Custom Crocs | Is It Possible?

[@alinar.8665]

Thanks for the sand paper tip! First I washed the weird factory glaze off the crocs with dish soap, sanded, then coated the paintable area with 1shot clear vinyl primer. Then painted with 1shot enamel paint. So far so good, the paint adhered well and no flaking.

[@rileybergic6001]

How bout now

[@Naenatify]

Update?

[@Barktholemew]

👀

[@annh227]

Have they flaked now??

[@josephbeenchanged990]

I used fabric markers which smeared but worked okay eventually it faded. Low key if ya'll figure this one out we gonna be out here painting our tires next.

[@AngelusBrand]

Good video idea but I don't know if I want neon tires running everywhere 😂

[@MsTraydale]

For the love of God, they are not made of rubber!

[@holyarmageddon19]

they use special paint to write white lettering on tires

[@C.S.T]

​@@MsTraydalebranded crocs are made of a trademark resin called Croslite HOWEVER fake crocs ARE made of rubber there is no need to be rude, you owe that person an apology

[@echoplexic]

Try using Mr. Super clear matt spray as a primer and as a sealant or if you prefer use semigloss mr. Superclear as the sealer. Since crocs are resin based this should widen your pigment options. Mr. Super clear is renowned for its use on resins especially ball jointed dolls, and provides a remarkable tooth for color to stick to and using multiple layers of spray will make it very durable.

[@laifepearl9271]

the ending result of the dyed shoes are lowkey nice, I like the tinted look

[@Moe125]

I was thinking the same thing. If he did that same process multiple times it would probably have a better color but that color isn’t bad.

[@lisat9707]

If he preheated them it would work even better. The dye type might be the issue here and the top coat.

[@becklievenbruck]

About time someone put it to the test 😩

[@whattheflorida7159]

Used interior car paint and it will last forever

[@kaidence6900]

Right

[@dondeestalaleche7652]

Perfect timing! I’m repainting the back tab of a Jordan 3

[@amberger1999]

THIS IS EXACTLY THE VIDEO I WAS LOOKING FOR! THANK YOU FOR MAKING IT

[@AngelusBrand]

Awesome!!

[@ayeodell]

Just did a pair of crocs for a friend (I was very upfront that it wouldn’t last) it was such a frustrating pair to do because tape and vinyl stencils barely stick. 10/10 would NOT recommend painting crocs!

[@stepmothercity]

My friend got a bratwurst at the fair and the orangey grease spilled on my white crocs. I have tried every method to clean it off, and it is just as orange as ever. So apparently brat grease works.

[@AngelusBrand]

Bet they are great at the dog park. 😭

[@pezzyx2743]

Please make more of these types of videos!

[@MsTraydale]

But they aren't rubber. They're proprietary closed-cell resin, Croslite.

[@dyrt_dogg4236]

SEM Vinyl Dye...... sold at Oriellys or anywhere else SEM paints are sold. It is for vinyl, rubber, some weird plastics etc. Perfect for those crocs, any color since it is mixed on site. I have only sprayed it from a spray gun, never brushed it on but should work I would imagine. Just use adhesive promoter with it as well. I have used it on vinyl motorcycle seats many times and it has help up great for years.

[@bryanphillips5391]

Super interesting! Never heard of that product before.

[@MsTraydale]

How does it fair on Croslite?

[@Lazy_Prophet]

I'm determined to make hydro dipping work on crocs. That primer you used, I asked the manufacturer and they said it wasn't really good for shoes.

[@brandonb8441]

Liquid Kicks finisher would hold the paint better. Angelus finisher doesn’t last long term in my experience on some materials. But this was a great video!

[@AngelusBrand]

We are all for trying other products and if you like them that is great! A finisher isn’t going to help against something you can’t stick to though. You could put something really strong like urethane but it won’t hold on to the rubber.

[@o13Dennison13o]

LK Top Coats are scratch resistant. In nearly all cases, it's better than Angelus finishers

[@jd.customs]

bro they’re obviously gonna use their own products in their video. if they use another brand then it would make their products look bad since not even their own sponsored artists use them in the vids

[@o13Dennison13o]

@@jd.customs Sure, but to blow off other products in the comments is a little annoying, especially when their finishers are barely better than nothing

[@AngelusBrand]

@@o13Dennison13o We weren't blowing off the product. We are always open to people trying other products. If you read the comment it is us saying that it wouldn't have helped in this application. You could of put poly-urethane on it and it would still fall off. This video has to do with adhesion against rubbers.

