!

[@awrocaw6973]

Agreed!

[@ImBooX2]

Chris, one thing to watch for with the thermostat. In some cars you put the thermostat in first and then put the gasket on. Sometimes there is a machined recess on the manifold for the thermostat to sit in and then apply the gasket. On that vehicle the recess for the thermostat was in the bolt on part of the housing, so as you did, the gasket goes on first.

[@chrisfix]

Thanks for the info!

[@earthcandleco]

Man! This is so helpful! I just bought a Z3 with 162K miles. I’m certain this needs to be done. I wouldn’t have thought to do it without your videos. I’m trying to think of things I can do at home to protect the life of my car. Thanks so much for these videos!!!

[@mattshorts375]

Hey, did you flush your System? If yes Was it easy?

[@earthcandleco]

@@mattshorts375 I, personally did not. I had the coolant system replaced & also the clutch & flywheel. So, all that fluid is new.

[@reubprue8602]

If plan (A) you don't have a sucker for the hose, try plan (B) blowing into the reservoir with your mouth over the opening. That should get the flow going. Of course if you have a neighbour kid you don't like then invite him over for plan (A).

[@danoberste8146]

Did it that way myself today. Worked great. To keep your mouth away from all anti-freeze orifices you could probably do this with a shop vac on blow.

[@erickestrada1979]

Reub Pru i read this in the guy from the videos voice

[@optimusprimus89]

Erick Estrada I totally did that!

[@kipfleming7952]

Bahaha. I can hear it now. "Hey kid, I'll give you five bucks to come suck on my hose." Bahaha. I'm sorry that is terrible.

[@sugarbombs6884]

Kip Fleming mmmmmmm antifreeze

[@man2meandyou]

i don't even have a car but this is so satisfying to watch xD

[@jayrichy123]

Same

[@Px05119]

I just purchased a band new car that comes with a maintenance package. I'm still watching a lot of his videos.

[@JohnDole]

Im buying a car in the next few months and i love watching this stuff for some reason. Also im not really into mechanics and whatnot. lol but it is quite satisfying also I just learned that chris actually lives pretty close to me which is pretty cool :)

[@Chris-oz5md]

+david Blash wished he lived near me so he can fix my dam car cant trust mechanics in houston

[@JohnDole]

haha, I feel ya. I plan on doing all the work to my car

[@sdjnwhyNZ]

As a van owner, would be interesting to see you bring a van back to life, especially those utility ones with a solid ladder base for future upgrading and add-on appliences: toyota hiace, ford transit, nissan caravan, VW T5, etc. Probably lots of tradies need your instructions to care for their workhorses. Thumbs up to you as always.

[@ax75f92]

Your videos are super detailed and easy to follow. Really good job man! One thing that’s worth mentioning is that most engines will have a coolant drain plug on the engine block. This will help speed up the process by completely draining the engine of all the nasty water before beginning your clean water flush. 🙌🏻🙌🏻🙌🏻

[@twistdshade]

Just a few tips to add in.. Any time your vehicle has repeated overheating issues, always replace the thermostat. Even if the thermostat isn't causing the initial problem, overheating can often ruin the thermostat, causing it to get stuck closed. Plus it's a cheap part to replace, usually under $10, and usually easy to get to. It wouldn't hurt to remove the gasket from the thermostat before you do the flush, that way if any pieces of the thermostat happen to fall in, they'll come out in the flush. The overfill tank system works, all thanks to the radiator cap.. All radiator caps have a spring in them, which keep them completely closed up to a certain PSI. Whatever this PSI is, is usually indicated on the cap, and your owner's manual will usually tell you what PSI cap to replace it with if it goes bad. When the engine warms up, the antifreeze inside will expand, building pressure inside the radiator. When the pressure reaches the PSI indicated on the radiator cap, the valve in the cap will open, allowing some antifreeze to escape into the overfill tank. Most radiator caps are "Self Burping". So there's really no need to remove the cap to release air from the cooling system. When you can't put any more fluid in, but you know there's just air taking up space in the system, just fill the overfill tank with the remaining antifreeze, then cycle the engine by allowing it to heat and cool a few times. You'll notice the level of fluid in the overflow tank get lower. This method could save you from a big mess, or even serious burns from scalding hot antifreeze. The radiator cap allows fluid to flow out when the pressure builds up, but it also allows fluid to flow back in when it's not under pressure. When the engine cools, and the pressure inside the radiator falls below the pressure outside the engine, it creates a vacuum and causes antifreeze to be sucked in from the overfill tank. The radiator cap really is an amazing and important part of our vehicles that we often take for granted. So any time you have problems with your cooling system, the first thing you should do is replace the radiator cap. It's the easiest, and probably one of the cheapest fixes. If the radiator cap doesn't open to vent fluid into the overflow tank, the cooling system will continue building pressure until it eventually finds a way to release the pressure, like blowing off a hose, gasket, or ruining your water pump.

