Custom Internal Shaping Bar Part 2

[@gecko8808]

ADAM: this video is a perfect example of why Im a faithful viewer. It has everything: speeds, feeds, and how to tips and techniques. Another exceptionally well done video. Thanks

[@davidedwards9260]

I watch all your videos. You are a really great teacher/instructor. You tell us both how, and why you do things the way you do.I just want to say thank you. Even though i don't have a working lathe. It's very nice to get the basics from you. I really enjoyed the GE large shaper videos. They were really good, and informative. I also enjoy your bolt removal videos. You are so good at taking them out. Keep doing what your doing. I will be watching. Your channel is my goto channel. Thanks Adam. Your Videos are Awesome.

[@metricstormtrooper]

I can waste hours watching your videos, but it defiantly isn't a waste, I have learned so much. Thank You.

[@Quiccc]

You should look up Castrols Hysol SL 36 XBB water-soluble cutting fluid, We had a major fungal/bacteria infection in our horizontal cnc pallet mill, where the fluid would foul up in mere days of the machine sitting still with an aerator going, We called our castrol rep and asked for assistance and he came, did some tests and switched us to the aforementioned cutting fluid, the machine had a downtime of over 2 months and when we started production again the cutting fluid was as clean as the day we mixed it and poured it in the machine, another positive about it is that it has no biocides in it and it doesn't form any formaldehyde over time.

[@yambo59]

Great Adam, making your own high quality tooling must be so satisfying -- "And in this wing of the facility we have the popular Adam Booth exhibit - please do not steal the chips ladies and gentlemen, souveniers are available in the front lobby" lol

[@jeremydornbossjames1732]

I love your enthusiasm and dedication to quality while still enjoying what you do. Another nice project Mr!

[@Lucky_2847]

I'm am so glad I found you. I'm a welder and fabricator in my career. Basically a mill right and you are the machinist I wish I could be...lol love your content. Thanks

[@Mitchiedean]

You should get the punch set out and put the date on the faced end of the bar that will be inside the clapperbox. That way you can always look back down the road and know you made this mod in 2018. 😁👍

[@BDMcGrew]

Never get tired of seeing the ol' Monarch!

[@MaturePatriot]

Great work with a tough material. Having the right equipment for the material makes a big difference in a shops abilities. Can't wait to see it put to use.

[@tobyw9573]

Lots of blue chips despite the flood coolant, whatta force of nature that Monarch is!

[@chemusvandergeek1209]

"Like it was machined for it..." made me chuckle.

[@tabaks]

If you add just a long enough piece of copper wire into that rubber tube, you may have yourself a "stay put" setup for your thread triangle gages.

[@Ddabig40mac]

Excellent idea!

[@eskoilola1320]

Adam, Thank You so very much. Your presentations have been a great source of inspiration and have encouraged me to finally get my hands dirty with a 63 year old Schaublin VF-51 milling machine. I have so far thought that precise work needs small and delicate machines. What I have learned is that this is actually not the case. Although that 1 metric ton cast iron sculpture is going to take a lot of precious space I am convinced that it will be a good deal after all. One more time, thanks for sharing the massive amount of information.

[@johnmacdonald6201]

Great video, love that 6 jaw, it may be my imagination but the lathe actually seems to be running smoother and quieter with this chuck, and the the music that you added in for this video is spot on.

[@felixar90]

Probably because the air chopping noise is higher frequency now.

[@jlucasound]

Watching machining by Adam is to me like watching Disney when I was young. Fascinating.

[@afnDavid]

It's so nice to have options when you go to make something :)

[@91fox35]

Every time I see your videos I wish I had a lathe, I’d mess with it making things every day just for the fun of it👍

[@ericbeckers2673]

That Monarch lathe is a beast. Great content Adam. Greetings from the Netherlands

[@Wolfy_80]

Its always fun and educatening to watch your vids Adam :) Realy love how clean you keep your shop, so much more fun to work in an area like that :) First time for me seeing a 6 jaw chuck and it looks and works great :)

[@richarddechau4200]

Nice job, Those carbide bits are awesome. and the new 6 jaw chuck,I need to have one of those. Thanks Rick

[@Neptune730]

Oh look at all the pretty blue chips. I always liked seeing those when I was a machinist. Nice finish!