[@sekerseker4763]

those failed white crocs are actually pretty stylish now. would rock

[@domarobyn9520]

This guy is now my favorite person to watch on angelus

[@samuelnewton1987]

Quite informative my good man and was a great video to watch

[@owenrichardson1878]

I recently did a pair of custom Crocs, I mixed each paint 1:1 with 2 hard, seemed to work pretty well but I guess we will see!

[@Yosoytuupapa]

Response?

[@Sarabara113]

What is 2 hard? Just curious

[@jahyeet1137]

I just sharpied some bullet holes with the croc holes and put some sealer idk if it’ll last but it’s drying rn so I’ll update how they hold up

[@Stephintojoy]

How did it last? I want to use sharpies for a little freestyle design

[@jahyeet1137]

@@Stephintojoy don’t do it dude it seems like a good idea all it did was bleach into my crocs and became blurry I can’t even take it off because it seeped into the pvc that the crocs are made of there’s no way to customize crocs and I had heard that but didn’t believe it but I can say it’s just a lost cause

[@andreabolanos-hernandez6402]

Awesome work, as always, Bryan 🙌🏼

[@bryanphillips5391]

Thanks Andrea!

[@fabiankrt3696]

I think the dye used to dye boost material could work on the crocs, it's called idye poly

[@AngelusBrand]

Make a video about it! We would love to see what people come up with.

[@jamesseverin9472]

I've dyed a light pair of chuck hi tops in RIT synthetic dye (graphite) in a boiling pot that made the white rubber permanently become dark gray and they've been thrown in the washer and worn for years and that dye has never failed. It has faded a bit from the fabric areas but the rubber is still unfazed. Surprised they didn't just boil the rubber to take in the dye.

[@AngelusBrand]

@@jamesseverin9472 Boiling it in is a great idea! We would worry a bit about teaching that though as boiling water can always be a little challenging for the younger people.

[@jamesseverin9472]

@@AngelusBrand ah, understood. Regardless, keep up the good work!

[@dreamoore8499]

Similar to disperse dye in boiling water is sublimation

[@certifiedcustomz4301]

What about cutting the paint with 2 Hard the same way you do when painting midsoles?🤔🤔🤔

[@reedbrooks3887]

Maybe a sole bright and dye mix could penetrate the rubber with UV, I know that’s the go-to for dying icy rubber soles.

[@bryanphillips5391]

That was something I considered after we finished filming, but we also didn't have a rig for uv lighting. Would love to see someone try it though!

[@echoplexic]

@@bryanphillips5391 how about uv cured gel nail polish even just as a clear coat

[@bryanphillips5391]

@@echoplexic could work! Someone should try that out.

[@christianpaganmarbert8637]

es Luisito Comunica wow, no lo puedo creer quede en shock, se supone que esta en un viaje, pero bueno asi es la vida, Saludos desde Puerto Rico

[@marjoben]

no quería comentar nada pero si

[@johanmorales3154]

Jajajajaj por eso di click

[@sarahlowe8310]

Have you tried using Avery Dark TShirt transfers to print off your design, use a heat gun to adhere it to the croc then use an exacto knife to cut out the holes and hit it with a heat gun again?

[@chandlerestes8470]

Try RIT DYEMORE for synthetics!!!

[@tamiepetersen801]

I have worn my customized croc-style shoes for a couple years. I used Sharpies. After about 2 years, I touched them up. I get tons of comments.

[@itsDjjayyArt]

I did a lilo stitch custom on my crocs didn't even think of sanding or spraying beforehand

[@keiziaaa]

does anyone know where I can get customized crocs??

[@JoJo-ul4qs]

I customized mine using sharpies it worked well! (Edit: read the reply by me on this comments for some tips on using sharpies on crocs)

[@kaidence6900]

I might try that

[@echoplexic]

Still holding on or did it fade?

[@echoplexic]

And did u do a topcoat?