[@chrisfix]

twistdshade Thanks a lot for all of the tips! I appreciate the time you took to share them!

[@bradleygambino5021]

ChrisFix one thing i would like to add to the tip @twistdshade left, when you turn the vehicle on with the funnel full of antifreeze and while waiting for that thermostat to come open, do not let the level of coolant in that funnel drop below the funnel? otherwise you are chasing your tail on the air. not sure if that makes sense or not?

[@chrisfix]

Bradley Gambino Thanks for the tip Bradley!

[@residentboejiden5796]

My grandpa and i been doing this since 1996. Its nice to see the next gen doing stuff like this and teaching others in the process, way to go

[@beefnacos6258]

It is nice because a mechanic won't do all this.

[@numbers7889]

@@beefnacos6258 and they’ll probably over charge you too. I’m doing this to save a few bucks.

[@calebdavis9175]

I'm about to do a complete cooling system overhaul on my 99 Durango. I'm changing out all the hoses as well as the water pump. Radiator is already new. I'm super nervous for some reason, but watching your videos before doing something always makes me feel better. Keep up the good work!

[@mediaphile]

I saw this video when it was released five years ago. Skip to a couple days ago, the plastic quick-disconnect coming off the heater snapped in half, and all my coolant leaked out causing my car to overheat. I managed to replace the part and get everything all connected up, but totally forgot about there being two different types of coolant, and I filled the system up with green coolant instead of the DexCool I was supposed to use, and now I need to flush it. For a moment I thought I'd need to take it to a shop, but then I remembered this video, and having re-watched it, I'm confident I can do it myself. Thanks Chris! Your videos have saved me a couple times when I really needed help.

[@nhtdetails5244]

Since it’s been 5 years since you changed your coolant and it’s “5 year protection” you should do a video on what the coolant looks like now!

[@chrisfix]

About 3 years after this I ended up having to replace the radiator (kzbin.info/www/bejne/g5bVpnSQmsd8m7c), but when I drained it for the first time after doing this it looked pretty healthy and still had some life left in it! Coolant lasts 3-5 years so it would be the same at the 5 year mark haha

[@thelombax]

@@chrisfix Very nice to see you commenting on older videos, and also answering the questions in the comments !

[@aarone.9323]

If you mean coolant lasts for that long, is it a problem that I'm having to fill my resivoir up every month?

[@thelombax]

@@aarone.9323 Check if it's dripping on the ground, if not it might be a bigger Problem.

[@stracky2]

@@aarone.9323 You likely have a small leak in a one of the coolant hoses, or if your vehicle has an EGR cooler, it could be leaking through there. Alternatively, you could be loosing coolant through a leak in the head gasket, which is a more urgent and expensive fix.

[@MrSolvaring]

Advance Auto Parts: This is advance auto parts, how may i help you? ChrisFix: Hey GUYS! Chrisfix here! Advance Auto Parts: Not this guy again.

[@Bandicoot803]

@MrSolvaring: [ Hangs up receiver ] Toot-toot-toot-toot-toot-toot...

[@TheJuan72]

LOL

[@tsfyootwiin]

MrSolvaring I dam ner died when I seen this 😂😂☠️💀

[@Dayv7]

Your videos have come a long way in 8 years. Definitely refined your presentation technique, and the blue gloves was a great idea to let everyone know they're watching CF and not another guy. Kudos for your success, I'm sure you've helped loads of people fix up their cars over the years.

[@zachbreece2311]

Chris thank you so much I blew my heater bypass line yesterday and I swapped out my hoses today and then did my first ever coolant flush. I’ve been watching your videos for years but have only started doing the stuff this year and my car is running/looking amazinf

[@chris_sndw]

Now I want to buy an old car and clean the cooling system.

[@JonathanJulbe]

Jajajaja

[@catstantine2455]

You can borrow mine to clean.

[@Heisenberg355]

@@catstantine2455 same hahaha :D

[@RusBerry]

Come clean mine

[@TheBishop12]

hey mine too

[@jacobhanifon9883]

Just a tip: when cleaning and removing the gasket, you should put a shop rag or towel in the hole to keep the debris from falling inside your clean and flushed cooling system.

[@chrisfix]

Thanks for the tip!

[@djsi38t]

The rag will get in the way,just be careful when doing it like chris did.

[@josephs9268]

@@djsi38t I stuff a rag in and move it to one side, get half the gasket, pull the rag out fast and repeat.

[@dedalliance1]

This is good advice when removing toilets too. Don't ask me how I know.

[@yaseenqadir5983]

@@dedalliance1 I'll ask any way

[@JCPaintGuy]

This is a very well done video. You took the time to show-and-tell, and your explanations are proper, without being too technical or too dumbed down. Excellent job Chris, excellent job.

