CUSTOM PAINTED MTB BUILD.....CRAZY!!

[@olliehoward5775]

Did i really just see Harry Main clean everything on his bike😲 The bike looks Sick mate what a awesome build 💯

[@Kaelan_Bell]

Proper sick build

[@NemosLost0.0]

Bro don’t use copper grease!!It will act as a grinding paste and decimate the bearings in record time....

[@KingPintJuli]

Copper Grease only for Titanium screws

[@ianiscaratti4924]

wrong

[@Luke00722]

Those are sealed bearing though so I doubt any of the grease will make it in, it's just to help it sit in there. If they were loose bearing of course that would be the worst.

[@Fabiavrs]

You should get your roof spray foamed will keep away the condensation and will keep it warmer

[@nosreuter]

Hey Harry, a lot of KZbinr's are animated, but your just so stoked on bikes it's all real, and I LOVE IT!!!

[@dannystarkridesfixed]

Harry’s word of the for the video: “lovely “. Looks like a fun build an love the colors. Dig the purple grips. I ordered a new bike Thursday morning and it came on Saturday afternoon around 1 pm (nice suprise it came that fast but it was shipped on Thursday afternoon coming from Southern California to Northern California which isn’t always that quite can vary). But loving it so far an the gear ⚙️ ratio is the dream.

[@warslash1925]

loving the colour of the bike, looks very professional. Keep the vids up man!!!!

[@louieions695]

can’t wait till this guy hits 1m he is so grate full for what he has deserves everything he has

[@jakeherring3260]

grate full

[@frankiemazzei8882]

@@jakeherring3260 lmao

[@frankiemazzei8882]

I swear he used to be on 1m when he did bmx but when he switched to mtb he lost half his subs 🤣

[@angusporter3239]

Sick colour for the DJ bike you should also get halo h blocks for it And are you going to built the DH bike up again it was sick

[@jackellis192]

Hey Harry the nardo grey also is on lots of the Vitus bikes on wiggle and chain reaction cycles. It comes on the mythique and nucleus which is as much as I can remeber

[@ethanwells8873]

evening harry hope covid is treating you right i just want to say a massive thank you for the stickers that turned up friday i have now put them on my bike. i am so happy to have something that you are part of and will always be a loyal sub. so glad you are here mate i have learnt so much since i have been watching you you a god.

[@harrymain]

Thanks a lot Ethan brother

[@steveburland624]

That is the best bike build you have ever done turned out great when you have got the right workshop then anything is possible.

[@milktrader]

I haven’t anticipated new episodes like this since Game of Thrones! It did not disappoint and I’m now seriously considering starting to drink tea!

[@bashredies8127]

The nardo grey looks so clean but personally I think if it was murdered out black with a couple chrome pieces it would look so mint, and I get your repping your owna brand which is sick but the clean frame with no stickers looks pretty nuts. But the build was sick to watch and the bike looks insane.

[@67johnpaul67]

Love the videos Powder coat = sandblast, powder sprayed on, cooked at 1200 degrees Fahrenheit in an oven Electrostatic coating uses a charge, no oven

[@sixtysecondsofstephens2386]

It looks mega, great colours. Think you'd of been better off with normal grease not copper slip. As that's for nuts and bolts to stop them seizing up like on the wheel of a car not for bearings or moving parts.

[@richardbarton7]

would just use linseed oil on your worktop. Tastefully done bike for sure.

[@TUBICUS5]

Loving vids and garage mods😀more merch ordered too. As for worktop. Try linseed oil or danish oil. Brush on. Wait for r hours to dry and repeat. May even need 3rd coat. See how that goes.

[@danbass3731]

Looking sick Harry man and garage is sick

[@grayhey152]

Love the grey and orange! Looks awesome dude

[@gonzz01973]

Absolutely beautiful build Harry...! Can't wait to see you shred it...!!! Congrats on the success...Keep up the hard work....

[@danielstrangeway3840]

Looks great the bike look forward to see you do more rides soon

[@GalacticWoodsman]

You can anodize all of those titanium bolts pretty easily and put whatever colour you like on them 👍🏻 I do it with titanium frame pocket knives often

[@colten4355]

You are correct about the current with powder coating, they then bake it onto the frame after in an oven

[@russilnickyj3674]

That hub noise!! 😍

[@callumsmith4237]

Loving these videos watched you from the start smashing it lad x

[@Roostsandboost]

I love the thumbnails with when Harry is showing off his new bike like a proud parent

[@X5cape]

loving your content harry, literally can't get enough you have even inspired me to start my own youtube channel and re-build/re-spray my hardtail as a lockdown 2.0 project. sick build man those tan walls really pop!!!

[@kylelc17]

Damn. That's sick. In the process of building my dirt jumper up. Scored it for 60 bucks. Really good shape. A bit dirty but it's clean now. Love your bike 🤙🏼

[@Tech-lord123]

looking sick Harry

[@harrymain]

Thanks!!!!!!

