What Fits My 3rd Gen Ram

Trying to find the perfect setup for your 3rd Gen Ram? Check out what fits on a leveling kit, small lift, and a large lift kit for your truck!
ADD your truck to the gallery
www.customoffsets.com/add
Want to lift YOUR truck?
www.customoffsets.com/lifts
Looking for wheels and tires?
www.customwheeloffset.com/whe...
VIEW more setups in our gallery at:
www.customoffsets.com/gallery

[@ryanreeder5897]

Thanks. I was looking specific and found it. I appreciate the comparisons the most. Saves a lot of money to see what it looks like before I invest. Again... thanks.

[@jachkbro]

2006-2008 was coilovers and you can fit 35's with a leveling kit with a some rubbing... 33's should clear just fine with a leveling kit

[@mikestrugar12345]

3rd gen 2500-3500

[@TristynRusselo]

I fit 35"x10.5" tires on my 2008 1500 4x4 with only a leveling kit (3" front / 2" rear), the new rims had 2" outward offset compared to stock rims, no plastic trimming I now have a 6" lift and can easily fit 37s when my 35s wear out. I will be adding a 3 inch body lift this spring.

[@SlickStickyy]

Me too on my 2012 but idk about 37s my 35s rub when I’m turning all the way in reverse

[@andrewnemecek4898]

U guys forget the 3rd gen 3/4 tons aren’t torsion bar suspensions and fitment is different and u guys show megacab 1500 which isn’t torsion key front end 😂

[@r3drum_ram837]

Great video...happy new years! Be well & stay vivid...

[@feraledge7836]

Should do a vid on 3rd gen 2500’s

[@rickyreyes48]

Yes

[@keltonderkach9601]

If only rust wasn’t a thing on 3rd gens 😥

[@feraledge7836]

Kelton Derkach I’ve had mine since new ‘"04" and I have 0 rust.. I’m in Florida 🙌

[@keltonderkach9601]

Feral Edge Lawn Service lmao your from Florida I’m so jealous though if your truck was driven in Canada’s winters it wouldn’t look like that lol

[@11ORTIZ11]

I want to order 20x10 -24offset on 35x12.5R20 on a 2004 Ram 2500 with leveling kit and ranch hand replacement bumpers. I have 33 but want 35 but not sure if they'll rub too much. Any suggestions?

[@nitesoftheday]

Also should do 3/4 07-14 Silverado/Sierra since you can fit different set ups on 3/4 tons

[@LandonWilks]

Yooo that’s awesome!! Y’all featured my truck(the blue sxt with Fuel Mavericks)

[@trasonwilks9032]

Sick

[@tylervertz8286]

Nice truck

[@josephmalinowski6817]

I have a couple of Dodge Ram pickups and my 2004 Dodge Ram Sport I have the leveling kit but the lower plastic piece on the front bumper I hit some deep snow Ice combo and cracked it right there so I had no choice but to cut the lower part of the bumper off that part breaks easily

[@JuanRodriguez-vi5bh]

Thanks for the video 👍

[@AJ-yq5xk]

I've got a 05, with a readylift leveling kit. I'm running Bridgestone M/T 35×12.5R20. I only have minor rub in reverse at max turn and it's on the sway bar.

[@ryanschwark2791]

Which lift

[@crazyman3346]

thank god i have been waiting for this

[@RamandChevyOwner]

Thanks guys this helped a lot,now I know what fits my 2006

[@mikemcreynolds6236]

4” lift and 35’s and your won’t rub

[@amolinari9]

I’m one of those 59 guys that did a 4” lift lol. It looks good and is all I could afford. I get asked all the time if it’s a 4x4 or 2500 even though I’m a 2WD and clearly have ram 1500 on my doors lol.

[@Elco_Aaron]

What size tires are you running?

[@leoo9692]

Its funny I did this about 2 months ago. I did this to my 06 dodge ram. I put a 2.5 lift with 20x10s with 0 offset. Wanted it to be flush but I got about an inch or two sticking out. I'm good with that though.

