Cummins ISX CM2350 Full Tilt Manifold with Bully Dog Turbo Install | Peterbilt 389

[@nvragn]

Absolutely wow I have been a licensed heavy truck mechanic for over 30 years and I haven't ever seeing that before. I'm also a chrome guy I always say that I must have been a truck driver in a previous life. I had a 90 Chevy step side and the chrome was insane right do to the drive shafts. Not shitty chrome it was show chrome that's not really out of this world for show trucks but it was my daily driver. The sheer amount of things that you can get for them. But I also had stuff made. You don't have to believe it but I had over 30k in the chrome alone. The show chrome I was talking about earlier is insane expensive. I was just about ready to have the entire front and back axle housings done but along comes marriage then a couple kids and I probably don't need to say what happened to the truck. Ty for putting this up for the world to see 👍

[@luckydhaliwal88]

Just did a similar conversion on one my cm2350. One of the most powerful trucks I've ever driven. Definitely worth it. I run a shop in Seattle bro would be dope to link up and talk engines.

[@CustomRigs]

That’s awesome! Do you fix trucks?

[@seansequist5452]

Can you make a video to explain how you deleted the egr cooler and how you routed the coolant lines after you deleted the cooler?

[@wendellhagg3511]

Nice Install. Enjoyed Your Video. Thank You for Sharing !! H.

[@ВадимЖирнов-д3г]

Привет из Твери! Мира, здоровья, удачи, работы!

[@tonyhamilton1569]

Have watched your video several times noticed you deleted your egr cooler wondering if you have had any issues with dot inspections

[@1tuffzx10]

I run a N-14 red top Cummings celect plus & went wit the pdi turbo & manifold. Big difference in sound & power. I run a 8 inch exhaust also

[@AJ-zg7sc]

Blows my mind that Cummins owners still don't know it's called Cummins

[@hoost3056]

​@@AJ-zg7sc for real. It's an insult.

[@josh47807]

​@@AJ-zg7sc auto correct

[@chrisbelsito4231]

The ole faithful N-14 red top!!!!

[@1tuffzx10]

@@AJ-zg7sc my misspelling is just auto spelling & me not reading b4 I pressed post. I kno the correct spelling as it was my very 1st job outta trade school & all the parts I bought over the years, lol 😂😂😂

[@jeffearnest3269]

Nice looking truck, and nice looking engine also ,take care of yourself and your truck driver and may our Lord be with you always wherever you go.

[@Jreddygo]

Did you have to buy a plug kit to plug or cap the egr holes.?? Thanks

[@100pyatt]

Killer looking set up man very clean !!

[@ryanbachman9227]

My old boss replaced the stock turbo that was on his 2014 isx Cummins but he didn’t have the 3rd stage on the Jake brake

[@CustomRigs]

We lost 3rd stage as well

[@ryanbachman9227]

@@CustomRigs I have heard you need to replace the cam. Is that true

[@CustomRigs]

@@ryanbachman9227 no we’re debating if we should replace cam or not. It will just help bring some jakes back

[@scottycollins1829]

Gr8 Content & Installation!!!!😎💯

[@ernestodominguez8310]

Very good truck, I have a question, when you changed the turbo, was the engine brake lost or is the engine brake still active?

[@dustinrieck312]

Where is your egr cooler delete water pipe? Not a good idea not to run without it its a factory part!!

[@angeldelgado9049]

Did you had to tuned it after putting up that turbo set-up?

[@MsRoddogg]

Yes you do

[@EdgarMartinez-gr5si]

Where are you located at?

[@caseyleonhardt4656]

Did same go my new x15 but does alot more then remove 3rd stage I barely build 10 psi engine brake sucks but sounds way better lol.. finding good tuner hardest part!

[@MsRoddogg]

Do the cam swap

[@MsRoddogg]

And also a hx60 turbo would helped aswell

[@k20trucking40]

@@MsRoddogghi I have Cummins isx cm871 which cam should I swap in it when doing the delete? Thank you

[@LuciferRatzinger187]

Thank you for the video!