[@JoJo-ul4qs]

@@echoplexic the design is still on there, the only part that rubbed of slightly was on the edge of the toe box near the big toe. Other then that it’s all there. For reference my design was only on the top par of the crocs where the holes for the jibizts are. I would recommend cleaning your crocs and getting rid of any dirt on them first. Second I will say that the sharpie tend to clog up often while drawing on the crocs , so this does require some patience. To solve the issue of the sharpie clogging up I had a piece of paper near by wear I would scribble on to unclog the sharpie. Lastly I wear the crocs I customize for light use, I wouldn’t really recommend customizing the crocs with sharpies if you intend to use the crocs daily as they might get dirty and cleaning them might wear off the design. I have cleaned my crocs since I customized them but only around the design not on top of it. Maybe using a top coat would eliminate this issue, I don’t know of a top coat that would be best for this? Maybe a topcoat was recommended in the video I don’t remember as I watched it so long ago.

[@Yosoytuupapa]

I’ll be conducting a test on some custom crocs, if it works I’ll be posting on KZbin. I have access to some very durable paint. 👏🏽

[@alicetippee2330]

God please tell me it's not Alpha 6!

[@cjriecks]

how did it work?

[@unburriedtalents599]

Wow that was super informative, thank you! Do you think the white ones would get darker if dyed repeatedly and maybe surface prepped like the black ones?

[@AngelusBrand]

Unfortunately not. Dyes can easily over saturate a surface no longer allowing any dye to penetrate.

[@unburriedtalents599]

@@AngelusBrand thank you so much. 🙏🏼

[@Joey-dd1qj]

Do you think the paint will hold if the surface was abrasive??

[@MrKinghuman]

i dyed mine with feibings, all black, and they seem fine

[@putocuchinta]

I learned the hard way 😤

[@Itsmarialynn]

Yea it works I paint on my crocs all the time

[@debreonnawiggins3457]

How does crocs do it though ? Like what machine lol. I’m wanting a size 14 in the army camo but unfortunately it stops at 13 if love to know how they do it so I can find the proper place to do so feel me

[@kevinsukdolak5007]

Make leather crocs?

[@uwebindewald7153]

so happy to so swellguy again on angelus!!! but hold up a minute, i dont remember their being a tutorial for the burnt/in flames nike blazer mid, that are shelved on the top?!

[@AngelusBrand]

🤔You are right. kzbin.info/www/bejne/qHzPoaWva9BohpI Here you go from Justwin!

[@Yosoytuupapa]

What about the furry Luke Comb crocs? How is that image on crocs? What method was used?

[@trollface391]

You need dye that will bond to the rubber... ❤It's usually plastic dye I think

[@angelab8580]

I used mod podge to set my paint but didn't paint over the areas where there would be creasing. No issues.

[@AngelusBrand]

That's a great suggestion - we're glad it's worked for you! Our intention for this video was to show that our paints alone might not work on the Croc rubber material. We might need to look into this method! 👀

[@Naenatify]

You used mod podge as a primer or as a top coat? I'm thinking of using a dtf print but don't know whoch sealer to put on top?

[@kreativecustomkreationsllc4275]

What about fabric mod podge? As a flexible finisher that’s what I use to get loose glitter to stick to crocs

[@AngelusBrand]

We have not tried this ourselves. You might need to experiment a bit with that. However, another viewer mentioned they've used it in the past and it seems to work well for them.

[@echoplexic]

I've had mod podge get kinda gummy over time on resins especially in warm weather

[@whotakesallmynames]

I read that mod podge is not waterproof and so we sprayed our crocs with a layer of acrylic spray paint. It worked well as a top layer, but the problem, like usual, was with the bottom layers sticking to the croc itself

[@Naenatify]

​@whotakesallmynames you sprayed an acrylic on top of the paint & it worked?

[@Native0Lette]

My intention is to sand the croc, use a spray adhesive for primer and use acrylic paint then seal it with shoe waterproofing

[@davidfonseca7061]

Does doing this peel later

[@veyselcicek6794]

Thanks

[@FUBAR956]

Alpha 6 had a product called Sole Saver but I can’t find it on their website.

[@nomanejane5766]

Try hydro drip, or spray paint

[@whattheflorida7159]

The stuff it made out of is same stuff used in cars interior. Acrylic do work but it will fade over time.

[@AngelusBrand]

You're right! The paint to this day still is still intact, but it has severely cracked. You might not get lasting results using our paint on Crocs without touching up the paint every so often.

[@echoplexic]

@@AngelusBrand try Mr super clear spray clear coat next time, I'd bet it would last longer especially with multiple layers to build Color up.