[@LUSK-OUTDOORS]

2003 1500 with a 3 inch front keys and 3 inch rear blocks. On 35 inch firestone XTs no major rubbing

[@jdkirane7990]

16 wides with spacers is crazy!

[@briantezoquipa]

I’m just happy to see a ram

[@Lonewolf23-26]

I put 35x11.5 an had to trim more than the plastics for full turn no rub. Still looks good tho

[@Doobson]

love the vids, 1 thing though, you guys showed 2 Megacabs, even if they are listed as 1500's the megas use 2500 suspension and axles.

[@thewildrudster8470]

You guys should make a video of what fits on a 04-08 F-150

[@tritenboi1080]

Have a 2012 ram 1500 and looking for new rims. Want to have it with a 2 in level in front, would I be able to run a 20x12 rim with more low pro style street tires instead of all terrain or mud tires on them without rubbing

[@theurbanartist775]

I have a 05 Ram 1500 with 2.5 leveling kit and 2500 shocks. I’m pulling the trigger on 20x12. My tires are Atturo xt 275/65/20. I’m hoping they don’t rub. I need stance and x10 just doesn’t stick out enough. Well a 2.5 level cover a 12 wide?

[@megancoffman707]

My husband is running 20x16 fuel maverick's on his 2004

[@svt_alan9762]

Thank youuu !!! I have a 08 1500 and I’m going to do the 4.5 inch maxtrac on my 20x10 anthem on 275 trail grapplers that equal out to about 34.2

[@mikerenfrew1]

Just recently did the same Maxtrac 4 inch lift on my 2006 Ram 1500 Rwd, Fox shocks, 17x9 -12 offset Raceline wheels, with 35”x12.5. Just gotta do minor trimming on the front chin spoiler and it will clear.

[@alemunoz298]

How about dually wheels can’t seem to find any 22 fuels or forces??

[@geravida171]

Can i put some wrangler Lt 275/70r18 tires an rims on my 03 dodge ram 2 door 5.7hemi truck with no lift kit

[@noidontthinksolol]

slightly lowered early 3th gen (02-05) rams with wide wheels are perfect

[@DakotaE57]

I got a 06 1500 that im running 35x12.50s on stock wheels at stock height with no rubbing.

[@dillonproctor4614]

I've got a 5inch lift I'm thinking of doing 24x12 rims with 37 1350 24 tires will it fit you think?

[@HalfClickUp]

Random question, but what camera did you guys use for this video?

[@angelsuarez3448]

i have a Leveling kit on 35x12.50 and 24s no rubbing at all

[@bjtherapper7576]

Don’t listen you can do 35’s on stock ride height with minimal rubbing in the front not bad at all

[@kyleriess7368]

I’m running at “6” lift on my 2008 ram 1500 with 305/55 r20 33s

[@Toasamoa1010]

Next do an episode on 4th gen...lifts,levels and wheels etc..

[@jperezjesseperez17]

Let’s see more 4th gen ram trucks 🤘

[@lukehudgins7347]

Do a what fits my obs f150 video it would really help

[@chardwick8561]

I fit 35 x12.5 wheels on my stock 08 ram no rubs or anything full turning radius

[@FuseBeat]

How

[@2mbutler]

I did the same on my 2004 Dodge Ram 20x12 Moto Metal rims 35x12.5 tires on a 7 inch lift. No rub or trimming.

[@donovansmith3232]

I put 35 12.50 on my 06 and I think I had a 60-70 percent turning radius

[@austinnewlon8184]

Mine is an 07 mega cab I have 12 wide 33 and they rub my inner fender

[@romeiosif7822]

@@donovansmith3232 was it 2500? Cuz I have the same one 35x12.5 20r by 20x9

[@superNctc]

What fits 4th Gen Cummins please

[@thatfakelaramieslt7127]

Need to a video on the 2nd gens from 1994-2002

[@cotims5110]

Do a vid on third gen 2500 dodge

[@willdibble2081]

Oh shit live talks channel finally sum for my 3rd gen

[@thomashoward9806]

Question. How come the builders can't come up with a solution to the rusting over the rear fender wells? I guess the sooner they rust the sooner you'll buy a new one.

