I can’t even drive yet 😂 but when I can I’ll deffo be getting a SEAT Ateca . And I can’t wait to do mods on it 😍😍😍 The side splitters look bloody epic
@AzarnPatel3 жыл бұрын
I’m glad to hear you will get a SEAT! If I can ever help with any modifications do let me know I look forward to giving you any assistance ... also thank you for your nice comment about my splitters 👍☺️ please show me some support and subscribe to my channel it will really help me out 🔴
@corvetteposse77173 жыл бұрын
Nice-really changed the look and stance.
@AzarnPatel3 жыл бұрын
Thank you I'm glad you noticed!
@lloydhopwood43313 жыл бұрын
Love this mate. New to your channel but I'm getting a Leon Fr in the next couple of weeks. Defo gonna do this to it.
@AzarnPatel3 жыл бұрын
Thank you for watching ! Hope you subscribed ! 👍
@lloydhopwood43313 жыл бұрын
@@AzarnPatel - Certainly have mate. 👌🏻
@rabkhan22963 жыл бұрын
Another quick question mate, what size self tapping screws did you use, and how far in cm do your skirts stick out from the sill?
@AzarnPatel3 жыл бұрын
15mm self tapping screws
@ThrottleGarage3 жыл бұрын
Nice work.. looks very good!!!
@AzarnPatel3 жыл бұрын
Thank you so much for your comment! Click the subscribe button and again thank you!
@ThrottleGarage3 жыл бұрын
@@AzarnPatel sure did. Follow me back and we can make this happen.
@AzarnPatel3 жыл бұрын
@@ThrottleGarage of course I have subscribed! 👍
@amberclaybrook56532 жыл бұрын
You missed some tape 😬😂 Also do I need to put the seat side skirts on before I can put the extended ones on? X
@AzarnPatel2 жыл бұрын
I know 🤣 side skirts first 👍
@colinblaas35922 жыл бұрын
thats lookin nice, although im guesing you cant just put the screw in anywhere can you?
@rabkhan22963 жыл бұрын
Nice work.. looks really good. How do you decide which way you put the side skirts on and which way is for the front and back?
@AzarnPatel3 жыл бұрын
So on the side skirts there are indentations on them that fit only on a certain side and certain way that is how you figure out which way they go. Depending on them indentations it will only allow you to put It on in the correct manner 👍
@rabkhan22963 жыл бұрын
@@AzarnPatel that’s great, thanks for the response. Keep up the good work 😊
@AzarnPatel3 жыл бұрын
@@rabkhan2296 Thank you and don't forget to subscribe 👍
@adamjohnson68513 жыл бұрын
I have this same front splitter, how strong is it with just self tappers? As I dont want to take the front bumper off and this looks a much more simple way of fitting.
@AzarnPatel3 жыл бұрын
Hi , trust me when I say with enough self tappers this thing will not come off and if it does it’s taking the bumper with it 🤣
@adamjohnson68513 жыл бұрын
@@AzarnPatel thanks for the reply, I'll go with the self tappers, cheers 😊👍
@AzarnPatel3 жыл бұрын
@@adamjohnson6851 your welcome don’t forget to subscribe it will really help me !
@adamjohnson68513 жыл бұрын
@@AzarnPatel subscribed, love your vids 😊👍
@jaygolds80863 жыл бұрын
Do you have to drill into the body of the car for the side skirts ?
@AzarnPatel3 жыл бұрын
For the front splitter i used self tapping screws that go into the bumper . For the side skirts I also used self tapping as they have to go into the body of the car to withstand the force and the wind resistance. 👍 once in they won’t come out unless you screw them out ... don’t forget to subscribe also 🛑 and if you need any further help you can message me via Instagram @azarn_p
@walidaslam58342 жыл бұрын
Hi mate i see that you have condensation inside of your headlights, is there a fix for it?
@AzarnPatel2 жыл бұрын
My condensation was due to a small crack in the back of the headlight … all I had to do was heat seal it up and it would have stopped … maybe yours has the same problem.
@ShedDwellerMakerandRepairer3 ай бұрын
Drilling into the sills with no corrosion protection seems a bit silly.
@afghanniaz19293 жыл бұрын
Does it hit speed bumps while driving? I want to get one for my fr but I think it might bumps while driving 😒
@AzarnPatel3 жыл бұрын
Nowhere near the bumps mate 👍 will be fine !
@rockafellaash21833 ай бұрын
Bro my car hasn’t got plastic to screw in to splitter it’s metal what can I do
@kaysontee3 жыл бұрын
Do the areo side skirt fit the same way?
@AzarnPatel3 жыл бұрын
They only fit one way 👍
@jav58192 жыл бұрын
Where there any rust under the sill?
@dannyhasan61182 жыл бұрын
How much did it cost for the full kit?
@ct68233 жыл бұрын
can someone tell me the song that’s on the first half of the video😭
@User-zz6si2 жыл бұрын
Would this fit a 2017 standard ibiza?
@AzarnPatel2 жыл бұрын
I doubt it due to the length and shape , you can get splitters for the Ibiza though !
@yasqla10553 жыл бұрын
Cool. And after a month there was rust on the door sills.
@Requeh3 жыл бұрын
Cant even understand people do it like this
@asif8018 Жыл бұрын
@@Requeh how do you suggest the best way to do it ? To avoid rusting
@rosswells94053 жыл бұрын
What screws did you use?
@AzarnPatel3 жыл бұрын
With this I used self tapping screws around 10 all around which is pretty solid and holds on really well with no movement when pressure it put onto the splitter. Another option is they can be bolted on but this would require removing the whole bumper and drilling holes which is long winded. I hope this helps 👍 and don’t forget to subscribe 🔴
@rosswells94053 жыл бұрын
Thank you mate gonna get it ordered now
@AzarnPatel3 жыл бұрын
I used 15mm self tapping screws from bnq
@TheCinderellaman102 жыл бұрын
What kind of speeds have you hit when driving in Mexico 🇲🇽 with the splitter installed? I have heard over 120-130 mph in Mexico 🇲🇽 the splitter will come off. Any thoughts on that?
@kotai123 жыл бұрын
Nice, where did you get the kit from?
@AzarnPatel3 жыл бұрын
Here is the link to the kit on eBay www.ebay.co.uk/itm/FRONT-SPLITTER-SIDE-SKIRT-EXTENSIONS-SEAT-LEON-MK3-CUPRA-FR-2012-2016/274648012346?hash=item3ff24c163a:g:3JcAAOSwFR5d8SJT