[@headoftaxreformandpercenta4908]

My next project possibly this weekend after I change my serpentine belt. Great work in everything you do, your clear and thorough instructions are truly life changing and very much appreciated.

[@coopersmith7721]

I’m a 16 year old Australian watching this at 11pm because it will most likely be useful at some point in life

[@go0b3rtron7]

I'm a 36 year old Canadian watching this at 12am because I didn't have KZbin to show me this stuff when I was 16. Confirmed, it is most definitely useful ;D. Cheers my young brother from the land down under!

[@I_killed_that_beard_guy]

I'm a 18 year old Indian watching this at 7:03 PM and the reason is same as yours. I learned a lot from Chrisfix

[@jackgordon2689]

Same

[@stove3539]

I'm a 17 year old American watching this at 10:45 pm because I'm replacing my buddy's radiator this week and I want to make sure I'm doing it right. Hope you don't run into this situation but if you do hopefully you'll be prepared, cheers!

[@nazsakim8705]

I'm 38 from Malaysia..still in MCO quarantine..😔😔 pray for Malaysia

[@sandhayou]

This guy is explaining things in very easier way and usage the camera wisely to capture every part he wants to talk about. Great job mate.

[@jacob1931]

Totally agree

[@fucheduck]

now we need a tutorial on how to use a camera so more of us can make proper "how tos"

[@jazeeratech1594]

yup he is

[@cookiecrumbles3971]

Mate this dude be liking comments from 1825

[@JimmothyJones4799]

Thanks dude!!! I was intimidated to do this myself but you made it super easy. Got it done and heading to AZ for the winter with confidence and saved me alot of money

[@ahmedjabbar7467]

Chris it's been 5 years since I watched this video and told myself I'm going to try this, to this day I still haven't done it as I'm too chicken 😅 today I've watched it again for the I don't know how many times and I am going to say enough is enough I am home in lockdown and finally going to give this a try on my 2004 honda civic type r ep3, if I succeed then I'm going to try and change my brakes and bleed and refresh the brake fluid for which I watched your video of again yesterday......in short I want to thank you for your years of free service to the people of the world by sharing such clear and concise videos on how to be proactive and save money and also gain a skill and satisfaction of doing something ourselves and knowing that it's been done right and no corners cut. You are much appreciated and a valuable part to this world. It's great to see hard work pay off and I hope to continue this journey with you and watch your channel grow further and branch out more. Much love and respect from Birmingham, England. Thank you.

[@chrisfix]

Awesome! As long as you're methodical and you know exactly what you're doing (which I'm sure you are), it'll be a breeze! Thanks for the all the support from England!

[@ahmedjabbar7467]

@@chrisfix you're the man Chris 👍🏽👍🏽

[@epicuredeter157]

@@ahmedjabbar7467 hey man how did it go? I want to do the same haha

[@ahmedjabbar7467]

@@epicuredeter157 I've been working on my house and garden so far during lockdown just got one more room to decorate then I'm done and can spend some time on the cars I will definitely let you know once I've done it 👍🏽

[@epicuredeter157]

@@ahmedjabbar7467 okay thank you very much and good luck💪🏼

[@johnathandoe5357]

You have such high quality videos. You don't skip a single detail

[@chrisfix]

Thanks!

[@thorterry4014]

ChrisFix my radiator is pretty rusty inside, should I super flush it or just change the whole radiator?

[@TheJared1445]

Thor Terry I'd replace it is it cost effective? No, but you don't want pieces if the radiator coming off and going through the system. just depends on how rusty it is

[@SamInHilo]

Did this on a GMC Sonoma 2.2l engine. Did not ever run close to clear after 3 flushes, remained the stay the same after the second flush. I was told that the fluid in the block is below radiator hose and would need to open a plug in the block to drain. I do like your videos as the best on KZbin. Thanks for effort it takes to that them.

[@taxidenhaaggoedemiddag8918]

Wow you are still lookimg at the comments after 4 years 😂

[@chrisfix]

Yep

[@skolnidilny1246]

@@chrisfix nowAYYYYYYYYYY:))))!!!

[@reeeeeverblu]

well, after 4 years there is still cars cooling system and poeple who need to flush it.

[@itisinickt]

@@reeeeeverblu no. cooling system were made illegal last week. no cars on the road currently have a cooling system

[@enzo7327]

I've learnt more from Chris' videos than I have at trade school in the past year and a half.

[@chrisfix]

I'm glad you're learning a lot!

[@corinelson7837]

You need to pick a better trade school then. As a journeyman mechanic I find ChrisFix's videos are geared towards basic maintenance and a very general understanding of things. As a journeyman with two apprentices, I find Chris is better than myself at relaying information that should have been learned in trade school and that I expect them to already know.

[@DiabloEncarnate]

I hope this is a joke. Never expect an apprentice to know something...

[@corinelson7837]

@@brandonmaqi3697 sounds like you need to pay more attention at school instead of (apprentice language)ing around at school. Even Eric admits the ASE tests are, for lack of a better term, bogus.

[@petrusromanus4647]

Wordddd

[@josealbertocorona6948]

Bro, you’re the most straight forward, honest, helpful teacher I’ve known for a while….I was fortunate enough to meet 1 when I was a kid, but damn bro, I didn’t think y’all still existed hahaha….very happy with all the videos, thank you for your guidance!!

[@fit_pharmd4830]

Damn this is 8 years old. I just watched a video with you and Shmee 150 together! Did you ever think you're channel would grow this big and grab so much attention?! It's amazing how far you've come and we still see the same driveway now with a Hummer lol but just awesome to know how many ppl you've helped over the years including myself! Keep it coming!

[@henrymontgomery5401]

Never heard of this guy and this is the first video I've seen...within 2 seconds I was like, "DAMN, THAT CAR LABEL IS F'NG CLEAN! I don't know if he put in there afterwards, but that is great attention to detail, which says, this guy means business and is serious about what he does. I'm a new fan, bro!

[@soyabean911]

Henry Montgomery Chris Fix is the Don! Watching his vids are an investment of my time. If only the same could be said of all YT content! LOL

[@T0YCHEST]

I watched his transmission video he made changing it look like I can do it.

[@soundfout9499]

e

[@MomJeans2]

You can. @@T0YCHEST

[@T0YCHEST]

@@MomJeans2 ik

[@miakellner4534]

Gotta say I appreciate how scientific you are with your information. I ALSO highly appreciate you being environmentally responsible. Some people ignore telling others that anti freeze will kill animals and is harmful. Much respect!

[@chrisfix]

Thanks! I am glad you liked the video!

[@miogi8530]

Yeah some ignorants dony know that is sweet

[@miogi8530]

Yeah some ignorants dony know that is sweet

[@miogi8530]

Yeah some ignorants dony know that is sweet

[@TheTony137]

I'm not sure if things are different in your countries but in Australia, Coolants have an added bittering agent that makes the coolant taste foul and.. bitter, so that mistakes like drinking that sweet green water won't happen.

[@luisfuentes3012]

Chris I just swapped the radiator hoses, radiator, ac condenser, ignition coil, fan assembly and the radiator cap lol I'm super pumped because the van is actually working now!

[@TheMinydude]

Thank you Chris i watched this video when it originally came out and its cool to come back and watch it years later very helpful. I recently purchased a car and discovered that someone mixed two incompatible coolants together and my system gelled over the other day. Going to use your techniques in this video to fix my issues!

[@yappers7038]

Forbidden chocolate milk

[@birchberry9354]

I mean its sweet

[@governorrat8640]

Ye

[@mhmsureokay]

he did say its sweet and not for dogs

[@Seethenhagen]

No that's when a headgasket blows and you change the oil.

[@TTURBOVOLVO]

If you swallow that shit your liver will crystalize and youll get kidney failures follow by death, thats because of the ethylglycol in coolant.

[@dphorgan]

Give the used antifreeze to the guys who make Fireball Whiskey. They love it.

[@8Jhartzell]

David Horgan this deserves wayyyyy more likes.

[@TheNoobLaunch]

Hey, don't mock my favorite whiskey :s

[@ultra_rb2682]

David Horgan i

[@mansourmansour2494]

The worst drink ever

[@robstrocity999]

and people who vape haha. propylene glycol

[@TheLuxuriousKingDave]

Brother man, you would be a great voice actor. Found your channel today and I already know my life is about to change for the better. Thank you for taking the time to make these videos and being so thorough in your explanations. Bless yo 🙏🏽

[@JohnWick-yk3eg]

I've been an auto mechanic for over 20 years. Many of the problems I see daily could have easily been avoided by simply following the vehicles maintenance schedule. I use a program on my computer called Automotive Wolf car care software to keep track of all the maintenance for my 3 cars, a truck and even a generator. It automatically can send you text message reminders when any type of service is due. Two of my vehicles have over 200,000 miles and have never needed any repairs. Want to save money? Follow your maintenance schedule!

[@BallistaBomber]

WHY DO I WATCH THESE I'M 12 AND THE CLOSEST THING I HAVE ARE GO KARTS, I CAN'T STOP WATCHING THESE XD

[@hamodassie8484]

if you keep watching these things and if you like watching these you're gonna be a great mechanic pal

[@DonaldREdman-wj7jy]

Ballista Bomber It's great to learn more about the things you love. I wanted to learn this when I was your age and my neighbor at the time helped me with that I needed to know. Eventually, I went to school for it and now I can fix my own car if I really need to. But, no matter how much you learn, always be willing to learn more. With that, you'll be a great mechanic someday. Keep it up.

