Custom Harbor Freight 5 Drawer Tool Cart Tour

Check out the Working Class Garage Amazon tool store:
www.amazon.com...
Make sure to check out my website and pick up a shirt at: www.workingcla...
You can also find me on instagram @workingclassgarage. Thanks for watching!

[@TeamWagy]

a mechanic that gets the job done without spending stupid money on all snap on. nice to see

[@dannysantos1266]

Organization is the key to life. That box is CLEAN ! Nice job, dude.

[@gering46]

Oh man you’re giving me flashbacks of working for Gm with all the ac delco products and talking about the key recalls

[@TheBeardedJeeper]

Really awesome cart. We recently got a harbor freight in town I need to pick up one of these

[@lockwxxd5270]

Love the cart, but also loving abit of Architects in the background! ❤️

[@workingclassgarage]

You know it!

[@ytTaz480]

Thank you! Just stumbled onto this vid and couldnt even pay attention to the cart! Too busy enjoying the music! But couldnt place it. So I went to the comments to search. Yours was the fist comment! I will now go find them on YT!

[@ytTaz480]

Can you please tell me, referring to "Architects", is that the music playing in the first 3-4 minutes, like the 2:50 - 5:00 minute mark??? And if so, can you please tell me the name of that particular song??? Thank you in advance!! 🤘

[@ytTaz480]

Actually, its sounds like all the songs in the background might be the same artist(Architects). But specifically what is the name of the song at the 2:40-3:30 mark??? Its not often I learn about new music Im not familiar with that I really love but this did it!!! Now, Im OCDing back and forth between this video and Architects song videos trying to find that particular one! But so far all of it is great! Nice cart too dude!!! From one wrench turner to another, GREAT TASTE, Brother!! Sub'd!

[@mariomorey2033]

Outstanding cart setup 👍🏼 very ergonomically organized.

[@MichaelBrown-fv2fz]

I replaced the gas struts on my box lid with 1 inch angle iron to hold it up straight I never closed it either and some time the lid would fall when I moved it around am go to change out my casters as well thanks for the video

[@nathanw1862]

Killer cart and even better music ! Some people just don't know how to jam!

[@PrototypeSpyGuy]

Nice pocket screwdriver addiction!

[@PrototypeSpyGuy]

Great mods! Probably the best and most thoroughly modded cart. Subscribed!

[@workingclassgarage]

Thanks!

[@RedemptionGarage]

Pretty sweet man you should check out the mods i did to my cart on my channel

[@BeerStud]

Thanks for the video, those are some nice mods. Keep the videos rolling.

[@wolfhound1a]

Yup great set up. I like the add-ons

[@Ram2253spd]

For the price the harbor freight tool cart is excellent. Definitely recommend it for techs starting out. I have a Matco Tools one because it was a good deal but no one can really knock the quality of the HF cart for the price.

[@modular_kellogs8023]

I work in a factory and need the solid rollers, having 4 casters makes moving in a straight line with weight almost impossible without looking drunk.

[@galdinomendez7567]

One of the better set ups I've seen

[@workingclassgarage]

Galdino Mendez Thanks!

[@P46345]

I bought the same cart back in 2010 and it has served me well. I never even put the struts on the lid I just hang it down the back and it has never closed on me once. ;-) I'm not into having a sail on a boat or a tool box, there's more than one way to give a cat a haircut.

[@AutobahnDan]

Nice cart setup bro! 👍👊👊

[@scottpearsontoolsmore185]

Great video thanks. Nice setup keep up the great work see you in the next video thanks again

[@shepherdsfleetservicesllc8147]

Nice setup

[@xandersmith9832]

Good video and great tunes in the background.

[@ricochetey]

Nice cart. I like how the music went from some awful screemo B.S. to Steely Dan lol.

[@pn7064]

I like the metal music in the background.

[@uncle_magic123]

Nice work on tool chest/cart

[@relikvijarelikvija3719]

thats a sweet setup man!

[@mooseondaloose1751]

Awesome cart bro!

[@Toolaholic7]

I have the gen 2 cart,did one mod that helped.The lid,drilled upper holes for the struts.Next will be the 2 casters

[@mferrarorace]

I think they make the best carts. No problems with mine.