[@adammorton6660]

That bike is fire 🔥 man!!! Those colors together are unbeatable!!!

[@clxwn5751]

I was. Looking forward for this I just made a full playlist in order for the garage build and made a playlist for mainland when that was happening keep up with the good work 👍

[@Will-iw8in]

That jump bike is looking so sick loving the vids

[@harrymain]

Thanks !!!!

[@scutchins7298]

Copper grease has bits of ground metal in it! You should not put it on bearings as it will be pretty much the same as sand over time, designed for metal on metal but not on moving parts 💪🏼

[@dancarly100]

Use yacht varnish on the worktop it's hard wearing and waterproof and that jump bike looks sick 🤘

[@Yhz111]

Keep up with the bangers best youtuber atm 👊🏽by far the best bike build you have done should put the orange chromag seat on 🤘🏽

[@zoegill6121]

Your videos are so sick and love the new jump bike colour

[@michaelclyde3982]

Unreal Harry great video and build

[@stussyboi01]

Can you do a full bike check - everything you used parts wise ? Sick build Inspiring

[@radojamie]

Awesome vid loving the new look of the bike... what rear hub is that it sounds amazing

[@cyfunk]

Just put my order in for the tan hoodie. Can’t wait for it to come absolutely love the colour combo.

[@ashleyprimett7220]

Did we just witness the most cleanest bike build from you mate, what a serious bike man you should make you're own owna official bike frames cause I would buy one for sure

[@timpannella9795]

You need to seal that counter top. Use something like Spar Urethane which is what people use to seal wooden boats so they are not affected by temperature change and humidity.

[@nicklee9612]

Wow what a build dude. 👏 👏 👏

[@macsays2834]

Love that the bike was done around the brake! totally smashed it 👍🏻

[@OllyBaldwin1978]

Thanks Harry. Thanks for ur hard work creating these vids we watch. Honestly.... I look forward to the next vid. Take care of ur self mate. 👍 Keep making these great episodes dude. 😊

[@so-b-itcustoms908]

For the moisture you can buy these little tubs that draw moisture from the air. Don't know what they are called but they work

[@johnbaines4908]

Get the computer monitor mounted on the wall, maximise the workspace...

[@C-24-Brandan]

Absolutely Lovin The MTB Garage. It came out super proper bro, congrats!! #OWNA #MTBGoals #MTBDreams

[@harrymain]

Uesssss!!! Thanks for the support !!!!

[@C-24-Brandan]

@@harrymain You're Welcome 👍🤟🚴🔥

[@dantanfield7664]

Have to say that's a pretty epic looking bike .simple but effective 👌

[@callumcooper7925]

Me - sees there’s a new Harry main vid Me- instantly clicks on it Me - instantly likes it cos I know it’s gonna be sick

[@harrymain]

Yes Callum!!!!

[@Charlie-th7jo]

Yes broski

[@callumcooper7925]

Yes lad !

[@Charlie-th7jo]

S1 buy me hope brakes

[@callumcooper7925]

No 😂

[@ReeceGriff]

Just ordered light blue hoodie!! Keep it up mate

[@nicolaslesire5921]

vertical stickers would be sick for on your forks and stuff!

[@harisdanciu]

Man, that look INSANE !!!! 🤯👍👍 It's really Perfect!

[@mikeyb3782]

Just seen you in southport and the golfs sounding sick!!!

[@avocado71]

Harry, you can't stop the moisture getting into wood, you just have to allow for it. Recommened Osmo PolyX OIl.

[@petemarshall7186]

Hey Harry your vid's have been ace to watch over lockdown, they have made me want to get back out on my bikes, I have also just got my self a dirt jump bike as a project to do up. Where did you get your's power coated?

[@bertielee3037]

Upload it on the GMBN uploader for the bike vault!🤟😝

[@jacklightburn7167]

Harry the vice could be making it dip more with the weight at the back if its not supported far back, just a thought it might not be

[@zombiecod1624]

I’d recommend a clear polyurethane to seal the work top and gives you a nice surface to work on.

[@jinjunior4674]

I already know it’s gunna be a banger just ordered the same tool chest

[@harrymain]

yes mate!!! thanks for the support!!!! :D

[@markbooth6745]

Looks a sick bike harry that. Great videos mate.😃👍

[@dazzasp3]

Amazing so wish we had this concept in the 80s the whole concept 70s raleigh bomber got me started then80s bmx keep it up h

[@mradam4430]

Dude, you need a split air conditioning system, nice and cool in the summer and heat in the winter. Set it up to come on automatically when it gets super cold.

[@timkendall-jones7998]

You need to seal the underside of the wooden worktop. That should stop the bowing. You can lower the doors by the hinges.

