Custom Wall Mounted PC Case | Clean Setup 2019

[@jorcasce]

Some of the cleanest, best looking mods, which can be easily be upgraded into a desk, Kudos to you. Cheers from Costa Rica

[@jayg9430]

Clean and simplest set up. I have seen on KZbin. Great Job!

[@MsAfflictionOnYT]

This is actually very nice! You should submit your setup to a setup show like Techsource

[@albertlwj]

love simple and elegant builds

[@younisIT]

nice and clean setup .. just some cable change color to black and hdd change color blue to black

[@god.mp4]

Looks amazing! im currently in the midst of making my own, i recommend you use display port output on the gpu to the monitor for faster refresh rates and a better gaming experience!

[@jme.147]

I use hdmi for my 1080p 60hz and display port for 1440p 144hz, I needed layout designs for my wall mounted mc, I might get a different piece of wood and then had the idea of using longer screws for the mobo

[@juliancaste3914]

is the best look wall mount pc that I saw

[@prophetof56]

nice job, well done 👍

[@kyliandabancourt6112]

Idk if I’m just dumb but couldn’t you have put the graphics card directly into the PCIE slot on the motherboard instead of using the cable thing you used ?

Of course I could have, but then again, you can put all the components in a simple pc case under the desk, putting the gpu this way is kind of the point of the build haha

[@chrisanthony144]

Good job buddy!

[@beastarmy2023]

Awesome work 👍🏻

[@heinzawtun]

Very clean and nice setup. What's your temperature for your CPU and GPU like?

[@OmegatechInformatica]

Hey bro! A tip to your GPU Change de slot PCI-E The second is 8x De first is 16x

1. The extender cable can't reach the upper one 2. It doesn't need to because there is no real performance difference (16x is more bandwith but not noticable in practical use)

[@d3v-x64]

Nice Setup! What desk do you have? How long is it?

[@L1K3AF1re]

A few questions : How or with what u glue the aluminum brackets to the plywood? and the mount wall piece to the plywood ? thx

epoxy for the aluminum, I scratched the metal before glueing it using dremel, small screws and same epoxy i think for the wall mount

[@WuZzY]

how is the PSU stuck in place ? i cant see any brackets , and how did u stick the plexiglass on the wooded pillars?

there are brackets for psu, on the one side with regular mounting holes and screws, and on the other the bracket goes around the cables, so it slots in from above. Plexiglas is held in with screws, nuts are glued with epoxy in each pillar.

[@Hongriki]

nice! you wouldnt happen to have measurements of all that wood and aluminum would you?

The wooden board is 60 by 50 cm and 8 mm thick if I remember correctly. The aluminum L bracket is 1 by 5 cm, going around the board which means 2.2 m (+ few cm for edges) of L brackets. As for the holes and wooden/aluminum brackets for components, they have to be custom made for specific parts...

[@Hongriki]

Petar thank you!

[@Markjonathan]

Really clean! Does it kick out a lot of heat while you're playing?

Nothing special, I would say its even less noticeable since its up on the wall compared to having a mid tower on the floor.

[@richardkirbyapaga4462]

Love it. How much does it cost? Up

I don't know off the top of my head, but the materials used such as aluminum, plywoord and plexiglass are pretty inexpensive and easy to find.

[@richardkirbyapaga4462]

Petar i was going to copy your config ang set up so i might ask. But thanks fpr the content

[@KarrerFaith]

What bracket did you use for the GPU?

Karrer Faith Made my own, measured the old “normal” case and mostly traced from gpu.

[@KarrerFaith]

@ oh I see!!! Thank You for answering!

[@izzetert1794]

why didnt u show how you did the power button for the pc?

I forgot to show lots of details, but power button is very simple, just took the one from the old case and reshaped the plasti that goes on the actual button

[@rajwavdankar3145]

It's Beautiful!! ❣️✨✨

[@arlokkkk]

there are any wall mount case for sale that you recommend?

I saw thermaltake makes loads of them in the similar style, can't recommend anything since I didn't try any but P3 and P5 look sweet so I would suggest looking into those.

[@arlokkkk]

@ Thank you!

[@leonardfluhart3532]

Thats Awesome

[@blenderfan6115]

Good work 👍

[@exioc8992]

How did you attach the graphics card ?

I’ve made custom brackets for each end, on the classic end I’ve measured the holes from the regular case, everything else is custom measured for this specific scenario but is should fit the other gpus that are same lenght.

[@erhas9151]

Perfect

[@malybartus1]

nice

[@AmjadKalantan]

Great build. Do you have a link for the motherboard standoffs that were used?

Thank you. Here you go, i managed to find it: www.ebay.com/itm/Brass-Spacer-Female-Female-Screw-PC-Motherboard-Standoff-Riser-M3-x-4mm-60mm-Hex/302778630820?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 They are female-female so they can be secured from the back of the board.

[@ProudToBeCroat]

svaka cast sused!

[@b-side3682]

Well done!

[@JoseRodriguezFrio]

Can the power button literally be anything?????

Pretty much any simple button if you add the connector for the mbo pins, this one is just from previous midtower case the pc was in, i took out the power button and just made a new frame for it.

[@3rdJose]

@ think I'm going to do like a fighter jet type of button. thanks

[@phantombrothersaldridge]

New sub