Cummins CP3 Removal - 3rd Gen Cummins We figure I would show how to pull a cp3 on this 2006 dodge Cummins that I have to pull the engine out for repairs.
Пікірлер: 32
@SpiceyTycey5 ай бұрын
Excellent video, we need more 5.9 common rail content 👍👍
@CUTTERUPROB5 ай бұрын
More to come! I just want to finish for more 12v stuff and we will be on it
@outlawsix1322 Жыл бұрын
Hey the CP3 shouldn't be loose loose and flopping around right?
@CUTTERUPROB Жыл бұрын
Shouldn’t be loose at all
@outlawsix1322 Жыл бұрын
@@CUTTERUPROB okay what does it mean if it is? because somebody vandalized my truck and they tried to cut or pry the metal fuel line that connect to the CP3. I'm trying to access the damages that have been done but don't know what I'm doing and the closest diesel mechanic to me is 98 miles away.
@steveschultz93613 ай бұрын
Do I need to keep the three bolts tight before i use the puller or can I take all the bolts off then use the puller and push the pump straight back
@hunterweir1010 Жыл бұрын
so i was just removing my cp3 and forgot to hold the harmonic balancer while trying to remove the 27mm bolt, you said the pump doesn't need timing? so me being worried about the timing on the truck is out the window im fine right? about to replace the injectors and pump but stopped what i was doing in the process of removing the pump because i cranked on that nut a few times and thought i threw my truck timing out of whack
@CUTTERUPROB Жыл бұрын
You are fine the cp3 doesn’t need to be timed
@elroyelblander62773 жыл бұрын
Added a 2 micron filter to our 06 few years ago... like our komatsu 6.7's have... should prolong the life of things
@CUTTERUPROB3 жыл бұрын
That’s a good idea as well
@diamondranch442 жыл бұрын
I’m fixing to replace my cp3 when Installing do you tighten the gear nut first and then the three on the back?
@CUTTERUPROB2 жыл бұрын
You want to tighten the 3 nuts on tye back first
@JJNino-AutoRepairServices Жыл бұрын
Tanks
@theofficialdiamondlou24185 ай бұрын
I’m asking everyone .. When I try to loosen the shaft nut , it just turns the pump .. 🤷♂️ any ideas ?
@issaccarrizales19897 ай бұрын
Where did you get the gear remover tool?
@CUTTERUPROB6 ай бұрын
Mine is a snap on one
@4AM_DJ3 күн бұрын
You can use a 7/8 open end wrench and a small 2 lb mallet hammer. And just....tap, tap, tap, tap, tap, tap, tap....and eventually it will come out
@apollocreed20892 жыл бұрын
Did you just cut that crossmember in the front that holds the radiator and intercooler?
@CUTTERUPROB2 жыл бұрын
On this one someone had cut and welded it back together. It did a shot job so I cut it in the same place so I could weld it so it was safe again. But customer ended up having someone worse finish the truck.
@jesserasso10423 жыл бұрын
It sucks having a blown up truck I blew my 06 up took the engine out melted the shit out of 5 & 6 I had the machine shop bor it 40 over and had it aligned honed my main bearings are on back order so still no build but it happens for a reason
@CUTTERUPROB3 жыл бұрын
You should be able to get them. I got some from Mahle last week
@jesserasso10423 жыл бұрын
Brand new mahle pistons power driven budget cam sense I have it apart I'm gonna build it rite I hope
@jesserasso10423 жыл бұрын
@@CUTTERUPROB I ordered clevit h series race bearing but those are on back order
@jesserasso10423 жыл бұрын
@@CUTTERUPROB I have all the other parts pistons cam new head heavy valves spring incnal valves porting the head though it's pretty much done but just some clean up on now
@CUTTERUPROB3 жыл бұрын
I can drop ship a set to you. I have stock in the states
@elroyelblander62773 жыл бұрын
6.7 believe is timed?.. wonder why
@CUTTERUPROB3 жыл бұрын
There not either. Its just a pressure pump.
@elroyelblander62773 жыл бұрын
@@CUTTERUPROB correct.. ,,but I read some place or someone misspoke perhaps.... maybe it was a dream...lol...but anyway..I have a recollection of someone saying 6.7's were timed...but anyway
@elroyelblander62773 жыл бұрын
@@CUTTERUPROB apparently it's to synchronize the pump strokes and the injectors firing...it's a noise thing..is what I read...