[@Navi-u5t]

How much boost are you running with the bully dog turbo? Had few guys couldn’t get tuning right only gets 20psi boost

[@themendozafamily5055]

Dope install bro . Crazy how you are so young and knowledgeable . Saves you a ton of money away from the shop . Do you guys have to run ELD up in Washington ?

[@CustomRigs]

Thanks! Yeah we run ELD just more simple, enough hours for local work. But my w9 is Eld exempt been debating going paper log again.

[@rodriguezequipment2113]

Dobu have a part number for the bully dog turbo? And were did u get the conversion kit ?

[@KiwiReacts]

No computer tunning was need it?

[@timothyberlinski2299]

Why do ypu gius get rid of your VGT? I thought VGT was a good thimg?

[@repogameproper6324]

Hows she running now im looking to doing this since my vgt just took a poop but scared or reliability thanks in advance

[@dotruking7331]

The jake brake work . ??

[@orhanmahmuti4873]

Great job

[@carincampos9103]

What Turbo is it??

[@michaelgoza5437]

Does yours ever lope or sound like a stock car when you First start it up? I think mine has a oversized cam in it. An wasnt told it had it lol. Just curious.

[@JasonSmith-zg4cw]

Did you lose your third stage on your engine brakes ?

[@eddebevic2097]

Are you still running this settup?

[@WesleyFeely]

Wheres your coolant crossover

[@rontn64]

Who did your computer work?

[@busaking78]

How did you delete the doser injector lines

[@CustomRigs]

Remove the line that goes to back of engine than go to fitting supply store and find a plug that would fit.

[@busaking78]

@Custom Rigs Thanks. Happy Father's Day to you

[@geoffdrain877]

VGT delete? Tell the rest of your story. Really curious to hear it

[@garddog379]

$2000 conversion versus $7000 VGT turbo is probably the story

[@zacb7427]

I tell people this and these tell me its not possible to remove the other one and put this one

[@carlosmira9426]

Is that deleted 🤔🤔looks nice

[@CustomRigs]

Oh no that’s illegal..

[@pedropedro2837]

Nice job

[@cranomics]

Any plans to ever cat swap that truck? If so will you do a full swap video?

[@CustomRigs]

It’s definitely in the plans.. once we blow this Cummins up lol.

[@cranomics]

@@CustomRigs lol I hear you. My front gear structure let go in my 871. Currently in the process of getting a swap done

[@albertkoks2268]

@@CustomRigs это будет то ещё веселье!

[@cargotoolshop5319]

@@cranomics my problem is I pick up ISX 870 engines for under $5000 and it's hot or miss but been lucky so far

[@omarh4694]

Did you have any problems after deleting?

[@jameswright4777]

ive never seen a truck with 2 shocks on each side up front.

[@CustomRigs]

It’s a 12 gauge air ride kit. 2 shocks On most front air ride kits

[@antoniofitchett9288]

Having mines done now on a W900 with a fresh rebuild on a 550 cummings i cant wait!!! Did it make a difference in yr performance??

[@kelpiecowdog]

There is no ing in cummins.

[@antoniofitchett9288]

Wow u really took the time out just to say that..😂

[@masterok9181]

накинем лайкосик Артём тебе привет

[@eutimiocastellcastro1235]

What turbo you push borgwarner?.

[@eutimiocastellcastro1235]

What turbocharger you put?.

[@CustomRigs]

@@eutimiocastellcastro1235 bully dog

[@TheDyna1965]

Did that swat affect your jakes

[@woodscasey]

Did you have to change it the intake? And remove anything else??

[@romig3570]

No you don’t have to change the air intake only the manifold. But yeah you do remove a lot of thing if you going vgt to non vgt

[@MisterUnicornFL]

do you do this work? can i hire you?

[@Bagnum05]

Any notice in jakes after changing turbos?

[@CustomRigs]

Yes lost the third stage and second stage slightly weaker.