[@prestigeproduction57]

MallorcaThGR34T start em young #iyoutube

[@prestigeproduction57]

MallorcaThGR34T never late than never

[@beckblashill9490]

Lol same

[@joes.7536]

Gosh it feels good to look at that guage layout. It reminds me of my 2000 Ford Ranger. My first brand-new vehicle at age 19. That truck will always be a legend. Let her go at 180k to a new owner with that 2.5 4cyl and 5 speed manual still feeling like new.

[@johnathanhardee6953]

Im watching this video to clean out my 2000 ford ranger. just went over 210K miles. Looks exactly like his truck setup.

[@thatboywhocantsnipe]

Joe Bs I currently drive a 93 ranger I'm 19 and it's a 4 cyl with a 5 speed xD except it's only got 100,124 miles

[@richardjohnson4065]

Joe Bs I had a 2000 ford ranger in 2000 I was 21 my first ride it was blue in color I had it for like 2 weeks dealer took it back said the bank couldn't finance me the first time I ever cried in life but every thing is different now I can get any vehicle I want but yes it was a great truck 😢

[@mrfoxycracker4836]

maybe because it is a Ford Ranger..

[@subarutransmittedinfection1036]

MrFoxyCracker it's a Mazda my dude

[@josephfili8003]

As usual your video was the most complete explanation of the job at hand. Every point was clearly explained. Also noted all the safety points along the way. Keep up the great work!!!

[@victormartin4509]

You did a great job concisely explaining the entire process and editing. Thank you.

[@mitch1078]

Don't forget to fill up the thermostat hole with rag so the gasket pieces don't go down into engine block!!

[@unknow123abc]

Actually good additional advise

[@wannawatchu66]

I'd wad up a paper towel or two and stuff it in, then use needlenose pliers to pull it out or just leave some of it sticking out.

[@KevinSmith-ct8pf]

Der the temperature doesn't go up. Thermostat removed equals engine over cooled...

[@laurentbouchereau3157]

I really appreciate how you go step by step on the procedure and the explanations you give are easy to understand. super job mate

[@tylerbarefoot5687]

Just got my first car and watching your videos makes everything so much easier, thank you!!

[@elijahjones9244]

It’s been 7 years and Chris is still liking his followers comments! He’s the best!❤

[@justinferguson507]

What a legend

[@jamesdoe5824]

Doing a flush on my '96 Cherokee. I'm 6 flushes in and it's still brown hahaha

[@Chris-oz5md]

if that happens flush it with the water hose for a bit maybe all the dirt is stuck on the hoses. n then flush it normally like chris fix those

[@jamesdoe5824]

I ran Prestone coolant flush through 4 of the 10 flushes i did. spread throughout 7-8 days while still using it as my daily driver. I guess the inside was just really bad. I mean the car is 20 years old and while my dad had it I can't rememebr him doing anhything like this. Good thing i did the flush because it doesn't run hot anymore

[@Texas07AV]

Kaipo Fitisemanu did it finally come out clear after 10 flushes? I'm on #7 and used 2 prestone bottles...still comes out like the first flush

[@jamesdoe5824]

Texas07AV eventually it did start coming out clear and I put 50/50 mix back in. About a week ago, the heater hose exiting the t-stat housing cracked and I replaced it. While doing so, I got a look at how the coolant is doing after 300 miles and it looks green at first glance but when it all collected in the catch pan, it was slightly brown. Not murky, but brown. I was kind of upset about this because a coolant flush is a little costly and t looks like I'll have to do it again soon

[@saphserg5221]

done the heater core? that could be what the issue is im getting ready to flush my 90 ford laser all the way through and it seems like a pain for once. 10 times tho? nah screw that

[@stevem5691]

This was one of your first videos I watched years ago when I got my '99 Tacoma that had chocolate milk for coolant. Worked like a charm and, while that truck is long gone, I remember just how easy it was with the steps laid out here. I'll be doing a complete flush on the coolant, along with all of my other fluids in my 2013 Tacoma this spring and I'll be using these same videos to do it. Thank you for what you do man! I'm in LI but I travel to NJ often. If you see the cleanest Taco you've ever set your eyes on screaming your name randomly, you know who it is!

[@cathoare8935]

Lol

[@mjremy2605]

Superb information, many thanks! Clear, concise, detailed with good visuals. Thank you for no music!!! Subscribed. I'm female, in my 60's, don't know much about cars, but high time I learned to do basic maintenance. Now all I have to do is round up some empty milk containers from my neighbors or empty pickle buckets from local fast food place for recycling fluids. They have lids so makes it easy to carry back to auto store. My dashboard heater produces no heat, but fan works fine. I'm sure the heater core is clogged. Car is from 2008, Toyota Yaris Stick Shift. I need to flush out the heater core and radiator for two vehicles, my little RV as well, which is a 1998 Ford E350 V10. Thank you, Chris!!!! Greetings from California.