[@fredfrog007]

Nice one Adam. Always enjoy watching your videos.

[@robfinney9289]

The Monarch throwing all those chips is like machinist porn! I couldn't look away. Great shots Adam.

[@wheelitzr2]

The squeal gave it away, as soon as the first tool bit hit that end I knew it was stainless.

[@jeffryblackmon4846]

You make it look so easy!

[@johnapel2856]

Yay! Using the new 6 jaw. Thanks as always.

[@jackjumperx4441]

BEAUTIFUL chips. Straw color at the cut, blue in the pan.

[@brosselot1]

Just awesome. Great video. Thanks for sharing Adam.

[@bxmachine]

Amazing work Sir, a joy to watch.

[@afnDavid]

Maybe one day we can get Adam to demonstrate how to cut a multi-start thread.

[@jonka1]

Now that's a good idea.

[@simonhjalmarsson8523]

Always good stuff when a new video pops up :) Greetings from Sweden :)

[@Foster1308]

Thanks for the tip on the way oil, Good to see the old girl work.

[@Godzilla032]

Thanks for the video Adam 🙂

[@fergusonhr]

You indicated that almost as fast as I would have...Nice Job...😎 I'm so funny...you are very good at that

[@shawnmrfixitlee6478]

Adam , your looking so great.. Not sure what yur doing but AWESOME . I love that ole shaper .. Can't wait to see internal chips man .. ENJOYED .. THUMBS UP !!

[@SteveSummers]

Be awesome to see that bar in action. Nice video Adam, I could not have left that saw cut either :-)

[@MrLembnau]

i was hoping you would use the 6 jaw to turn it, you kinda did so its good to see it used. great video.

[@bkoholliston]

Not very popular but I like my thread triangles! Great to see you using them.

[@bigfred1696]

I really enjoy your camera work.....great videos

[@a320214]

Thanks for the trick with pitch Triangles !!! i'll make two right now !!! Thanks a bunch !!!

[@JamesDedmon]

Quick tip, when you change your coolant put a bit of Pine Sol in the coolant, it will keep the coolant from getting rancid. Since you don’t use it daily it get that way. I actually put some in my cool mist bottle for the same reason.

[@newlifeforvintagewatches2732]

Great full length video. Thanks ABOM.

[@jcs6347]

Never seen thread triangles before, make sense. thanks for sharing.

[@sergioricardopereira]

Really nice work...you make look like it´s simple and a natural thing working on a lathe. keep that videos coming please... Regards from Portugal

[@jerrycoleman2610]

Adam, great video looking forward to the upcoming videos on the G & E Shaper with your new tool.!.!.!. Thanks for sharing.!.!.!.

[@izzynutz2000]

That 6 jaw is a nice gift and addition to the shop.. I used to have people give me stuff over the years or pick up stuff at the auction but never anything like that

[@danielesilvaggi]

Nice workbench you got there nyuk nuyk nyuk.

[@zeke1eod]

Awesome video, thanks for sharing. "Like it was machined for it" I almost spit coke everywhere when you said that...God bless

[@ThomasEJensen_TEJ]

I had a nice time again, you're like old faithful. :-D

[@Thewaldo12345]

My shop is getting more Abom friendly every day. Got a UNION boring mill this past year along with a Pratt and Whitney vertical shaper. Just ignore the CNC mill and lathe lol. Just me (37) and Dad (67).

[@felixar90]

Time to use the hardness testing kit you just got?

[@aarongossage5064]

Love the videos. Always learning stuff from you.