[@ladodgers666]

nice jams by architects

[@nakian5316]

The white drawers actually looks pretty sick compared to every other boring single color box.

[@workingclassgarage]

Thanks! I love the two tone color scheme.

[@jjr6929]

I'm waiting for someone to grab s bunch of wraps and go Skittles like a VW beetle color sampler....each drawer a different color....make it easy when your under a car to tell a helper where to find which tool...not the blue drawer, the green one....etc

[@charleshunt9217]

looks good

[@jakewilliams9809]

Architects in the background 🤘🤘

[@ZEDNANREHIGH]

This alot better than pimp my ride show.

[@SgtJoeSmith]

when drilling holes in carts and chest like that use debur tool then fingernail polish on inside of hole

[@martinschaffmeir7729]

Great post, cart and tools sir.

[@thechizzler6532]

Bro your the reason trucks don’t give out pocket screw drivers any more lol

[@WalmartBiker]

Ayeee new architects??? Fuck yessssssss

[@Romenite]

Nice job man . Try wrapping the drawers with white gloss vinyl

[@Godzillah]

U keep everything neat just wish my coworker is neat as u. I hate messy coworkers unfortunately I have to work with one.

[@dtnel]

What I don't get is why people buy 1/4 extensions, impact sockets, etc. Are you guys throwing 200 ft lbs of torque down on a 1/4 drive socket? I'll use my 3/8 sockets for that. I break a 1/4 chrome socket snap on will replace it whether it be my blue point or snap on small sockets. Yes I bought blue point as it's cheaper for the small stuff. Now on the swivel extensions snap on makes them as well. Last I checked they were professional grade tools. LOL...... The 3/8 swivel short and long extensions I have are with the pins so they have more rotation without binding as I have a couple pinless swivels and haven't been impressed with them. They bind more than the ones with the pins.

[@billybobbobson5346]

Dale N who has time to waste with a broken tool waiting for replacement? Some of us gotta get back to work. 🤷🏼‍♂️

[@Driven-daily]

Those magnetic socket/wrench holders are brilliant, and the fold-away side shelf looks really useful. It's surprising that you chose to skip shopping-cart steering for casters on all four corners. We've always found the opposite to be preferred, what makes you like all casters?

[@stangman1268]

no it doesn't close in that position I drilled and put my lid the same way the rod will not go in any further it bottoms out with the lid at 1/4 down.

[@BEARDEDYAKIN]

Awesome use of all areas of the cart.. great video

[@donovanhollinger9747]

Thank you for this video i have the same cart ill for sure habe to do this

[@tacsystems5621]

I would’ve taken the gas shocks off to have more room. Looks like it gets in the way.

[@workingclassgarage]

I may do that in the future.

[@Vessekx]

Working Class Garage, move them to the inside, and they won’t get in the way of the tools hanging down the sides.

[@dtnel]

What do you use for soldering the tabs back on the Tahoes? I soldered mine once not realizing it was solder for copper pipe as I do a lot of that as well so it wasn't pure solder. I then got some of the glue stuff and glued it in and it held up about a day. Now I need to clean the stuff off the window side and clean the tab and put pure solder on it before I put it back on the window. I just hope I can get it to solder up good enough to heat. Would be good to know if it does it well enough without heating it then put something over it to help it adhere to the window such as using a glue stick from a glue gun or will them latch to a tab and window if cleaned up really well at first before soldering?

[@workingclassgarage]

I always just clean the surface up very well with some sandpaper and then use silver solder to attach it back. If the mating surface gets too hot or is soldered too many times you'll eventually have to replaced the glass.

[@imbrandon16]

I keep all of my shop welding tools in my gen 2 green hf cart, it's nice for what it is... I like mine, I used to keep all of my mechanic tools in it, but i upgraded to a husky 62 inch or some shit like that, tool chest. it's the all black one, its nice too, I felt crazy spending a thousand dollars on that tool box... I can't imagine spending $20k on a snapon or some other big name tool box lol, fuck that.

