Custom Pink Lian Li 011 Dynamic EVO

In this video I quickly show you the custom pink 011D EVO case I modified and painted for my next build. That next video will be coming in the next 2 weeks or so (from the date i uploaded this).
The build in this case: • My First Custom Water ...
BuyMeACoffee: www.buymeacoff...
*Things I used for this case:
Case: amzn.to/3El6Lav
Paint: Ironlak 030 Delicius (Hobby Lobby)
Paint Scraper: amzn.to/3CATitZ
Blades: amzn.to/3e4k1FT
Tape: Painters Tape
Drill and drill bits
*As an Amazon Associate, I earn from qualifying purchases without any additional charge to you.
*Money I may make via Affiliate or other means I will reinvest into my KZbin channel. Thank you for the support.
*Some parts in My setup:
Govee Glide Wall Lights: amzn.to/3QpuIkm
Geeni Smart Surge Protector: amzn.to/3xwt4oy
Razer Keyboard: amzn.to/341XyEd
Keycaps: amzn.to/3hrqXuQ
Razer Mouse: amzn.to/3IzQ6zo
MSi Monitor: amzn.to/3HxcAiS
Logitech Headset: amzn.to/3htJQxc
Corsair Keyboard/Mouse Pad: amzn.to/3ti2TQn
*Camera Slider: amzn.to/3QyfSZc
*Lighting I Use: amzn.to/3MNHrdH
*Camera I use: amzn.to/3481zTP
*MIC I use: amzn.to/2W3O4nU
Software I use: Filmora X, Davinci Resolve, Audacity & Paint(.)net
Follow me on Instagram and twitter
/ buildswithv
/ buildswithv
For business inquires: [e-mail]
**Your results may vary. I am not responsible for any damage. Do this at your own risk.
#PinkPCCase #LianLi011DEVO #CustomPC

[@thatdiyguyraymondmonk1225]

I’m not so much into pink, but you have given me an idea…

[@omarcerda6439]

Sooo sick man! I love the look without the middle piece in the case

[@BuildsWithV]

Thank you!

[@FishyReview]

Love the use of the Dremel!

[@pauls.5815]

used a PETG frosted tube and filled with blue water. I sealed the ends and added fittings on each end I then went from the top to the bottom of the case. I used this as a replacement support. I cut the support and did the glass mod that you like to do. It makes the case less ridged when you remove the support. The tube I added in helped solve that and went well with the build. The pipe is not actually connected to the water loop but appears to be functional. It is not in the very corner like the original support, but helps the case feel more solid. Where I have it. I was going to put it in the very corner but it looked to obvious.

[@theretrocaveman]

literal master at work

[@BuildsWithV]

Thank you 🙏

[@philsogood2455]

Ditto that!

[@ivanwill]

Looking forward to this build. Also, will the screws for the back of the case, the slots (PCI, GPU, etcetera) be painted, too? PS: Maybe I missed it, but, how many coats did you put on?

[@BuildsWithV]

I’m super excited for it for sure. Definitely nervous but I’m going to just take it day by day step by step. The screws won’t be painted because they’re something that gets messed with more and I feel like the paint would fade quickly. I put 3 coats of paint on it on most parts and 2 coats on some.

[@schnitzelsamy]

😍

[@JT7POV]

Is there a video tutorial you made where there are no image cuts? Do you make glass like in this video? but a complete video without image cuts

[@MrMr-oj7hl]

it’s very pink

[@ayko5985]

Hello there, how did you manage to get to bare bone of the case ? I'm trying to remove the front panel (the small long one with the on/off button) but it seems really hard screwed

[@SirMika9]

I could be nice but the two glass clely don't join well and we can see a space betwen them

[@yung.god__]

how much would you charge to get this done on a 011 mini

[@GHOST-mk8su]

cool

[@wendellglenn9371]

How can i rip off easily the paint in the glass?

[@Prodby_XO]

Awsome vid love the case mod definitely gonna do it just one thing I noticed if your just cutting out the support beam do you need to drill out the rivets

[@BuildsWithV]

Yeah you still have to drill them out. There’s a bracket behind that doesn’t need to be there once you cut the beam off

[@Prodby_XO]

@@BuildsWithV 😲 yes that’s right I forgot about the brace well played sir 😂

[@kemo9507]

I am planning on doing this same exact mod for a white version but the repainting and cutting mod is what’s really stressful

[@pouetor]

me too ;)

[@BuildsWithV]

Yeah it's definitely stressful. If you do it, just take your time and plan everything. Don't stress too much and I'm sure it'll be okay.

[@kemo9507]

@@BuildsWithV just a quick question! Rather than removing the glue and paint from all sides could you just take out one side where the metal peace is removed? rather than repaint???? Have you tried that?

[@BuildsWithV]

@@kemo9507 yeah that’s how I do it. I only do everything when I need to color swap

[@BuildsWithV]

@@kemo9507 I cut the two small brackets off while it’s on the glass, gotta be extra careful so you don’t hit the glass. I cut half way and then heat and peel. Once it’s peeled I break it off by hand. Then when you’re scraping you carefully scrape and then try to make the line straight. The bottom bezel on the front is slightly larger than the bottom bezel on the side (idk why lian li did it this way) so it’s up to you if you want to scrape to make them equal size.

[@tarmo-tanelsusi3575]

Purple next 😂

[@anujgameryt13]

Im waiting 011 dynamic xl evo i hope its totally look like your cabinet 😅

[@BuildsWithV]

It looks amazing from the pictures I saw. Can’t wait to see it in person.

[@dinbertuso6211]

Where did you get the pink borders around the glass?

