Custom Go Kart A Arm Jig ~ IRS Buggy Ep3

[@F5Tornado44]

A couple of good tips on fabrication. #1 Always pull the cut when using a cutoff wheel. In other words, the sparks should be spraying towards you as you cut in the direction the sparks are going. You'll never bind and/or break a disk that way. #2 Turn down your "post flow". It sounds like you have 2 seconds of post flow after you stop a weld. That's going to eat up a lot of gas, especially when tack welding parts. .5 seconds or less post flow should be fine for steel. Trust me, you'll save a lot of $ in wasted welding gas and time to go and get your tanks refilled. Keep up the awesome work guys. The build is coming along nice.

[@ians1464]

I'm liking these last two videos love the detail and the craftsmanship you guys are going to become legitimate no little backyard go kart for you guys anymore

[@ronniepate4315]

I like it a lot. This thing should be mass produced. Get ur done guy's.

[@seansysig]

Great idea maki g a jig. It keeps the heim joints on the same plane to minimize misalignment that would create binding and squeaking.

[@vinnyvega1985]

You should definitely produce a bunch of these and add them to your merchandise store. I bet they’d sell like hotcakes!

[@toddbob644]

Love the videos! Watching from British Columbia Canada!

[@keithgrant3929]

Camera work is awesome, great Miss Redbeard.

[@pa6390]

Nice welding..

[@marvicty]

RBG A-arms, put me on the list to buy some. Also, your brother needs to be in more vids with more speaking parts. One more thing, When welding up those A-arms, there needs to be small breather holes drilled into the tubing. That way you can finish up the welding and not get those pin holes/splatter at the end of your weld. I know you guys probably know this but I just didn't see it during the A-arms fabrication.

[@spicydeath82]

an idea for a semi auto oiler for both the band saw and the tubing notcher would be to pick up some plain white felt, make a holder that holds it against the blade and the hole saw. just oil the felt at the beginning of the day before you start fabbing and it should help extend the life of the blade and the hole saw. just a thought.

[@rexmorgan72]

Stick with one project at a time. I love the project.

[@jTone40]

I wish I was closer to you all. I would definitely donate some time for you guys.

[@michaeldiapoulis3600]

Almost forgot what is the distance between upper, and lower a arms. I am in the process of building my son a off road cart. Thank you and GOD bless👍👍👍🙏🙏🙏🙏😊😊

[@samwestoby140]

I like the way you work smart

[@supersport1986]

Love the jig I'm going to be building my golf cart into a 4wd and it will have a 6sp manual trans haven't fully decided on engine yet but the rest is mostly figured out I'm going to use the jig idea on that project ready to get started on it but haft to wait till the funds are there lol

[@durangojohn714]

Looking Professional RBG !

[@alanfisher4731]

Could you do a video update on your collection of go karts and mini bikes and stuff

[@blakeboothe2554]

Yes please I would love to see this because honestly I can’t keep up with everything he sells and builds

[@starpuss]

*Looks Great!!!!* _I Can't Wait To Build My Shop To Start Making Off Road Toys For My Channel!_

[@mikesanchez2046]

Awesome work champ the jig is a great idea I am starting my this week

[@anggifahrur9585]

Gud job mis

[@brycewood4109]

Hurry up and get part 3 out!!!!!! I can’t wait any longer to see the progress 🤤

[@brycewood4109]

Part 4*

[@iamlonefrog4866]

Make as many episodes as you want... I love me some RBG.

[@fabianmurray7230]

You need to Patten that jig super handy

[@74elsinore]

This is going to be one heavy beast. It's going to need a lot of power. maybe throw a transaxle 4 cylinder engine and samurai axles on it. Make a mini rock bouncer

[@reddragonstacking5247]

I really like seeing a full builds series instead of doing a build video one day then the next video is mini bike stuff. I think that it would be better to do a build from start to finish then do another one start to finish on mini bikes

[@trecedaves3159]

Jig was a great idea

[@clintswindle2460]

That thing is looking awesome keep up the hard work. RBG

[@michaeldiapoulis3600]

Hello really enjoy watching your builds. What are the lengths of tubing used to make the A arms and at what degree do you bend them. Thanks.👍👍😊

[@slickniner]

Keep it up guys!!!

[@robertwilliams3457]

Great videos keep up the great work. Maybe you could put a couple bolt studs on that template. And a flat bar across using nuts to hold the arms when welding. This way you don't need a second pair of hand getting in the shot or your welding?