[@danielvalsyuk5907]

Chris I have been watching you since I was 7 and I didn’t know you made so many videos and they are all so useful so thank you for helping my uncle with a lot and I can tell you will be a great help for me when I start driving

[@dariussims1677]

After watching all your videos. I feel i can put my name in the paper as a classified mechanic.

[@junior2471]

Darius Sims 😂😂😂😂👍🏻

[@Kaiju3301]

Can provide own soapy wudder

[@SE45CX]

Yeah, it can't be that hard to match the actual work done compared to a prof mechanic. As a owner you put way more attention to it. Like checking all pulleys for play during a belt replacement.

[@rezagrans1296]

But a chRuuue* mechanic, diagnostic abilities and insight¡!¡ STill, the owner may have strong will to learn

[@levygaming3133]

Darius Sims should you really be telling us though, if it’s classified?

[@ThriftyGarage]

It's no wonder why you have so many views on your videos. These are great in depth how to videos. Leaving little to question aside from perhaps the exact vehicle make and model. You do great work!

[@chrisfix]

+Thrifty Garage thanks

[@dalynnbanks713]

My neighbor just recommended me this video thank so much Chris very in-depth on everything. Thank you so much bro.

[@victorriley8024]

Watched quite a few car fix videos but yours are the best keep em going I'll always be watching👍

[@Bigboylando]

I’m just glad some people are still decent humans and want to see other people save money and succeed in life good on ya ✊🏼

[@leonoremurphy9382]

I agree, best to be thankful for his patience and video for FREE... which is a big help for many of us.!

[@tylerrahm7980]

13 million views. He’s making some money off this.

[@Bigboylando]

@@tylerrahm7980 that don’t take away the fact that he’s helping people learn how to do things and save money*

[@stylozbtw9867]

No one: Scientist: H20 Normal people:Water ChrisFix:Wooder

[@elmarberwari7846]

Angel On wii you meant H2O not H20

[@langam7017]

The "no one:" literally adds absolutely nothing to this.

[@thatoneshortboi]

Langam I know right. Yet another person who can’t use this fucking format right.

[@ace88205]

Its Warter

[@fun_ghoul]

@@ace88205 Is that available at your Toyoter Deala?

[@NapoleonBorn2Party]

I have been maintaining my car on my own recently to cut costs, and your videos helped a lot!

[@muhammadjeenah4415]

Hi Chris ,it's a pleasure watching your videos ,from cleaning to maintaining. You do an awesome job educating. Thanx a million

[@chrisfix]

Thanks a lot!

[@troythegardener]

​@@chrisfixthis madlad is still out here liking and responding to comments on an 8 year video. What a legend you are sir, even with all your (totally deserved) success you've never forgotten to stay humble. Thanks for all you do.

[@gagenej]

Used to watch you videos for fun when I was around 15. Now 6 years later I have to change my radiator and wanted to do a full system flick while I was at it. I already know how to do it but I still watched you video for the hell of it. Love the content man!

[@Watchyn_Yarwood]

Suggestions regarding thermostat replacement. 1) Stuff a rag into the engine side of the thermostat housing to prevent gasket material entering the cooling system while you're cleaning the gasket surface. 2) Use a Scotch Brite pad to clean the gasket surfaces. 3) Always use anti-seize compound on the threads of a steel bolt into aluminum housing.

[@wannawatchu66]

Should I put anti-seize on brake bleeder screws? I ask because I bled my brakes and ended up rounding the nut heads because they were so tight.

[@user-ur4wo3tw3i]

ChrisFix fixed it! ChrisFix is CERTAINLY the best I've ever seen when it comes to things like this! I can watch his videos and I have no questions at all. Straight to the point and easy to understand. I am very detail-oriented and can critique something like you wouldn't believe. ChrisFix passes 100%! He's the best! 👍

[@wickedares5153]

Replying to update a previous comment it's been 7yrs and this video is to this day so useful and helpful. Chris your video are always a huge help and fun.

[@alg.3242]

You know what I like about Chris, he gets to the point. None of that talk and more talk. Thanks for keeping it simple Chris.

[@sparkx251]

Excellent work. Can you imagine the dealer or average service guy flushing this many times to achieve this kind of perfection? This is why it often pays to do your own maintenance.

[@sparkx251]

Then I saw this today; There is no way the mechanic is doing a complete flush on newer model cars unless the thermostat is easy to access - the best they'll get is about half the coolant out at one time... unless they have a controller that forces a computer-controlled thermostat open. If you wonder why it costs $500 to flush your coolant, it's due to all the time it takes to remove and replace all the parts that are in the way of your thermostat. But if you're only paying the price of the coolant plus another $50 or $100, then they're either not doing a complete flush, or your car has a thermostat that's very easy to remove.