[@thomasyorkmtb7599]

Love it got the jacket and I love the bike

[@harrymain]

awesome!!!!! :D

[@christopheredwards6430]

Awesome build Harry, if your going to spray the e bike. Have a look at the 2021 kenevo comp which I have, you should love the colour 👌🔥🔥👌🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@itslukey6135]

Build looks fresh lad! A cheeky orange hope seat clamp could look 🔥 though 😉 Keep up the great content! Hoping to cop more owna merch soon too! Love the collection I have already 🤤

[@GAVINHURST]

That looks awesome and the days of where you’re beating your bb in on the floor 👍🏻👍🏻Must be so nice to have a proper workstation

[@zac.9994]

Love the build DJ bikes are oh if you have any old parts Harry I’ll happily take them for my gt la bomba pro love the vids

[@lewiskennedy322]

Yo man another great video just copped some more merchandise from owna recently got my first hoodie and Jersey and I'm back for more top quality stuff 👊🏻👌🏻

[@yarders9191]

Get yourself a dehumidifier in there mate. Insulating would help too

[@martynasgiedraitis8282]

i have done my chameleon build, after seeing yours, as well. single speed, just like yours. will email you my perfect version of it :)

[@markjameson3821]

Love the videos where do you get decals from I'm doing a custom build on jump bike

[@ShalomBrother]

U need to get a dehumidifier in there boss to keep the humidity down

[@tomcodkid1643]

thats fire man, loving the vids keep it up man stay solid stay safe stay awesome!!!!!

[@charliewallace1803]

Yo bro keep up the cool garage

[@harrymain]

sick thanks!!!

[@charliewallace1803]

You forgot to paint all of the walls bro

[@charliewallace1803]

Hahahaha

[@weareallbeingwatched4602]

Use tung oil to seal it. Or rustins two pack varnish if you want to plastic coat.

[@steezee4927]

Love the colour of the jump bike bro!

[@harrymain]

Yo!!!!

[@weareallbeingwatched4602]

With powder coating, the plastic dust gets an electrostatic charge as it exists the gun, the charge on the part attracts the dust, then the dust is baked in a kiln causing it to melt into a continuous plastic coating.

[@wick.g.8604]

Looks really nice from Harry :))

[@benwilko1149]

Use clear coat spray tin will secure and protects the wood from moisture

[@beckbrookes5903]

Huge fan!! Buzzing for my owna hoodie to arrive to add it to my collection of owna clothing✊🏽😍

[@harrymain]

SIK!!!! Thanks for the support!!!!!

[@beckbrookes5903]

@@harrymain just ordered again💯💯! I think I deserve a follow on Instagram: beck815 I’m only joking man🤣 My wardrobe is gonna be full lol with good clothing though👍👍

[@philipcorcoran7856]

Didn't know I needed a jump bike, till I saw this. To be fair I loved the old build too. Where can I get the spec of your build?

[@AZZ3R1]

Should only use copper slip on threads that dont require to be removed often, it stops seizing. Grease BB axel but would remove from top outer cup as they are sealed bearings.

[@craigjohnson7401]

Looking nice 👌 2 ideas for you, Owna mechanics matt for the floor and a Dimplex PFH30E 3kW wall heater 👌

[@custombike3136]

Look absolutely amazing!

[@patrickwhitney9887]

Great vid bud. On the counter top, wood like that needs to expand and contract with the seasons. Putting more screws in it will make it worse and it might crack. You're better off gluing it down with something flexible like silicone. Or just put a couple screws at the back wall and nothing at the front. Also some wipe on polyurethane will seal it up good. Keep it up, brother!

[@slik_rl116]

Get some orange grips to match the tyres forks and stickers id go for orange and grey sort of build

[@cameronmagrath2034]

harry you should change the grips to a similar colour to the hope brake

[@user-kj4lq9dm5m]

You Need Yachting vanish to seal the wood Harry or polyurethane varnish 4 coats or five really good but dry the wood out first

[@Futtefan]

Awesome sick bike

[@kaseumac3251]

Need more vids, I count down the days for the next vid 😂, new owna jersey come loving it in red, gisburn forest today was unreal in my new gear

[@leechaco3709]

Every build is so insane insane insane I love it the Transition is my favorite build💯

[@briztoleez9025]

Marine yatch deck varnish....or Danish oil...although the oil needs 're doing a lot.

[@fusiondiggersa8817]

Powder coating is we’re a positively charged obj sect is sprayed by a negatively charged iron rich sandy paint mixture

[@firetruck23cole61]

Looks absolutely sick man 👍

[@FitnessWithLucus]

Epic video like this for a better 2021!

[@mc_laren2354]

Very cool bro!😝🤘

[@johnsonjay60]

Oh u did add the bolts! But imagine gold or orange. And colored zips ;)