[@m.t.v.7934]

LOL - That is about the ONLY way I will ever own any Snap-On tools, finding one in a car somewhere. Maybe used tools I can afford, but new, never. Just too expensive and for what I do I do not not the top of the line tools. I am not a every day car guy so I get it that you and anyone who works daily on cars needs the better tools.

[@JustinDowDIYcentralhighway]

I’m New to Your Channel & Found your Creativeness Impressive. You just gained 1 More Sub! Also, Cool Channel Name!! Let me know if you have stickers for sale! 🍻

[@donovanb4739]

Ha I stay watching your channles Justin I've bounced around a couple of shitty shops. I'm in a shop now that they talk to me and treat me like a human instead of a slave laborer great videos man.

[@JustinDowDIYcentralhighway]

Donovan baker Thanks Brother. 🍻

[@manuelfloressr.9039]

You customized the cart and you don't know if the lid closes.

[@workingclassgarage]

Wasn't really a concern of mine since I never close the lid.

[@steveaustin7214]

Working Class Garage get rid of the heavy metal music I don't care if you like heavy metal music but while you're doing a video homie please

[@MrMatari7]

Not even for the video you tried to close the door? Lol

[@ashtonnuckols2663]

Lol love the song ,

[@pastorslant]

Anyone else think, "Cool. Stop talking so I can listen to the music"? No? Just me?

[@HeyitsJose]

That looks eerily similar to my matco tools service cart

[@uncle_magic123]

What are you using for the mini screwdriver to store them ?

[@skyjac92]

I wondered as well. There is a Matco logo on it, so guess it’s a Matco item

[@chrisleemendez]

Where did you get and side table and do you have the part number?

[@jaguarpaw46]

Your struts are.on backwards

[@ricochetey]

You guys buy your own hose clamps?

[@charlietuna5962]

Yes, definitely nice not having to hear and read the tool snobs forceful opinions! In all reality and fairness, who gives a rats ass what brand tool is used, it's the quality of the repair that makes the difference! Diagnostics is key, and monkey can use a tool, and it wouldn't matter how much cash was wasted on the tool. Me, I prefer to keep my cash, not line the pockets of the pushy salesman. Keep on keeping on man

[@Rudimentary007]

Nice vid. Thumbs ☝.

[@flatratemaster]

You Magnet fetish too I see 😉😂😂😂

[@workingclassgarage]

Flat Rate Master haha! Yeah I do...I love magnetic stuff..

[@joeframer9642]

Where did you get the Milwaukee usb lights?

[@craigmonteforte1478]

Fair enough I apologize on behalf of my comment with the understanding of the reason and THANKYOU fora fast response I am very aware on how much effort it takes for producing your videos and running a channel I am not a hater by any means and I only had constructive criticism in mind with my comment as I find these videos both entertaining an informative to watch

[@workingclassgarage]

Joe Framer Check out my newest video!

[@unprofessionalsllc6273]

really nice to find a great channel that does lots of shop tool testing and pitting the stats against each other! Im here to watch for sure! One day once my business kicks off. Help support a Veteran and head over to my channel and enjoy Comedy and multiple projects!!

[@Crazy_clown6969]

Do those socket things on the back of your toebox have a lifetime warranty like if you break the pegs or bend wine or whatever and what they cost

[@workingclassgarage]

jeremy fickling Honestly I don’t know, I’ll have to looked into it.

[@METALGEARZETTO]

Is that Milwaukee 1/4 bit socket adapter set shorter than the harbor freight set? I have a bit set I got from Matco and they include a 1/4 and 3/8 that’s short. It be nice to have a similar set for home use.

[@workingclassgarage]

METALGEARZETTO They’re pretty standard size, I’d say they’re shorter than the harbor freight ones though.

[@kiyosenl.3889]

It does not close by the way

[@justinfranklin204]

Dayseeker playing in the background?

[@1145theman]

Straight-up stole your paint design. Thanks for the idea boi.

[@buddybrackett9180]

It should shut all the way mine does

[@stephenmacarthur4144]

Wot the part number on them extension plz bro

[@workingclassgarage]

Its E113500

[@workingclassgarage]

www.mactools.com/en-us/Expert/Sockets-and-Drivers/Combination-Drive-Sets/E113500/6-PC-Impact-Universal-Extension-Set

[@the_budget_fisherman]

Does you or anyone in your shop use the battery power hot glue gun? If so, would you recommend?