[@DeadmanKira98]

Thank you for this tutorial, I just purchased a 1988 Cadillac Brougham and the previous owner only filled the coolant system with water and now it is full of rust. This information is very helpful in helping with the restoration process. This car is literally my dream car so thank you very much. Have a good day.

[@chrisfix]

Glad the video could be helpful! Good luck with your Cadillac!

[@johnlambert3273]

Chris, a great series of video's for the DIY'er. I do want to point out a couple of things however. The blue funnel your using is wider at one side so pouring in that side makes it easier to to hit the mark and have less spillage. Also, I recommend the OEM thermostat, oftentimes the cheap aftermarket ones cause problems. On my Toyota, there is a jiggle valve in the thermostat, follow your service manuals placement recomendation if your car's thermostat has one.

[@ajs622]

Great video Chris. Only thing I would like to point out is that draining the radiator and overflow tank does NOT empty the whole system there is still water left in the water jackets in the block and in the heads, also the heater core that stays in the system. That said after your final flush with distilled water you will still have straight water left in the motor, if you use 50/50 premix you are going to water it down further since there is still water left in the motor that you are not able to remove. In areas that get cold in the winter its best to use concentrate and mix it 70/30 that way when it mixes with the water still in the system it deludes down closer to 50/50 rather than less than 50/50.

[@ryangonzalez4674]

How would you empty out the rest of that

[@thomasarussellsr]

I've been getting greasy for 40+ years and have to say, great video and great explanation. The only thing I would add is to put some anti-seize on the thermostat bolts. They looked pretty rusty and could seize up before their next removal. breaking the bolt off in the block, head, or intake (depending on the model of vehicle) is a nightmare with aluminum, blocks etc.. Anti-seize is a great preventative for that.

[@chrisfix]

Thanks for the tip!

[@thomasarussellsr]

Hey, no problem. The anti-seize is great for lug-nuts on any vehicle that goes mudding or drives in winter salt/ice melt as well.

[@mdevidograndpacificlumbera1539]

Damn dude I see you everywhere, on the woodworking channels I watch and now this! Lol

[@LITTLEBRAT775081]

Thomas Russell what happens if I only fill through reserve instead if radiator like he did. I still bled out air ... I think

[@ryanwatling647]

Joseph McDonnell it should be fine some cars don't even have a radiator cap so you have to use the reservoir

[@VendettaFXR]

Hey Chris, As far as the coolant goes, you can use the Orange coolant (Dexcool) in your car, assuming you flushed out all of the old coolant. After all, thats what majority of GM cars come with from factory. What you should never do though, is mix the two together, as they are chemically incompatible and will gel up and clog your cooling system. For all its trouble, it is better to just flush your system if you have a GM car, or if you're not sure what you have in your system, and stick to the tried and trued Green Coolant. Can be found much more easily, and just easier to handle.

[@2000nerffreak]

not really, it could work but can also attack the pump or gaskets in the system.

[@alexwill3722]

His vehicle is not a GM and I would stick to OEM coolant as it only costs a few bucks more and is made for your car / truck. The only thing is most dealerships only sell 50/50 and why pay more fo half a jug of water!. Have an old empty container to fill halfway with the concentrate coolant and pour distilled water into each one of the coolant bottles ( but easier to use premixed if you need more than 2 jugs ).

[@ImperatorCaesar22]

Never use Dexcool. Terrible stuff

[@tyrtle7081]

Oh man, I went to a mechanic to fix a head gasket. He found it was the coolant outlet for a ford fusion. He didn't replace it, he through some stop leak and added new coolant. NEVER FLUSHED IT. I am now fixing myself, and fck it was the most disgusting-looking coolant ever. (still not a head gasket, I had a blown gasket on coolant outlet which was leaking)

[@DIXIEMAFIA251]

All Hail CHEVY!!!

[@athancoreextreme]

Already 7 yrs but went back to this bcs i need to do it. Chris is a lifesaver.

[@kaylinbrenay8163]

Thank you so much for this, I bought my self a project of a mom van and my plan is to fix everything but the brakes myself. My husband is 100% incapable of doing any car repair himself so people like you on KZbin make me feel like super woman

[@chrisfix]

I'm glad to see you are fixing up a van! Thanks!

[@jameswilson8820]

Why Diss your husband

[@kaylinbrenay8163]

My husband disses himself! I changed the oil in both of our rigs and my husbands response was that he'd never be able to do that and that I'm so handy. He's happy that I can easily learn stuff like this.

[@DeathByLego]

You were super woman before

[@mayasevelen]

Why not fix the brakes too! 👏🏾👏🏾

[@rmg8729]

Bro this vid is from 3 years ago but you liked a comment from 30 minutes ago. Wow.

[@chrisfix]

haha

[@trapperkeeper6202]

Me like

[@kenjohnson8854]

And...?

[@x-man5056]

So?