[@roymorris698]

Aluminum bed will fix that or fiberglass

[@nitesoftheday]

Do 3/4 3rd gen Rams since suspension wise very different

[@donaldwarner5402]

I have a 2004 2wd ram I just got, it's still stock and I just put 295/70r17s (33x11.5) on it and theres no issues with scrubbing what's so ever but I plan on getting 305/70r17s (35x12) soon and was wondering how would they fit an whats the best way to lift a 2wd

[@CustomOffsetsTV]

See what others went with in our gallery! www.customwheeloffset.com/wheel-offset-gallery?wheel_width_from=12.0&tire_height_from=35q&sort=date&year=2004&make=Dodge&model=Ram%201500&drive=RWD

[@tylerdejoseph7263]

Can you do a video on 3rd gen 2500’s

[@Sodiumreactor]

Whats the setup for the red truck in the thumbnail?

[@belovedmountain]

Have an 05 2wd, srw,3500... stock height 295/70r18= +- 34.25h x 11.61w only rub front torsion bar if turn to tight

[@belovedmountain]

Cooper DISCOVERER AT3 XLT In that 295/70r18

[@colbymckay7765]

If the 33×12.5 tires fit on a levelled ram with minor rubbing, would a 33×10 or 10.5 fit with no rubbing?

[@theethanater6431]

That’s what I am wanting to put on mine

[@kingjames3197]

Hi! Gotta 2002 Dodge 1500 4x4. No lift. No leveling kit. Can I still run 10 wide with 33x12.5? My concern is the offset. Should I look for a certain offset to the rim? Right now I have 315x70x17 on stock rims and the tire will rub on the spindle/control when run without spacers. I want some kind of dish look to my wheels without rubbing when I turn or having to do a lift. What do you think>

[@CustomOffsetsTV]

Check our gallery out here for fitment help on a stock height dodge ram 1500 - www.customwheeloffset.com/wheel-offset-gallery?make=Dodge&model=Ram%201500&suspension=Stock&sort=date

[@bayouboattrash]

All of the 06-08 1500 4×4s were coil overs. 03-05 were torsion bars.

[@timmernator1]

02-05...I have an 02 running stock 20's with cooper 35's...stock as a clock

[@nickoliver3298]

My 08 fits 22x12 -44 and 33x12.5 tires no lift and I don’t rub at all. Even at full turns in bumps

[@franksnature8236]

Do you think your rim and tire setup will work on an 05 with no lift

[@daimencobb321]

Got a 2004 Ram 1500 4wd picked up a 2 inch torsion key level from Rough Country and they’re saying recommended 285’s max. I think I can go bigger with a little trimming. What do you think on a 2 inch level?

[@CustomOffsetsTV]

Yeah with trimming you could probably fit more!

[@jamieround2072]

Also Wondering...... IF,,,. THE MEGA-CAB'S CAME OUT IN THE 3 RD & 4 TH & 5 TH Gen,. Mega Cab's were they all only 2500's or did any come out w/ the 1500's.......?????? or does any one know any body buliding any 2500 mega cab's frame & all & changing the axxel's back to the 1500's so 1 it's not so dang heavy weight wise...& so it's a lot better on gas as well in the city & hi-way's.....???????????????????????????????

[@jamesgrant1713]

You can get 38s on a 6 inch cali suspension lift, "6" unchained "

[@vintagefire7796]

im rocking 315/70R17 (34.5'x12.5') on 17x8 on my dodge 1500, i put a 3'' lift on the front and left the rear stock. rides smooth but im about to put better shocks an maybe more aggressive all terrains.

[@rysherman2952]

How much trimming did you have to do?