[@lisat9707]

You must HEAT the crocs for dye. They also must be AGED! The protective stuff is pretty deeply penetrated throughout the material not just the surface. Wash them dry them multiple times. They will shrink ALLOT! New crocs are not what you want to use especially for dye. Try the ones that are already painted with sparkles!

[@marcusmartinez8718]

What about using rubber dip paint or rubber spray paint designed to adhere and flex

[@AngelusBrand]

Definitely something to try!

[@HappySingh-ri9qh]

Those crocs are about to dye.

[@johngoins1902]

Don't crocs come in different colors how do they color them at the factory?

[@HellaReckless]

That’s why they sell the Jibblitz lol

[@hcramos]

Wouldn’t you use 2hard for the type of material crocs are?

[@AngelusBrand]

No, the 2-Hard will "harden" the paint onto the surface making it even less flexible to work on that material.

[@she_sings_delightful_things]

Curious if you were to first coat the Crocs with a bendable glue (flexible glue) THEN paint in top....🤔

[@AngelusBrand]

I think the only issue with that is the paint being able to adhere well to the glue. Not too sure if that would fair well. But it's worth a shot!

[@she_sings_delightful_things]

@@AngelusBrand I think I'll try tonight! (Will report back, lol)

[@she_sings_delightful_things]

@@AngelusBrand It was terrible. 😂 Wondering about transfer paper and a heat gun? Saw a vid but want to know longevity.

[@CopoeiraBernardo]

Is prep necessary to do the outsole (bottom) with walk on red?

[@AngelusBrand]

The Walk on Red/Black is for leather soled and wooden bottoms only. For that reason on the leather, yes you will need to prep. On the wood bottom, a light sanding will work. Hope this answers your question!

[@CopoeiraBernardo]

@@AngelusBrand I was wanting to make croc red bottoms actually lol

[@elvizprezz]

Why he don’t use Angelus 2 Hard to paint into the rubber?

[@AngelusBrand]

2-Hard is for harder surfaces that do not flex. You would use that on say a back tab hard plastic or something ridged.

[@MasseurDavis]

A True sneakerhead 👟 wouldn't be caught dead wearing those! Crocs are hideous.

[@theresawilltheresaway4033]

@angelusbrand why don't you try hydro dipping the crocs using hydro graphic film and see how that holds up?

[@AngelusBrand]

Hey Will! since our paint is not oil based, that method would not work. The paint would sink into the water not allowing that cool dip.

[@slimstx21]

@@AngelusBrand There are a few vids here on KZbin of people hydrodipping with the Angelus paint and it worked pretty well. I am not sure how soon the paint peeled afterward.

[@d0llkatie]

After the shoes are painted with leather paint, do they dry completely or are they tacky/sticky? I have a pair that I want to paint only for cosplay and I probably won't use them again so I'm okay with them not lasting a long time, just don't want to make a mess if they don't dry well.

[@AngelusBrand]

Once fully dry, it's fine. The layers just need to be completely cured. We have seen many use them within the cosplay world. Please show us your creations if possible by tagging us on our Instagram.

[@ZaxazCc]

Bro I Just Wanna Draw On Them Sooo Should I Sand Them??

[@harlyquinnz9886]

Can you paint over crocs that come with a design already like for example “snake skin” crocs?

[@AngelusBrand]

You can, but like you saw here, it may not last after some wear and tear.

[@Ldub360]

Seems like you should have used 2hard though

[@Yosoytuupapa]

What about starting off with a primer before paint

[@jjack0212]

I did everything they did, but I used Jacquard paint instead. They haven't cracked or peeled yet.

[@Ermac888]

How about now-drake ? Lol

[@Kikokella]

How about now ?

[@whotakesallmynames]

HOW ABOUT NOW 👀

[@Itstheoccasion]

Can gac 200 work for it ?

[@mathewcox9371]

I was expecting a clear coat finisher as opposed to the Angelus finisher or in addition to it

[@AngelusBrand]

A clear coat of some automotive or anything of that nature would 100% crack off or turn hazy. The products hang on the surface of the rubber not seep into it at all.

[@mathewcox9371]

@@AngelusBrand that makes sense

[@alicetippee2330]

Liquidkicks is an awesome finisher. They recommended Angelus paint to me with their finishers. Best Combo EVER!!!