[@shortribslongbow5312]

Good video, thanks for sharing.

[@tomoakhill8825]

Adam says, at 20:35 , "Can't leave that saw cut on there. Henh henh." This is the mark of a true master. He says, "Just cleaning it up at 21:30 as the tool on the lathe does just that.

[@douglaspierce316]

nice table

[@robertkutz]

Adam nice work.

[@dtimboggs]

It would be nice to see how you maintain your shop. What does it take to clean all the chips from the work area. Also what happens to the flood coolant.

[@rickbrandt9559]

Under stated,marvelous.

[@StreuB1]

Is it strange that when Adam pulled out the lead knocker and said said "bump it around," I said "tappy tap tap" just like AvE does. HAHAHAHAH!!!!

[@donjohnston9554]

That corkstuffer got me saying Tappy tap tap every time I pick up a bejeezless hammer. 👌🇨🇦

[@robertlee9395]

I used my alcohol container. Tappy tap tap!

[@magnusklahr8190]

Informative as usual.

[@danmetzger5583]

Great video Adam! Always my #1 favorites. Looking good man. I am visiting Brad Jacob on the 4th AND attending Mr. Pete's Meet-and-Greet on the 14th. A little birdy told me there are more than 80 signed up as of 2 weeks ago. I can't wait!

[@userwl2850]

That sounds fun.

[@alexcrouse]

Wish my lathe chuck turned like that! My '39 South Bend 16" has babbit bearings that are trashed from a hard life.

[@mikenixon9164]

Nice work good video.

[@jankjensen222]

Nice video as always adam. I would like a followup video on how you clean the lathe. My concern is coolant?

[@LabRatJason]

Hey Adam, have you ever considered putting some kind of spring steel inside the rubber tube on those thread triangles? I'm wondering if making it into a horseshoe type shape would help hold them on for ya.

[@MaximumDistortion2]

Hey Adam! I just wanted to know why you don't use your lnmx insert anymore. The chips were so beautiful!

[@bryanhedstrom7071]

Miracle of time? You must watch the BBQ Pit Boys!

[@ChrisB257]

Beautiful! Wish I could turn my 10-45 to the same standard.:)

[@nwbackcountry5327]

Awesome! Thx Abom79.

[@Cthowell91]

you should put an air pump and air stone in your coolant to keep it moving and not sit stagnate. might help you with coolant longevity.

[@brandontscheschlog]

Very cool video. I think you just came up with an awesome idea as a video and that is determining mystery metals. What makes you think this is stainless? Do the chips not have any color to them? I recently ran into a similar issue where I thought what I was turning was prehardened steel but IMO was stainless but I am no expert so I think with your experience this would be a great video. I know you can never guarantee what any particular material is but with your knowledge we could have a better idea of what we would have based off of how it turns, the kind of chips we get and the finish we are able to achieve. Thanks for the awesome video

[@terryshumaker9686]

L

[@raincoast2396]

"Just like it was machined". lol Too much fun.

[@stefanpariyski3709]

I don't understand why the stainless was an issue? Was it because you wanted to save the material for a more special part or does it have to do with machinability?

[@merlinmagnus873]

Rigidity for the most part. That cut that sounds like a stuck pig usually means high nickle content. That grade of steel is "gummy" and soft. Looks pretty but lousy for tooling.

[@jerrysayers1516]

Hi Adam I am not a machinist but stumbled across your channel a while back and All I can say is WOW you do great work. One of the things that impresses and amazes me is how you can take a chunck of metal some times a little rusty in places and turn it in to a beautiful brite shiny functional part for somebody. Also you conmand of mathematics amazes me as some times 2+2 does not always equal 4 for me lol. The way you throw around those measurements in thousanths and fractions of thousanths is inpressive. Now a question that has nothing to do with your work other than the very good videos you make . What editor software do you use ? Thank you Jerry

[@michaelennen3432]

Shall we? We shall!