[@vintagefire7796]

@@rysherman2952 tbh, nothing man. it all just fit, it rubs a tiny but only when you turn sharp. sorry it took so long to reply

[@jamieround2072]

i'm a sub here but really wondering when u r going to have a video series on what all fit's the ( IN-SIDE CAB PART ).... 3rd gen ram 1500 4x4 crew cab big horn edition short bed ( what all can be swapped into my SOON TO BE 2006 RAM 1500 4X4 CREW CAB SHORT BED ........??????? i think the rear door's r the 3/4 or some thing like that....they r not the full size 's i do know that by looking @ them !!!!! I WANT TO KNOW BY THE SEAT'S ( FRONT & REAR ) & HOLE CENTER CONSOLE'S ( FRONT & REAR ) & MIDDLE FRONT HOLE DASH WHERE I CAN GET AN UP-GRADED TOUCH SCREEN RADIO W/ BLU-TOOTH & NAVIGATION & STILL PLAY REG,. ' OL C.D.'S STILL OR WHAT EVER I WANT / NEED TO DO..... ( ALSO OF THE FRONT & REAR FENDER'S / BED SIDES & THE WIRING HARNESS Weather or not the factory harness has to be all or partially re- did from some one who does all the wiring all inside the crew cab front & back the newer styled & newer gen,. of headlight's too plzzz & thank u ..............................VERY DETAILED LIST OF THE INSIDE THE CAB'S PLZZ & THANK U !!!!!!!!!!!!!!!!!!!!!!

[@cutlerfloyd4624]

Im wanting to run 24x14’s on a 6 inch when i go to the gallery i pus in the year which i have a 07 ram 1500 rwd i see maybe 2 or 3 trucks thats around my year and the rest are 2010’s and up

[@speedingwithbino2922]

bro im running 24x14s on a 5inch roughcountry follow me on IG for the whole journey @Bino__Gotti

[@richghostman4763]

Disappointed you didn't talk about the 4-5" lifts for 3rd gens. or the 2500's. I've been trying to verify if I can manage 37x12.5" on a 5" lift without problem, on 08 Ram 2500. I want to keep the minimum lift I can to fit 37's. (on 18x9, 20x10). Is anyone running this setup?

[@CustomOffsetsTV]

Rich, check our gallery out for fitment help! customoffsets.com/gallery

[@justinvanmetre4358]

What about a 2nd gen Dodge Ram 2500?

[@ruffoff-road7919]

I have an 03 ram with a 6 inch lift on 37/13.5 and have very little rub

[@CustomOffsetsTV]

We would love to see it! Make sure you add it to our gallery if you havent already! customoffsets.com/add

[@trickster818]

What are the specs on the ram in the thumbnail ?

[@jabigonzales4303]

I’m on a leveling kit and running 35’s

[@zacknelson8918]

I have an 05 ram 1500 and its leveled and I am rocking 9 wide 35/12.50 and no rubbing on 17"

[@jasonmorway8263]

What rims? Any offset?

[@zacknelson8918]

@@jasonmorway8263 moto metal , no offset

[@jasonmorway8263]

@@zacknelson8918 Thank you!

[@Swangin26]

Should do 2011-2016 f250

[@bigboy3150]

I’m getting an 04 Ram Hemi. What’s a good size for an all terrain or hybrid tire and what brand would y’all recommend

[@CustomOffsetsTV]

Check out the Nitto Ridge Grapplers they are a very good all around tire for most applications! www.customwheeloffset.com/store/tires?brand=Nitto

[@yaboichriss9148]

What fits 2015+ GMC Canyon

[@MyBinky]

Does anyone if I can fit a 16x8.0 rim on my 3rd gen?? Tires specs I’m sure will be okay as they are 34x12.50. But I’m nervous is a 16inch rim will mount up.

[@CustomOffsetsTV]

Hey man! Take a look here to see what fits, you can alter the specs to make it fit your truck exactly bit.ly/3rVhSgE If you have anymore questions email us at [e-mail] and our experts can help you out! 🤙

[@andrewglennemeier959]

Do 2nd gen 1/2 tons

[@handro_5308]

What fits on 2nd gen Tacoma’s !