[@maxedchannel4812]

In car forums replying to an old post was a crime lol

[@dox_sinful5351]

This video is 7 years old and is still the most informative video I’ve found on this topic

[@WC3fanatic997]

This video kept popping up now and again throughout the years for me. Decided to finally watch it since I am going to be doing it on a used car I got, and I come to find you're working on a Mazda truck with the exact same motor as my Ford Ranger, so thats convenient.

[@stanleyhache6407]

Chris... I just want to compliment you on your excellent videos and explanations... great mastery of the camera, intervals and talk throughs. I can see that you do a lot of post-production editing to ensure understanding. You are among the best and I don't understand the thumbs down... must be people clicking on the wrong button.

[@ninosavukoski7342]

Stanley Hache OR turning thir monitor/screen upside down to like again.

[@dmartian]

I have not seen video like this before how people flush the coolant. I bet 99% when you take your car to a mechanic, they wont do 3-4x times of flushing like Chris did. Good job Chris! Like your video

[@IceTrey98c]

+David Tedja no most shops actually hook it up to a $3000 professional flush pump thing...

[@luketrochinski3954]

Trey Stine drrrrr im trey stine I like sarcasm drerererr

[@TechnoDelta]

+Trey Stine well, they are "supposed" to.

[@WindingDreams]

And then they find another "issue" ;D

[@luketrochinski3954]

Bingo or the tech does a suck job

[@prn8330]

Thank you for explaining things so clearly for car maintenance beginners like me.

[@robford41984]

This video of yours is pretty old 7 years now. You have helped me with a lot of car projects as well when I was just learning. I am also still learning and trying to learn more. I have a VW once again in my life and I am bringing it back to life. I would like to do a coolant flush on that and obviously its very different and theres not much info anywhere on how to.

[@cunningham7756]

About to start a coolant flush in my "new" 1989 f250, hope I can get some good results. My coolant ain't quite as bad as that, so I'm pretty hopefull! I've been watching your videos since I was 10 even though I didn't have a vehicle, but alot of the stuff I know now is thanks to you, and I definitely have saved a lot of money because of these videos!

[@chrisfix]

Glad the videos are helpful!

[@makern5304]

Did it went good?

[@pixelsszn]

This Dude Will Get Famous Some Day

[@chrisfix]

Thanks!

[@Alucard-gt1zf]

Pixel Eater this dude is famous!

[@dudeonlygamingandotherstuf7791]

2 million

[@AZDESERT2024]

2.1 million followers. Most shows on MSNBC are lucky to have 750k -1.5 million viewers.

[@MrErikw26]

The only positive thing about NJ is Chrisfix

[@dads3boys]

Well done Chris! As always you were very detailed and articulate in your explanations and the video quality was great. Good idea about removing the thermostat during the flush just to save the time to wait for it to open up. Since thermostats are relatively inexpensive to replace, I liked your idea about replacing it after the flush. Just a note to folks that some Petcock valves have a butterfly fitting on the end. These tend to be easier to open than a bolt-type fitting. Also, maybe I missed it, but this would also be a good time to check the radiator hoses to determine if they need to be replaced. Thanks again and God bless.

[@kevinarmstrong9267]

June 23' Been a fan for years. Keep up the quality vids. Great details, production & editing. Doing this exact procedure on 07' classic Silverado. Thanks

[@brady783]

I watched this when it was still fresh. I just watched it again because I'm flushing my cooling system and changing my thermostat this weekend and needed a refresher. Thanks Chris!

[@god.mp4]

"The only ingredient in the water should be water" -ChrisFix 2015 Edit: guys all i wanted was a funny comment on what Chris said, not a discussion on what type of water you can drink

[@Tacos4Ever23]

Well with everything that gets added to water in just about every source of water, it seems like that should be said, sadly.

[@guyfamily11]

@@Tacos4Ever23 yeah but can't h2o on its own be harmful to humans?

[@your_average_cultured_dude]

@@guyfamily11 no. H2O2 is dangerous aka oxygenated water. Edit: it's not really recommended to drink distilled water because regular water has magnesium, calcium and other minerals that are good for the body, and distilled water doesn't have any of those minerals. But it's still safe to drink it.

[@mojoe7912]

@@your_average_cultured_dudeWhat? Where did you get your information? H2O2 is hydrogen peroxide and pure water is fine to drink

[@your_average_cultured_dude]

@@mojoe7912 hydrogen peroxide is oxygenated water... And yes it's ok to drink it, but you don't get healthy minerals that are contained in regular water.

[@joemendoza8422]

just bought a 3.0L ford ranger! gonna be replacing the coolant since it’s pretty dirty. it’s awesome that we basically have the same car which makes using your videos easy for me to do maintenance!

[@dogdude7485]

Dude, you've helped me more than you could know. You've also given my wife A LOT of mechanical confidence. You're the best informative automotive youtuber by far. Hope you're doing well!!!

[@chrisfix]

Thanks a lot!