[@bcbloc02]

Like it was made for it! Imagine that! lol

[@inmyshedwithbc.]

Hello from Aus. You could cut the tool bit square with the shaper.

[@steveschott4566]

I love your perfectionist side. 🤓

[@joepalazzolo4630]

Outstanding...

[@nate2569]

How do you clean up all the chips from your lathe? It's got to be a pain. You just vacuum everything?

[@John8.7]

Nice chips!

[@hornetobiker]

Examplar of a wizard.

[@TheDistur]

That's a big ole chunk of SS. Gotta be worth a few bucks.

[@hmshopfix6283]

Adam, Would it be OK to use the threat pitch gauge to measure the depth? Is that accurate enough or is the TP gauge just for "counting" threads? Regards, Eric

[@ypop417]

No, Because you may have a larger or smaller diameter and the thread gauge will still show it perfect.

[@Peter-V_00]

Glad you ditched the SS for the 1045, many don't realize how soft SS is..

[@darkmann12]

Beautiful chips!

[@m-s-a-g]

Nice man 👍👍👍👍

[@jhensjh]

Well Adam now you have a scrap of stainless sitting around for when you decide to build a nice rotisserie for your kamado, haha.

[@williamlewis5326]

"one good rap is worth all the indicating in the world".

[@Scootermagoo]

like the change in music.

[@mashed-out]

So...that sure is a biggg shiny ROD you got there Abom!

[@yanwo2359]

What has changed with the ads? I used to get one at the beginning. Now I'm getting several interruptions during the video. Is this on my end, or did Adam change something?

[@arnljotseem8794]

Me too. Guess youtube is promoting their new ad free Premium subscription by slapping more commercials on you.

[@joshcrd7925]

Premium is not new, its just a new name. Was called youtube red before.

[@jmh8743]

music +10 pts

[@donjohnston9554]

I still like the SNS music tho. 👌🇨🇦

[@Abom79]

Thanks James. Don, the SNS music is for SNS, I use other music for all the other vids.

[@MrNubix]

Would you happen to know the name of the song? I really like that one.

[@jmh8743]

sorry nope

[@John8.7]

Nice Chuck!

[@katawatenshu]

what is with the intermittent rate of chips coming off around 10:20 the coolant flow seems steady so it's a little odd

[@felixar90]

Stick-slip in the power feed?

[@katawatenshu]

It's not affecting the finish so it shouldn't be something too extreme, possibly just the grain of the metal at that point in the shaft or most simply just cutting vibration causing the chip to break off longer or shorter. sure got me curious though

[@TheMetalButcher]

Just the way the chips work. Basically it is just barely curling past the cut edge and breaking over against the toolholder. Sometimes it catches on the workpiece and pops up into the air. The next chips are still connected for some time to the previous until the break, so when one pops up, they continue that way until one finds its way around the workpiece. If you watch some of his videos from work they will do that a lot, and make quite a loud popping noise when they rebound off the work.

[@hodgepodgeenginerd1258]

Thanks for the video abom. Im looking to start purchasing some equipment of my own. Do you have any tips for locating a good deal and what to look out for when buying used machinery?

[@jeffkeller1669]

I've seen a three jaw, and four jaw, but I've never seen a six jaw chuck. That's a new one for me.

[@xenonram]

Yeah, they have chucks with as many jaws as you want. There are some large vertical lathes that have chucks with 20-50 jaws on them. The most common are 3, 4, & 6 jaw, but there are 8 jaw chucks too.

[@jeffkeller1669]

Andrew Delashaw..... I don't have much experience on a lathe, but that's interesting. I'm a mill man (Bridgeports) and a cnc operator.

[@susanbarbier5053]

I want the SloMo guys to film this super up close.

[@richardwigley]

Is there a reason that the steady rest uses left hand threads?

[@kstricl]

I was wondering that too, then realised that the supports thread into the adjusters vs the adjuster threading into the support, like I think we were both expecting.