[@gitlittoo2161]

Sweet guys. Keep the vids coming.. And thank you.

[@suzuki-km7zj]

that buggy needs BIG tires!

[@JacobEcret]

With what horsepower

[@ngk330]

I so wish I could build one of these. I need a good bugout vehicle

[@wheeln24-79]

Really taking your time with this thing. Rather b welding would've been done with this in a 10 minute video. And I hope the motor is gonna be strong enough to push this thing cuz it's looking heavier and heavier

[@rednecktractors10]

I think your confusing rather b welding with cars and cameras lmao

[@davidowen888]

awesome !

[@naptime8043]

What is the 0.000" difference between the tube ends and the tubing that you had to press? Looks like a solid fitment!

[@deetob5408]

You should do a video on a APC MINI CHOPPER

[@wadealbert138]

How do you determine the length of the A arms????? Are the top and bottom A arms the same size??? Great work

[@jameshutchesoniphone4416]

You should make pegs for the a harm jig so you can put it in the table it want move while your welding it was just an idea I thought you might like

[@sethcarsten3875]

Hey Greg, I’m currently in the middle of a similar build, what are you planning on using for carriers/spindles for the front and rear hubs? Building your own or finding a set?

[@exjw8623]

You really should get proper ventilation over your weld table. The long term affects of breathing weld fumes is not a pleasant thing. Love your videos keep up the good work.

[@geddstock]

When tube bending you should measure two points on the ram then when you repeat bend use the same measurement and all your beds will be the Same angle 👍

[@LuchMobGarage]

Love it bud more more more 🤘🏻🐿🤘🏻

[@gagecockerham3584]

Red Beard I have a question. I got one of those China side by sides with a bad motor and was thinking of installing a snowmobile motor it. Something between a 500cc-800cc. This way I get the belts, clutch and maybe reverse. I figure going from the clutch to the axle maybe a issue but do you know if there are any other issues or if the motors just don’t work good in a side by side? Thanks

[@scottstanton8173]

Red honestly do a 5 link system in the back next level that buggy

[@knowbull5hit590]

Walther Smith 5 link?

[@scottstanton8173]

Best bet is to Google it a 5 link rear suspension from a odyssey fl350

[@shanesgarage1105]

That's an awesome jig, also where did you get the pipe notcher

[@MotoKingWOT]

Why wouldn't it work on a 2 seat kart? Also what brand holesaw do you use? Thanks!

[@codymullins2155]

One day you need to do a rzr 1000 buggy build

[@knowbull5hit590]

Cody Mullins whats there to do to an RZR other than add power and bolt on lifts? Those things already do everything

[@hammerT2997]

Hell yeah man

[@SussexProjCo]

Awesome

[@ronnybe7994]

You need to build a leaf-collector...a buggy/leaf-collector :p

[@performancemudmotors]

is this where the blown 670 is going

[@piratenhitshantum3837]

If i have an 4hp kart and i put an 6.5hp on it does it goes faster?

[@knowbull5hit590]

Whats the purpose of the angle to the A arm mount point? Better ride quality im assuming

[@bryceberryracingberry8405]

You should build a mini bike with a modified 420 with a bored out cylinder

[@jesseserfling6807]

I would like to see a long traval buggy

[@breyersmith8876]

This buggy need like a crf450r engine on it , then it would get up and go

[@supersport1986]

What kind is your tubing bender you use for projects like this I see it but cant tell what brand it is

[@matickorez7131]

That's good....

[@lilbill11891]

I hope this badass looking buggy gets a nice power plant. No offense but a 670 just would be a downfall lol thing looks too badass. turbo charge one of the motorcycle engines you listed at the end and throw it on there with dual rice burner mufflers for wow factor lol geared to run 100mph.

[@anthonymazzetta2841]

What engine is this beast getting?

[@bobpaterson5845]

Hey ya red Beard from a Grey beard down under in the land of Oz did you ever get to upgrade a Golf buggy by addin the rear quad bike to the front of the buggy

[@noahwilliams5104]

What kind of steel did you use for the a arms?

[@dmcbuilds1891]

What are you making for reverse?

[@jesseserfling6807]

Does your new welder also do tig ?

[@TannerK._.]

If you were to build one to sell, what would you charge?

[@willtrautman6243]

What brand hole saw do you use and are you happy with them

[@clintswindle2460]

Will Trautman That's what I was wounding they look like they are doing great

[@edmanalves9623]

Very cool, can you pass the measurements of these suspension arms?