[@mikemcreynolds6236]

I run a 4” lift and run my 35’s and have never rubbed

[@danielvannuland2681]

Idk why youd use a 33x12.5, im a 2wd and i fit 34"s no problem lol

[@jadensamuelson]

Do y’all think I could fit 20x12 -44mm with 33x12.5R20LT on my ‘06 Ram 2500 with a 3inch leveling kit?

[@CustomOffsetsTV]

Check out leveled ram 2500's here and what others got to fit their trucks! www.customwheeloffset.com/wheel-offset-gallery?make=Dodge&model=Ram%202500&suspension=Leveling%20Kit&sort=date

[@blovell12v]

My 3rd gen Dodge Ram is running 22x12 with Nitto 420s on stock height no trimming or rubbing

[@millerbartlett3453]

Bailey Lovell 4wd?

[@blovell12v]

Miller Bartlett yes. But is also a 1500 so it sits lower than a 2500

[@millerbartlett3453]

Bailey Lovell mines a 1500 and a 2wd so it sits low and nosedives

[@oneclapped5.9]

2nd gen 2500 would be nice

[@spudlandhobo]

Why was there a 4th Gen in this video?

[@juanherrera2859]

I don't want to lift. I just want to tighten up the suspension on my '08 to negate the lean during turns.

[@alphadogx83]

Idk if that black dodge was a daliy driver but it was sweet af !!!

[@scottriggs1075]

It is cause I drive it every day

[@alphadogx83]

@@scottriggs1075 it's a sick ass truck man !

[@corbinclark4120]

Do a 2nd gen ram

[@W3pwnSH1T]

Im running 18x10 and 37s

[@yourneck2]

A question I never can get an answer to is “leveling kits do you need to get shock extenders or change your brake lines”

[@CustomOffsetsTV]

you don't NEED to, but anything over 2" I'd recommend getting new shocks, it definitely helps the ride.

[@Fontainegritandgrind]

2007 Dodge 3500 with a 8 inch BDS Lift what’s my max rim / tire size!!!!!!!!?!????

[@CustomOffsetsTV]

Check out the gallery to see what others were able to fit! Customoffsets.com/gallery

[@yungg9504]

2003 Dodge Ram 1500 5.7 hemi magnum

[@Jackson-ml1nj]

Uhm my 06 quad cab does not have torsion keys lol

[@ronialberti7257]

I have an 05 ram 1500 regular cab 2wheel drive I want to run 20 inch or 24 inch rims do I need to lift or legalize

[@ronialberti7257]

Or levelize

[@CustomOffsetsTV]

Depends on wheel width/what size tire you run! Check out what others are doin to get them to fit! www.customwheeloffset.com/wheel-offset-gallery?make=Dodge&model=Ram+1500&site=co&sort=date&wheel_diameter_from=20*24

[@hunterdery1984]

I got a 93 Toyota pickup can I do 33s on 20x12s on a level kit some one please help me

[@CustomOffsetsTV]

Check our gallery out for fitment help Hunter! customoffsets.com/gallery

[@RoyalKushSmoke]

They do not run tortion bars on 06+ ram JS

[@chrisnickells4481]

Do you Ever Reply to comments?

[@leftyleft8424]

Was hoping on seeing 4" on 37's 😔

[@javierceballos928]

Yall think about it

[@ethanmoss1911]

In 06 they left the torsion bars

[@savage_24v]

Where is the 2nd gen cummins?

[@amarucook7755]

The first 6 in lift the show is a 4th gen ram tho

[@javierceballos928]

Yall should give a free set of wheels

[@javierceballos928]

Was good

[@jeremygilly7964]

Do a 3rd gen Tacoma

[@rasleak8714]

Could use some help on my build 04 dodge ram

[@ladereksimmons]

ras Leak Right, have you did anything to it?

[@theurbanartist775]

Derek Simmons I have to my 05👍 check out my channel.

[@byrceblackshear4249]

2nd gen 1500

[@kaleblecuyer717]

cool