CUSTOM Slide-Out Pantry for my Aluminium Canopy

Slide-Out Induction Cooker Video • CUSTOM Slide-out Induc...

[@chrisfisher3900]

Nice work

[@house-ofhoon]

Cheers Chris!

[@Holodomor4.0]

Far out man you made that look easy! I wish I had the experience you’ve got in sheet metal! You’re very good at it!

[@house-ofhoon]

Cheers mate! The magic of editing 😂 It's all just practise mate 👍

[@TRIGGERHAPPY489]

Hey mate just found your channel. Appreciate all the effort you go into showing all the steps! Top quality work! Keep it up

[@house-ofhoon]

Much appreciated mate! I try to show as much detail as I can without it becoming too dragged out and boring.

[@andrewcheshire244]

Nice work! ugh I'm dreaming of a sheet metal bender/press like that.

[@house-ofhoon]

Cheers mate! Definitely makes life a bit easier 😁

[@ade725]

Love the whole build mate, nice fab skills.

[@house-ofhoon]

Much appreciated mate!! Glad to hear your liking it 😁

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@grant209]

Would love to have a workshop like that

[@house-ofhoon]

It certainly makes fabricating things easier 😁

[@robertwilson1827]

My good... now that's a man cave with some toys!!!💰

[@house-ofhoon]

Haha cheers mate

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@matthalpin1981]

Great setup. So many good ideas in this build. Thanks for sharing.

[@house-ofhoon]

Cheers mate. Thanks for watching!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@matthalpin1981]

@@ottouring Subscribed now! :-)

[@ottouring]

Hi Matt, Thanks for subscribing. I really appreciate it. Hopefully you get some ideas or discover some great locations Cheers Craig Out There Touring

[@house-ofhoon]

Hi Craig. Please don't go and advertise your channel on my videos without even contacting me about it

[@evil17]

Yeah good job mate, I like it & ur new HOH badge. Have u had any issues with the paper towel unrolling as u travel from vibrations etc? If it was unrolling at all I was thinking maybe u could add a little bit of thin-ish spring steel to apply a bit more down pressure from above or behind in centre of roll. Nice setup. Cheers

[@house-ofhoon]

Cheers mate. Yes, my paper towel unrolls unfortunately. I'm sure if I make it a tighter fit into the towel roll it'll be much better. That's a great idea though! Thanks 🤙

[@petergreber7051]

Fantastic job!

[@house-ofhoon]

Cheers Peter!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@DavesIneosGrenadier]

So easy to do when you have all the tools. ……………………………..the skills also help a lot

[@house-ofhoon]

More can be created with more skills and less tools than more tools and less skills. It's all about the operator 👍

[@cyclemoto8744]

If only i could TIG weld. Cheers

[@house-ofhoon]

Anyone can TIG weld. Its just practise 😊

[@brianclark9439]

Nice work mate Looks like you have access to a workshop with some good gear and skills and ideas Regards another fabricator who loves doing the same 👍

[@house-ofhoon]

Cheers mate 🤙 Gotta love creating something from nothing 😁

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@lsswapped80]

Nicely done 👍🏾

[@house-ofhoon]

Cheers mate!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@elizabethbell9716]

Great work!

[@house-ofhoon]

Thanks Elizabeth!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@HaidenMcGrath]

G'day, awesome build. Have subscribed! What screws do you use to mount the pantry to the aluminum canopy floor? Are they self tappers?

[@house-ofhoon]

Thanks for subscribing mate! I used stainless dome head bolts and put 50x50x3 aluminium square plates on the underside of the floor with a washer and nyloc nut 👍

[@stevefraser6628]

great job mate

[@house-ofhoon]

Much appreciated Steve!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

[@Bns790]

Hey mate awesome video, good tip is to just use 25x25 angle for your locking lever bars, fair bit cheaper if you make a few and easy as

[@house-ofhoon]

Cheers mate! Always more ways than one to skin a cat 🙂

[@MRMOPARMAN0426]

Problem with 25x25 is you have to order and stock more material, and you only have 22ish mm to drill and bolt, which can be a dog to drill in tight spots. By using sheet, you can fold it different ways to add more strength (ie S or C channel), you can make the bolted section as wide as you need, the material is already in stock and you can usually make it from scrap you would normally throw out.

[@Bns790]

@@MRMOPARMAN0426 I just use the angle because I make heaps of them so I have plenty in stock, then I just rivet them, but sheet is also a good way

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@mickeyblackice3694]

Awesome I like that

[@house-ofhoon]

Cheers mate!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

[@pilchard2000]

Looks great. Absolute duck,s guts.😂

[@house-ofhoon]

Haha cheers mate! 😁

[@RGVJ21]

Nice work, subbed.

[@house-ofhoon]

Thanks mate! Appreciate it!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@IJ-E36]

Very cool!

[@house-ofhoon]

Cheers bro!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@johncrotty8086]

Kickass! 💯

[@house-ofhoon]

Cheers bro!

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

[@outdoormountainman]

Awesome work and build. Did you make the canopy as well?

[@house-ofhoon]

Cheers mate! Yes, I sure did 🤙

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@stevekeenes4030]

Thats wicked mate, you make em for other people or just your own ?

[@house-ofhoon]

Cheers mate! Just make things like this for myself 🙂

[@jamesgill4035]

Needs Coco Pops!

[@house-ofhoon]

I have room for ALL the Coco pops!

[@timothyshields795]

Great video mate. If you were just starting out and didn’t have a folding machine like that why could you use instead?

[@house-ofhoon]

Cheers mate. You can actually DIY a folder out of some basic materials such as angle iron and some pipes. There are a few videos on KZbin of how to make them 👍

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@Mark-kb9yb]

Where did you source the netting. Awesome work!

[@house-ofhoon]

Cheers mate! I got it from spotlight

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@matthalpin1981]

How has the mesh netting held up over the past few months?

[@house-ofhoon]

It's held up well! Would be nice if the mesh was a little bit stiffer, however I really can't complain

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@Tubaroo1975]

How much for a custom pantry? Start a small business. All other pantry’s come standard dimensions.

[@baileyj6966]

hey mate where did you get that handle on the slides?

[@house-ofhoon]

Hey mate. I got it from Dunn and Watson 👍

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

[@timothycripps2721]

You put your logo on upside down ;)

[@house-ofhoon]

DOH!!! 😂

[@camd7452]

Would you make and sell the paper towel holders ? Keen to buy

[@house-ofhoon]

Yea mate. Send me a message on my insta to discuss further 🙂 instagram.com/invites/contact/?i=1ab1wuhuaz25&

[@ottouring]

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring