I replace the high pressure fuel pump on a 2005 Cummins
Пікірлер: 37
@IowaCoyotes2 ай бұрын
You have the exact same personality my dad does! I miss my dad at times, haven’t seen him going on 4 years
@jirusjirus9322 Жыл бұрын
Hey Morgan... I'm glad that you describe your research into this procedure before you even started the removal. Finding the other folks that throw down the caution flag about losing a bolt or washer is good preparation for the job to go smoother. But then there's always something unexpected that pops up...in cramped quarters 😖 Good plastic repair 👍
@stuartramage5933 Жыл бұрын
awesome video morgan ,peace an love from scotland stu an family.
@kevinhall2266 Жыл бұрын
Hopefully you’ve saved someone from a big “oops” with your helpful tip! Success!
@aaronpowell4885 Жыл бұрын
Looks like a job well done👍🏻
@davidburchfield2720 Жыл бұрын
Sounds like you did a good job it's running
@WildWestGarage Жыл бұрын
It’s always nice when they run, especially after popping 5 grand in parts.
@jimdaly5077 Жыл бұрын
Thank you for videoing. 👍🐝🌞
@martyrutter3630 Жыл бұрын
Big bad diesel. The elusive nut or bolts that find away to go missing. Don’t know if you have ever used magnets from a microwave magnetron there’s two very powerful magnets that can be easily removed. I service microwaves so I have excess to them. They are wonderful for solving this problem. 👍😄
@jirusjirus9322 Жыл бұрын
Sounds like you have access to an excessive amount of magnetron magnets...😂👍 I've heard a lot from a friend that they are very powerful and many people are throwing away old microwave ovens...i think it's about time i get one of those and open it up...🔧
@WildWestGarage Жыл бұрын
A good magnet can be a mechanics best friend sometimes
@aaronpowell4885 Жыл бұрын
Sounds like I've been missing a good pert or two! Over the years I've harvested several transformers, blowers/motors and wiring. But always left the magnetrons alone... doh🤦♂️
@martyrutter3630 Жыл бұрын
It’s alive 👍👍
@paulmcreynolds1774 Жыл бұрын
Nice job Morgan. You're absolutely right. There is some good stuff on you tube but there's also a lot of worthless stuff on there too.
@JAMESHOPKINSIBXCNC Жыл бұрын
Good to see you Morgan! How’s the tig welding coming along?
@WildWestGarage Жыл бұрын
I’ve been swamped with repair work so haven’t had much time but I’ve had some success with the TIG welding. My son will be working with me soon so I’ll have more time.
@wayneanderson991 Жыл бұрын
Nice job Morgan, the heat and vibration is hard on those plastic covers. I used to have an 06' Ram Cummins with a 6 speed manual. I'm currently running a 17" Ram Cummins. Great trucks. How's the tig welding going?
@WildWestGarage Жыл бұрын
No time for tig welding practice lately but my son will be working with me soon so that will help
@skidonkiedonk83174 ай бұрын
Did you take the gear out or did it stay in place
@WildWestGarage4 ай бұрын
The gear stays
@billyb.9878 Жыл бұрын
Good job, man's gotta work so the family can eat. Practice your tig welding. 👍🙃
@sts.5564 ай бұрын
im doing mine while im replacing the radiator i think that will make a lot of room for festivitys
@jensenwilliam5434 Жыл бұрын
Thank s
@theofficialdiamondlou24184 ай бұрын
I’m not worried about losing the nut and washer . I’m worried that I can’t get the nut to come loose without turning the pump ??… 🤷♂️🤷♂️ Any ideas ?
@WildWestGarage4 ай бұрын
I can’t remember what I did but you could put a wrench on the crank to stop the engine from turning. Come to think of it, if you are replacing a p pump I don’t think it’s timed like a mechanical injection pump so it wouldn’t matter if it turned a bit. I don’t do a lot of these so maybe I’m not the best guy to ask.
@theofficialdiamondlou24184 ай бұрын
@@WildWestGarage at least you answered. It’s worth a shot. I figured it had to be turning the whole engine. That was a help.
@tcurlyleethompson1424 Жыл бұрын
Dunno if my 2006 has the same pump,but lm putting this video in my playlist so if l have to replace my pump....well my pal Morgan can help me!
@WildWestGarage Жыл бұрын
The truck I was working on is indeed a 2006 so yes it will be the same. It’s actually a pretty easy part to replace. One thing I didn’t show is on a truck with an automatic, you have to put a wrench on the front of the crank to keep the engine from turning when loosening or tightening the pump shaft nut.
@tcurlyleethompson1424 Жыл бұрын
@@WildWestGarage mine is a 6 sp. manuel,barely has 50,000 miles on it,so maybe it will be awhile...
@WildWestGarage Жыл бұрын
@@tcurlyleethompson1424 not even broken in yet
@tcurlyleethompson1424 Жыл бұрын
@@WildWestGarage l have'nt even hauled wood in it! Im about to turn 60 & its the nicest pickup l've ever owned!
@tom.p1986 Жыл бұрын
Nice work. Isn’t that a 2006? 2005 have the bubble head lights
@WildWestGarage Жыл бұрын
Your right, it’s a 09 05 and it scans as a 06
@lylekanglemyer9690 Жыл бұрын
Better you than me working on diesel tractors yes trucks 👎. I can’t twist around anymore with my arms.Great job Morgan stay safe bro