[@neuronadelka5721]

No sabía que Luisito comunica hacía estos vídeos 😂😂

[@lames638]

Omg I wish I watched this before I did it cause I did both shoes with hearts and the hearts started pealing off

[@AngelusBrand]

We're sorry to hear this happened! We're hoping to find a solution for this sometime in the near future.

[@notorious_osvin1489]

What do y’all do with the shoes?

[@jg.1510]

Just curious, what did you do with the dye in the bucket after filming?

[@DiegoHenrique-ix5ok]

Probably drank it, blueberry taste

[@trollface391]

Rubber spray paint should definitly bond to the plastic

[@gagonggamer]

you haven't use the hydro dipping technik

[@AngelusBrand]

In this specific video, we are trying our brand products. I believe there are some videos that showcase that technique!

[@SgtInvictus]

This whole video is an ad for angelus stuff

[@AngelusBrand]

We do create these videos with the intention to promote our Angelus products while simultaneously educating our customers.

[@ashleygmanning1854]

Acrylic paint pens stick best. Yw

[@jacksonkelly932]

I did a pair and sealed it and everything but all the paint chipped off tostato bummer because they looked sick

[@AngelusBrand]

Yeah, as we suspected unfortunately.

[@amyx231]

Alcohol markers. Fading yes. But it’ll color. Don’t let it get wet.

[@luisfilms]

Mmmmm

[@canttouchme4665]

You look like a mexican youtuber Luisito Comunica hahaha

[@cv.designz]

What about sharpies?

[@bryanphillips5391]

Sharpies look nice but in my experience, they tend to fade and wear out over time.

[@tamiepetersen801]

My Sharpie colored croc-style shoes have stood up well to at least 2 years daily wearing. I recently touched them up. They did look brighter again but I really hadn't noticed how much they had faded without the comparison.

[@GuyHesoo]

Luisito Customiza

[@jojana777]

Could do some custom splash..😉😎

[@Soyyboricua]

What about sharpies

[@justineharper3346]

Will sharpies work on crocs?

[@AngelusBrand]

Definitely something to test out. I would think the colors would become different after time.

[@AquitoyNM335]

No

[@tubechic71]

Were the white crocs sanded first?

[@AngelusBrand]

We did try every which way!

[@tubechic71]

@@AngelusBrand wow.

[@karacrushton1634]

Why wouldn’t you use Angelus 2hard ?

[@AngelusBrand]

Hey there! Angelus 2-hard is only recommended on materials that are rigid and will not be flexing much

[@itsticktock4980]

Brooo I’ve been customizing crocs for a year now

[@ashtonmccoy6588]

And what did you do differently?

[@mr.kustumz4748]

Ashton McCoy he just running his mouth. That's why I stay clear or let my customers know what will happen if crocs get painted

[@itsticktock4980]

@@mr.kustumz4748 sheesh! The hostility! I just think it’s cool that a content creator published something like this. I wasn’t trying to “run my mouth”

[@mr.kustumz4748]

No hostility just saying no need to post nonsense under a video that's actually showing that it's not possible to keep paint on rubber..

[@AngelusBrand]

We hope that someone finds a way to do it! We think even if it looks good for a while most things will fail. Part of the reason you don't see multicolored custom car tires. Just white walls that are made with white rubber.

[@minuisssb258]

Did you mix the paint with too hard ?

[@minuisssb258]

I painted crocs, yes they do lift but too hard helps them last a bit longer

[@sickle1170]

Try sanding 💪😎

[@RamzyMulla]

Bro I done customised my crocs and the paint didn’t last 3 months 😭

[@AngelusBrand]

😭😭😭 noooooooooo!!

[@thomiibeengay6705]

Maybe normal hydro dipping would work 🤷🏽‍♂️

[@AngelusBrand]

It would, but that is almost like a film. We wanted to try our products to see the results.

[@gaoutkast5847]

I HATE CROCS.....Ok...I got that out! On missiles and other things I heard clear Flexall the As Seen On TV stuff has this covered...and unflaky!

[@Wahiawa786]

crocs aren’t made from rubber btw

[@kleemanjad]

What about gshock lol..

[@tabletordenador4184]

Ostia luisito

[@thatsalisha_]

firsttt :)

[@CHENECOU]

Que hace aquí luisito comunica 😂😂😂😂😂😂😂

[@bFOURdwZEROlf]

24 hours dye

[@Por_amoralarte]

Luisito comunica custom

[@Szechaun_Don]

Having started the vid just wanted to say....it's impossible