[@-Brunnen-G]

Cool, but the video needs a short tools and materials description.

[@BuildsWithV]

Thank you 🙏 I will keep that in mind for the next videos.

[@dysnXO]

can i order custom 011 evo fishtank mod and shipped to sweden?

[@xo2x]

do it again but with all white parts.... lawl

[@JT7POV]

What is the name of the tool where you remove the glue from the glass?

[@edwardrivera1107]

Heat gun

[@edwardrivera1107]

Painters scrapper

[@irvinchavarria995]

Do you have the link for the tape you used to remount the brackets to the glass?

[@BuildsWithV]

Yeah I forgot to list it I guess. It’s gorilla heavy duty mounting tape: amzn.to/3S1Clgv

[@LawsOnJoystick]

doesnt it come pink standard?

[@willwilliams198]

Does the black case have tinted glass that scratches off? Was curious why you usually mod the white case. The black case you did, i noticed you outsourced the glass.

[@BuildsWithV]

Yeah the black case on the old 011d had tinted glass but the paint and tint are permanent. They don’t come off. The white case (on the new 011d evo) has removable paint and it’s not tinted. It’s also low iron glass which is really nice.

[@willwilliams198]

@@BuildsWithV do you know if the new black evo has the same glass as the white case? I have the evo in black and was thinking of trying this mod out.

[@willwilliams198]

@@BuildsWithV also thanks for the quick reply. Keep up the good work

[@BuildsWithV]

@@willwilliams198 I haven’t tried it but according to other who have tried they told me it doesn’t come off unfortunately. Only way is to use custom glass

[@willwilliams198]

@@BuildsWithV ah okay, i appreciate it 👍🏽👍🏽

[@milano8929]

Nice, but all that work though, just for a bit better look ? Original look good as it is. But ofc its your choice

[@destiniycovington6058]

How much would you charge for that exact case I want it pink as well but maybe a little lighter something to match razers quartz color and the bar in front removed I was also hoping to get a grey (mercury) color instead of the pink on the glass parts how soon will I be able to place a order with you

[@BuildsWithV]

If I could find the exact colors to use for the project it’d be about $300-$350 shipped

[@destiniycovington6058]

Okay yeah and how long will it take to ship out and when can I place my order do you have a email or how would I be able to contact you is it only through comments.

[@JT7POV]

brand of glass scraper?

[@BuildsWithV]

It’s a hyper tough from Walmart

[@JT7POV]

@@BuildsWithV instead I noticed that you don't see in the video the moment when you paint the glass pink, as you did in that case? particular spray? how much did you paint in cm width of the glass?

[@BuildsWithV]

@@JT7POV I used the same paint as I did for the case so that it will match. I think it’s just over 2cm for the bezel but I’d recommend a bit bigger. I may have to redo mine bigger because some of the brackets are showing

[@lovesandwich8783]

@@BuildsWithVI know its a bit late but did you paint the glass from the outside or inside?

[@BuildsWithV]

@@lovesandwich8783 inside

[@MAIKUS07]

awesome mod!! what did you use to clean up the glass?

[@BuildsWithV]

Razor blades and foaming glass cleaner

[@BuildsWithV]

Thank you 🙏

[@anujgameryt13]

bro make video 011 dynamic evo vs evo xl

[@BuildsWithV]

Will try if I can get my hands on one of them. Thanks for the suggestion.

[@JaYgRiFfSTuBe]

Awesome do you do this for a service?

[@BuildsWithV]

I can offer it, trying to get into it and might start selling stuff like this on Etsy or eBay. Haven’t worked out all the details yet. Want to make it affordable as well. My biggest issue is that it’s quite expensive typically for shipping. Plus case and I have to make some money too so it comes out to like $300 for the custom case

[@JaYgRiFfSTuBe]

@@BuildsWithV can you give me your email tho contact you ?

[@JaYgRiFfSTuBe]

All I want is the fish tank look fram remove with no paint job

[@BuildsWithV]

@@JaYgRiFfSTuBe yeah it’d be right around $300 shipped

[@JaYgRiFfSTuBe]

@@BuildsWithV let’s do it

[@pouetor]

is there a way to scrap only the paint on the glass corner ?

[@BuildsWithV]

Yeah, you just have to be extra careful

[@pouetor]

@@BuildsWithV more than your way of doing it ?

[@BuildsWithV]

@@pouetor with a color swap you just scrape everything so no need to really be worried about accidentally scraping too much. When you scrape just the corner you will want to be careful around the other bezels so you don’t accidentally scrape that off. I do it that way anytime I mod this case without color swap. Also when you cut the brackets on the front glass you have to be careful not to hit the glass with the cutting tool.

[@pouetor]

@@BuildsWithV yeah, I got it. Do you have any idea on how to scrap the paint in a straight line ? I'm thinking about using a metal piece as à guide ?

[@BuildsWithV]

@@pouetor I usually just free hand it and it works out great for the most part. I’ve also used tape as a guide but that didn’t seem to do much. I’ve used a ruler as well which seemed to work best but sometimes it moves which is annoying

[@duffel87]

bro it looks great, but such a hustle- headache to execute

[@BuildsWithV]

Thank you 🙏 I’m used to it at this point. I’ve done this several times (besides the painting glass etc.) but yeah it’s a pain sometimes. Especially when it doesn’t go right first time

[@lupus6320]

i dont know why but mine class paint is so fucking stuck i cant get it out

[@BuildsWithV]

Is it the black case or white?

[@BuildsWithV]

Black case has permanent paint and cannot be removed

[@JaYgRiFfSTuBe]

Oo and I’m first lol

[@BuildsWithV]

😅 Thank you 😊