[@workingclassgarage]

Nobody has one in my shop, our dent repair guy has one but I forget what brand it is.

[@charlietuna5962]

I expect to get some shit for this, but the Ryobi Hot Glue Gun is pretty damn slick. With the 4Ah batteries, I've never had it die on me in a long sit down session, and it takes the larger 5/16" (I think is the size) glue sticks, not the tiny ones. It's definitely worth checking out, especially if you have that battery platform, the "tool only" purchasability makes the gizmo somewhere in the ~$30 range from Depot

[@shawnbutler2779]

Hate to tell ya but I believe harbor freight don’t sell Matco tools little less a tool cart

[@scallen3841]

Dam no comments yet by the tool snobs lol

[@workingclassgarage]

Haha I know right!

[@jordanmilam826]

Anyone notice architects playing in the background

[@craigmonteforte1478]

Box is really cool with all the mods you did Your music in the video Is way too loud and sort of ruins the quality. Of the video my guess is it isnt very loud in your shop. But it is picked up much differently. By the cameras microphones and its proximity. Of the speakers and music source ? I want to add one other comment as. I am a lifelong. Rock and roller and i do personally love loud music in general and my buddies used to laugh at me as i would take naps during band practice sessions by laying down with my head inside the bass drums using the drummer pillows He would. Have inside the The drum to create the sound. He wanted For recording sessions

[@workingclassgarage]

Craig Monteforte I normally have a different microphone and camera I record with but I did this last minute when I wasn’t slammed with work. I was trying to drown out the music over the intercom with my music. The audio wasn’t the greatest in this video but it is what it is, sorry it ruined the video for you.

[@chemo523]

What song is that in the background? 2:00 is it bring me the horizon?

[@alexdao907]

It's Architects

[@deepsquat600]

I went to look up the spare tire tool kit ..no go ...ends up it is NOT a Stillman ... it is Steelman ... potatoe patatoe :)

[@workingclassgarage]

deepsquat600 my bad haha that’s just how I say it.

[@whatfreedom7]

I had a coworker who bought one and his lid opened fully.

[@TylerTickler]

New models were redesigned to open the full 90°

[@tfr6]

28 snap on fanboys disliked this video.

[@SgtJoeSmith]

in arkansas you just expect all mechanics to be druggies

[@movaughn20]

Just ran down to HF picked up a 5 drawer with 189. Coupon and coupon #64590322 good till 1/15 for free side tray with cabinet purchase. I was polite, and they did an over ride and got both for 189 out the door. White in stock. Heads up there raising the price on 5 drawer $10 after the 1st...

[@niteninja0133]

I work at a gm dealer and ive never once needed a hot glue gun ever. That gm rust spray crap sucks Donkey balls fuck that garbage. I refuse to use it. I buy my own PB blaster and use that

[@craigmonteforte1478]

Nice job on the cart FYI Your camera microphone picks up everything even just touching the tools especially with the radio going it gets hard to hear clearly what you are saying it’s funny about your grease injectors making you look like a druggie I’m a retired Woodworker and my company specialized in hospital and Doctor offices whenever I could get “free” hypodermic needles I would grab them to put in my toolboxes why I could dilute wood glue and inject it behind Veneers without leaving any signs that a repair was made in that area of course it was always new needles we got and plastic syringes they used to flush saline into cuts and wounds to sterilize the area those have a curved pointy end on them way bigger than the needles yet they were still helpful for getting glue into unusual places without making a bigger mess than you needed often glue residue will show up when you need to stain or finish that area and that isn’t very professional looking

[@enriquepina7054]

This video is not about the tool cart

[@bo4638]

Been nice to watch without the background garbage

[@aitf99]

Music in the background dude👎👎. I watched until 1:12...

[@workingclassgarage]

Sorry, noisy shop.

[@Mmartinez4774]

I agree sound like Nemo music lol Sorry I mean sound like noise

[@1978garfield]

The whole cart was probably less than the down payment on a Snap On one.