[@k20trucking40]

If you used the holset hx55 turbo that’s from the Cummins cm570 signature with the same exhaust manifold you won’t lose your engines brake it will get slightly weaker, but you will have all 3 stages and if you put the cam shaft from the same cm570 and put it in a cm870 or newer model you get back the strength of your jake brake

[@spoolinsvt6489]

@@k20trucking40 Is that true? I have never heard of that for a solution

[@robertramos1190]

What happens to vgt lines ?

[@MsRoddogg]

His is newer so no air lines

[@nathanunderhill3211]

I thought that looked like i5 near Bellingham 🤣

[@CarlosRamirez-zh5jk]

What year isx is that? Been debating about upgrading my 07 Cummins isx too.

[@CustomRigs]

14

[@CarlosRamirez-zh5jk]

That thing hums nicely down the road! Is it deleted? Is that kit "deleted " friendly?

[@garddog379]

Yes it’s delete friendly

[@Kipill70]

Благодарю за видео!

[@johnf1441]

Does this modification require a tune ???

[@CustomRigs]

Yes

[@usman9348]

What tune did u use?

[@arturonajera1214]

Link?

[@DeLonghe_P_Ness]

Gotta do the cam, too. If not, your jakes will be some SHIT. You'll lose stage 3 of the jakes, but the truck will run much better.

[@CustomRigs]

We run here on the flat no hills and the jakes that are left are good enough. Hopefully we can put in a cam soon

[@truckerron]

Trucker Path SUCKS anymore. PRO DRIVER TOOLS is going to take over, now. Thank you very much!

[@able_trucking780]

This on a isx cm870 will it add hp?

[@CustomRigs]

It’s cm2350. Not sure about cm870

[@able_trucking780]

@@CustomRigs did it need to be tuned?

[@Countrycashflow]

Damn I need to do that to mine

[@Andrew_Karapeedee]

Привет Тёма. Лайк как всегда в уголочке

[@shtransportinchommyflores5421]

Nesecito información

[@keepontruckinoutlawlife1248]

Hell yeah driv,ah

[@draitonjose3223]

Olá acho o máximo os caminhões de vocês as vias são muito boas, aqui no Brasil é tudo diferente agora com novo governo estão prendendo e multando os caminhões equipados,estou para pegar um Scania LK 141 1980,uai este turbina parabéns pelo equipamento.

[@vladimirs6537]

Добрый день! Дайте пожалуйста номера на запчасти и где можно приобрести

[@kirktitgen7453]

Nice install ….now give that truck a nice wash …its very dirty ….im shocked 😳

[@usman9348]

Did u have to tune after putting the turbo in?

[@romig3570]

If you putting in non vgt from vgt turbo then you do have to do the whole programming. But if just changing turbo on already non vgt then no

[@albertkoks2268]

Даааа Артём звук твоего "котёнка шикарен против каминса! Турбинка свистит приятно.

[@benjaminjackson2310]

Better drop that max boost, or a rod is gonna go through the side of the block. No egr gas in the cylinder on factory compression is gonna eat that isx for lunch. Look into it…

[@robertramos1190]

You skipped on explaining like 100 other things 😂

[@SHADOWURLD]

Welp that timing was uncanny

[@CustomRigs]

?

[@SHADOWURLD]

@@CustomRigs got a notification as I was trying to tap on something else and started watching 11 seconds after upload

[@CustomRigs]

@@SHADOWURLD oh LOL

[@ЄвгенійКоломіець]

А+++

[@N54God666]

vgt delete is the stupidest thing you can do, all you do is hurt your power and don't pick up any fuel economy. I'm getting 6.8mpg pulling 105k over the Rockies from Tacoma, WA to Caldwell, ID. 700HP, stock emissions. my secret, I have 3.08 finals on my 18spd, and guess what? even when it was completely stock I would still pull my buddies w900 with 605 2050, only difference is he has 3.58 finals and he struggles to get 5mpg. 99% of owners just don't understand how to spec a truck correctly.