Custom Lightweight Carbon Bottle Options for BSA R10 & R12 CLX

Available here: spares.bagnallandkirkwood.co.uk/
Overview of the lightweight carbon bottle options for the BSA R10 and R12 CLX air rifle

[@thomasbuckley34]

Very useful video. Thanks for the info which you have provided.

[@jeffhello1444]

Nice one, a very useful video 👍👍

[@bagnallandkirkwood]

Hi Geoff! I never directly compared the Chinese bottles with the Inocom (South Korea). I really didn't expect this level of difference. As you probably know carbon bottles have aluminium core - i'm guessing the Chinese (BF) bottles have larger alu core....

[@adarshpb8895]

Will best fittings bottle work in fx maverick?

[@kylejones5818]

When purchasing the carbon bottles from your selves do they come with the valve fitted to the bottle or are they separate please

[@javierignaciogodoyalacon6690]

Good morning, what thread size does the coupling for the air tanks have on the BSA R10?

[@johnludlam6831]

It there any upgrade bottles for the super ten??

[@keesdane9687]

i have buy a second hand BSA R10 but how i can find out how old is this airgun its the MK2

[@mov130p]

How much lighter is the BF 300 to the std BSA 280 bottle ?

[@bagnallandkirkwood]

Its not, BSA is around 40 grams lighter than the BF 300. Strongly recommend the inocom options if actually want to save weight

[@dhirsty1]

Can you put the M18 X 1.5 short one non extended on the carbon bottle and fit it to the bsa r10 ???

[@bagnallandkirkwood]

@@dhirsty1 No it hits the stock

[@peterprice5896]

Can you please help I got a as new r12 clx pro and a week later I bought a best fittings 500cc,so I burped the original bottle and removed it ,I then got the 500cc best fittings bottle put a small amount of silicone grease on Oring cocked the rifle fitted the bottle and charged from my full 3litre best fitting charge bottle and it only went up to 150 so I removed air line after bleeding opened the valve and it went up a little bit more, anyway I kept on and got it reading 200 then I dry fired and the needle went down a third with just one fire can you tell me what is causing this I put the original bottle on and it’s fine so I’m at a loss PLEASE HELP🙏🏼

[@bagnallandkirkwood]

Hi, please contact us at [e-mail] with your order number and one of the technical support staff can run you through what needs to be done. Best Regards

[@peterprice5896]

@@bagnallandkirkwood hi I did not buy the bottle from you guys but your KZbin video certainly got me interested in getting one I’m reaching out to you guys because you seem to have limitless knowledge of these items so I’m hoping you can help, I will say I follow your Chanel and watch it quite a bit.

[@bagnallandkirkwood]

@@peterprice5896 I would recommend contacting where you purchased from as they should have a duty to provide technical support for the products that they sell