Today we replace the stock he351 on our 2007 Dodge Ram 2500 Cummins 5.9L with a brand used Fleece Cheetah 63/67 he351.
Пікірлер: 59
@witcher713 жыл бұрын
I did a 63/67 with the 341 cover on my dinosaur 12 valve. Love it!
@cupwalker24.78 ай бұрын
Nice . That's a good turbo , I usually like to leave my 4 turbo mounting bolts just a little loose on the manifold it makes getting the down pipe clamp on just a little easier and then tighten everything down . 👍
@robertturnbull29033 жыл бұрын
I was ready for some full throttle rips. That's not your usual driving style. Awesome video.
@horsetorquesdiesel3 жыл бұрын
Gotta give it a chance
@cdun69693 жыл бұрын
This channel is growing fast keep the uploads going
@slowaf12v3 жыл бұрын
Great Install Video!! Sounds Amazing!!!
@mikestrucks3 жыл бұрын
Awesome video again 👍🏻 i love the sound !!! My 67/67 makes the same noise 💨🤘🏻
@horsetorquesdiesel3 жыл бұрын
Whistle pounds brother!
@torysukut96923 жыл бұрын
Great content. Will definitely be looking forward to the gains on the dyno.
@horsetorquesdiesel3 жыл бұрын
Coming soon!
@Tuck2fly3 жыл бұрын
I’ll be here for them all!!!
@ryanbrown9183 жыл бұрын
Yeaaa buddy. Love this 3rd gen project series
@horsetorquesdiesel3 жыл бұрын
Thank you!
@bdjm85953 жыл бұрын
Looking forward to the dyno run!!
@RamTahoe3 жыл бұрын
I had a 63/67 on my 06 for a while....... recently bumped up to a 63/73, what a difference! Doing things different order but similar to my truck, I have 150% Exergys tho
@horsetorquesdiesel3 жыл бұрын
They are fun on tow trucks and daily drivers!
@garvensgarage89033 жыл бұрын
Can you please do a drive pressure run and explain how it would perform on the dyno if you had much smaller injectors. Say like roughly 20 percent overs
@samgingerich97643 жыл бұрын
I've got the same cheetah charger.with a PDD 3rd gen compound kit. Love the setup, Should try a PDD setup and see how good the results are!
@chrismangham11492 жыл бұрын
Which large turbo do you have? I just picked up the 63cheetah to pair with my S475
@Filzkiiz3 жыл бұрын
YesSiRr!!😎👊👍🤙🔥💯😉👌!! Making it puRRr!! Hehe!!😁😊😆!!
@darth_taterz3 жыл бұрын
be easier to change the turbo if it was a 2nd gen...lmao coming over from PDD channel laughing my ass off in the first 10 sec keep it up bois
@horsetorquesdiesel3 жыл бұрын
It would’ve been for sure lol
@jamesmarlar6963 жыл бұрын
Awesome as usual my next upgrade on my 2nd gen will be a turbo and sounded sweet
@horsetorquesdiesel3 жыл бұрын
Good choice!
@riley429453 жыл бұрын
Can’t wait to see the s467.7 on here that will be the deciding factor for a s474 or the s467.7
@horsetorquesdiesel3 жыл бұрын
They are fun!
@HangryDiesel2 ай бұрын
Where yall located ?
@PnwTinkerer3 жыл бұрын
Awesome video
@larrypeachy23913 жыл бұрын
Did you do different cam ? I've heard these factory scams are terrible (I have an 07 5.9 as well) but wonder just how big of gains are to be had with good cam ....
@horsetorquesdiesel3 жыл бұрын
No stock cam sir
@Nathangies3 жыл бұрын
I have a he351 67/67mm colt cam stg 3 100hp sticks firepunk tuned. Spools like stock or better
@peterdecasas36553 жыл бұрын
🤘🤘
@jeffbeaird7473 жыл бұрын
Are we gonna see a turbine launch again..? I hope not
@horsetorquesdiesel3 жыл бұрын
Never know with me lol
@jackfarmer11372 жыл бұрын
What light is that you're using under the hood?
@horsetorquesdiesel2 жыл бұрын
Snap on
@BrandonMartinez-bw8py2 жыл бұрын
From Colorado?? Larry h miller
@horsetorquesdiesel2 жыл бұрын
Yep that’s where I bought it
@DPats12283 жыл бұрын
Why does the title say fleece cheetah when it’s a Taterbilt? 😂
@horsetorquesdiesel3 жыл бұрын
Because Austin Tate confirmed it wasn’t his and Chase Fleece texted me confirming it was their turbo produced around 2017.
@DPats12283 жыл бұрын
@@horsetorquesdiesel nice. I had a tater built on my old 5.9. It ripped. Now I’m running diesel power source’s 66/74 turbonator s300 on my 17 6.7. Runs like a dream. Haven’t hardly touched 1,000°F since install
@hey_youtubeim_back21592 жыл бұрын
Is he saying molimeter?
@horsetorquesdiesel2 жыл бұрын
Yes yes he is
@uhmlmfao3 жыл бұрын
Probably better off it was a cheetah, taters aren’t called taterbombs for no reason 🤐
@horsetorquesdiesel3 жыл бұрын
Bullet dodged 😂
@Justme-jt1ef3 жыл бұрын
Taiwan tornado
@horsetorquesdiesel3 жыл бұрын
Nice!
@therenaissanceman53113 жыл бұрын
Awesome video man. Can't wait to see the dyno numbers
@mvcg-cl4cr3 жыл бұрын
Which way does the turbine to manifold gasket go in? Hump towards the manifold or turbine housing?
@jimmungai19383 жыл бұрын
Hey your hair is just fine if that works for you that’s good for me you guys don’t have a topside creeper you need to get one make life a lot easier this is six in a row jim hey keep up the good work guys
@jeepsnthings5653 жыл бұрын
Sweet! It sounds amazing!
@TheProchargedmopar3 жыл бұрын
👍
@73cjproject3 жыл бұрын
Great video! Definitely a noticeable change in how she sounds. Looking forward to seeing the dyno changes. Do you plan to use this later as a bottom charger for compounds? Or do you not see it living that long?
@horsetorquesdiesel3 жыл бұрын
No this will only be a single turbo!
@73cjproject3 жыл бұрын
@@horsetorquesdiesel big single for the 1k hp! Should make for a fun street truck. Easier and more cost effective than compounds for the hp goal?
@dcoppedge063 жыл бұрын
Mulmer? You mean millimeter?
@horsetorquesdiesel3 жыл бұрын
Mulmer I meant what I said 😂
@utawmuddy59403 жыл бұрын
SO happy you started another channel, Love power driven, but Not enough videos! I love seeing ho often there is a new one, especially now the you are building up your 3ird gen. I am in the process of building up my 3ird gen and can really utilize the info your brining. Great job, and keep em coming. You have a vary faithful follower here!!!