[@larryferree2962]

What is a good width for a two seater go kart

[@jacobwilliamson8406]

There are so many dead tubes on that cage

[@sethsanderson6458]

Wooo

[@dylanmoyers6904]

It would be awesome to find a way to make it four wheel drive

[@conner1938]

Where did you get your tubing notcher?

[@supersport1986]

What is the tubing that you are using 1" 1/8 wall?

[@noblebrown7533]

I have a friend who could give a rzr turbo engine for the buggy, like the mini showtime rzr buggy.

[@toordog1753]

Patreon mentioned, bounce...

[@brandensandler3494]

Greg I like the change but I think you should go back to the old music I miss it and when your talking you should stop the music

[@danbergeron1521]

When are we going to see his buggy again I'm interested 😏

[@rocklinbouncehouserentals3650]

What kind of welder do you use ?

[@RedBeardsGarage]

Everlast MTS211SI

[@dallinbrimhall1033]

This better not get a 670 it needs a better power plant than that

[@ИльяАржевикин-д4т]

👍👍👍👍👍

[@hi-techredneck7069]

Yeeeeehawwww!!

[@hrsey71]

invest in an exhaust fan for the garage

[@mikecunningham3423]

You need to put a real deal power plant on this thing not a predator 670

[@performancemudmotors]

ive made a ton of reliable hp out of the china twins

[@shaynegadsden]

I don't see how anyone would see the predator as a good option a heavily modified 670 running flat out can be out done by a stock 450 dirt bike motor plus you get a nice gearbox and clutch thrown in. In something this size something like a gsxr600 would fit nicely and even the very first early 90s model had 80hp stock getting upto 124hp if you can get a late model wreck

[@shaynegadsden]

@@inthewoods5471 what bullshit those predator engines are everywhere and not because they are good or top quality but because they are cheap and easy to fit, as for what "his audience likes" well I watch the videos so I would be his audience also i see many comments suggesting a bike or snowmobile engine for most of the builds so that is just wrong too

[@shaynegadsden]

@@inthewoods5471 it's a recommendation no one said he had to do it just that in our opinion a more powerful engine would suit the build better for most people unless someone is being rude feedback and suggestions are encouraged

[@shaynegadsden]

@@inthewoods5471 you seem to be the one ranting I never said I hated anything just suggested what i see as some better options, cheap and simple motors have their place but looking at this cart I think it would benefit from the extra power which more than a predator motor can achieve and have any kind of life span

[@keithlong3129]

✓A+💯

[@kristophergarcia5330]

Why wont those a-arms work on a two seater?

[@inmotion81]

O a real motor to come do that on this one the hell with the high cc no power motors from hardware stores .the gsx or cbr motor would move this even so a subaru motor is even better

[@fergusonhr]

I got 18 stitches in my leg cutting a kitchen sink in half to make two bar sinks...the wheel grabbed at the end...uhg...

[@citicospeedshop3739]

One day we will know what we r doin

[@dustinmiller7278]

Dang you look like you know what your doing 😂........ Stop being misleading lofl great job guys

[@lipripper3410]

Crf 450 long travel single seat buggy

[@drewalsup9200]

Dont use that wallmart grinder without the shield its an accident waiting to happen

[@NewfoundlandBen709]

You need low and high speed gears, you need a clutch, dont use a predator

[@fearnobeer9077]

Why don't dogs get welders flash , i know you have been asking yourself the same question ,i don,t have the answer either

[@bri2109]

dogs do get arc flash, they just don't whine about it

[@braylinmitchell141]

Yeet

[@masonrenucci6342]

Turn down your post flow on your welder your wasting a LOT of gas😂

[@zacharyhudson5304]

Needs a 4 cylinder motorbike engine not a 670

[@projectsuperstore4049]

Better up the quality of your content buddy! Looks like you lost some patrons... :/ I always liked your videos. I think people like you should get the big views. Instead of those other channels.. You know the ones.. lol

[@howtoguroo2686]

YOU COULD SELL A-ARMS THAT ARE JUST TACKED AND LET THE BUYER FINISH WELDING IT.SAVE US MONEY AND SAVE YOU THE TIME .

[@knowbull5hit590]

How to Guroo it wouldnt really save the people buying it any money because RBG would have to get more for it than what the parts cost. And different people and different frames will want/need different size arms for their intended purpose.

[@DIY-dv7xj]

Your discount code for go power sports dose not work at the moment also the same thing with the cars& camera's guys

[@rednecktractors10]

They got rid of the the discount codes(gopowersports did)