Custom GFRC concrete vanity top with integrated sink time-lapse from mold preparation through spray up, hand-casting and removal from mold. GRiT Design + Build in Seattle gritshow.com
Пікірлер: 52
@ingalls71764 жыл бұрын
Love watching you peel out what's left of the mold.
@juliansosa21295 жыл бұрын
Quedo exelente. Felicitaciones
@SyddlesFuzz Жыл бұрын
No way, this is the exact sink I was modeling. :D Good to know there's a tutorial out for it now. :3
@chrischristensen76265 жыл бұрын
can you give a step by step and your ratios and prouducts? Came out amazing would love to replicate because i havent seen any other pour come out so light it seems and good. thankyou
@ourpeoplespoll14743 жыл бұрын
Can’t you tell by the chipping he did it all wrong?
@jmidnite1142 жыл бұрын
He did a great job building the sink. Just forgot to put a release on the mold so it would have came right out
@luisvilla95223 жыл бұрын
Nice idea, i wish there was audio, might I ask, what did you spray before the adding ther concrete? One of the comments you said spray lacquer when i look it up the only thing I get is just spray paint lol, thanks
@TheFatbutterpancake10 ай бұрын
Great design for the sink. However, is that standard operating procedure for removal of a mold or did you forget a release agent or is that just what happens?
@VP411Designs3 жыл бұрын
What is the difference between cultured marble, stone resin, polymarble, solid surface and Acrylic composition? What can be considered major positives and negatives for each of these types of bathroom vanity counters with built in sinks integrated in one piece? Are these fabricated vanities durable long lasting, heat resistant, color change resistant, chip resistant and any other item to consider?
@s.esamawi81933 жыл бұрын
You can simply apply a layer of burnt engine oil on the wood, it will not stick.
@virtuaviolin5 жыл бұрын
Excellent video, very ilustrative, congrats. Do you think the face coat could be spreaded without the gun, only with the brush and compact roller? I´m worried about the aparition of holes in the surface of the sink if I don´t use the gun, but I cannot find this item in Spain. Thanks ;)
@mvbentley5 жыл бұрын
Hey Pablo - You can spread face coat by wet brush alone - just start at the lowest point & work up to avoid sagging, but I never use a compact roller on face coat - only sometimes on the gfrc backing coat. You'll probably have a thicker face coat which = less structure & a higher probability of eventual cracking in the face coat. This can be solved (minimized) by increasing the thickness of the backing coat but then you're adding weight. Whether you can do it or not just depends on weight/thickness limitations, length of span & orientation of the surface plane. I could have done it on this project.
@JoaoBatista-yu1xm5 жыл бұрын
@@mvbentley .
@jmidnite1142 жыл бұрын
What kind of cement did you use? I noticed it was a lot dryer the cement then how everyone else makes it.
@bigguix Жыл бұрын
which pigment did you use? black iron oxide? looks good! ratio?
@adriangottau97073 жыл бұрын
hello what material do you use
@LucaBazzica4 жыл бұрын
Great 😻😻
@JH-iz6fk5 жыл бұрын
What was that that was sprayed on at the beginning?
@linniel84334 жыл бұрын
I think they spray the colored concrete on with a drywall Hopper gun
@limawhisky5 жыл бұрын
I am doing exactly the same with doble basin sink. Just wondering what did you use to lacquer the surface of the basin mould? I am aware removing the mould isn’t an easy task. I am just considering to do grooves with the router to ease the removal.
@mvbentley5 жыл бұрын
Enrique - This mold was sealed with spray lacquer, sanded and waxed. You can cut grooves out via router or saw but I press the back coat into the face coat pretty hard and I'm always concerned the the mold will buckle with the pressure. After the troubles getting this mold apart, I now screw all of my mdf molds from the inside. No screw heads facing the poured surface. If it's designed correctly, the mold can be taken apart piece by piece once the screws are removed.
@marianarosaliacuquejo4 жыл бұрын
De cemento?
@Mark-ff8ir2 жыл бұрын
Did I miss the ingredient ratio/mixture? Thanks
@MRmzadz2 жыл бұрын
What are the materials used please?
@emilkarlsson93872 жыл бұрын
Thanks for the inspiration😀 You don`t need any steel reinforcement in such a sink?🤔
@mohammedsufyan40112 жыл бұрын
Not for gec
@mohammedsufyan40112 жыл бұрын
GRC*
@electronsmove2 жыл бұрын
Mold release / wax? Foam?
@mauriciogonzalez63025 жыл бұрын
What kind of compressor did you use. I have a small 4.5 gallon Rigid compressor that I own but I’m not sure if it puts out the right pressure to operate the hopper gun. It puts out 5.1 SCFM at 90 psi.
@bradleyo20985 жыл бұрын
You need minimum 6cfm for a hopper gun like that. Really need a 60gal compressor also.
@leonardoantoniopavonvasque43673 жыл бұрын
Esta muy bonito el diseño pero muy mala técnica para retirar la madera , debe de usar algún tipo de grasa para que la madera se despegue o suelte de manera fácil Saludos
@yahoooooey33254 жыл бұрын
Какой рецепт раствора?)
@julianafaustino98042 жыл бұрын
Qual o nome desse acabamento preto????
@fortainlacuspide4004 жыл бұрын
Y donde está el audio 😶
@santiagojuan41655 жыл бұрын
Y donde van las llaves del agua????
@mvbentley5 жыл бұрын
The faucets for this sink are wall mounted
@simonac688.5 жыл бұрын
must be an easier way to get rid of the mold...
@limawhisky5 жыл бұрын
I was thinking the same what about doing flash grooves to ease the extraction ???
@stephenlott69683 жыл бұрын
Acetone dissolves foam. That might be easier, once the big parts are removed. Or could the foam part just be melamine like the rest? The concrete seems to come off that pretty easily. Is there a reason people use foam instead?
@joanh73584 жыл бұрын
Te quedó de cojones, enhorabuena
@marianarosaliacuquejo4 жыл бұрын
Si le ponías sinta de embalaje salía más rápido
@elbomberoplebegp3 жыл бұрын
Así es lo mismo pensé.. O aplicarle un spray desmontante...
@criselias14774 жыл бұрын
que es la pintura que le aplica
@julianafaustino98042 жыл бұрын
Também desejaria saber...
@mvyuski99852 жыл бұрын
X3
@matthewfox37604 жыл бұрын
Foam.
@tayebboussaid71704 жыл бұрын
must be a big pain in the ass peeling the would out, must be an easier way.
@astragrey31283 жыл бұрын
Gianlucca Vacci congratz
@user-mm4td6pg5r3 жыл бұрын
Что это такое чёрное??????
@juliocesartorres19923 жыл бұрын
Un desastre el vídeo no explica etc.paso
@SVdesign4 жыл бұрын
Amazing content. Let's be friends?
@hassanhadi83254 жыл бұрын
Very good work but the digging that you did to replace the mold excuse me its gust bullshet this digging need a professional person only so if you want to make a possible video for everyone you need to change the way for making the middle mode