Hydro Dipping How to Beginners Guide.

[@baronteddyvonforsthoffer2567]

I haven't had much luck with hydrographics. So many videos and each one is different. I think I will just keep it simple like you did. Thanks for the video!

[@silviusoporan9556]

Incredible job.This is really one of the best looking paint jobs on a bike i've ever seen.I would love to have that on my bike.

[@2burning2turning]

Dave, your bike looks unreal. You’ve dove a quality job too. You’ve given me some inspiration to do a colour change on my speed triple.

[@randyleppell8885]

Great idea for cleaning particles off the surface of the water with the tape! Thanks!

[@Bugcatcher3d]

I like your little stands holding the parts while spraying. Looks custom but a quick vid on that would be awesome as well. Trying to figure out a neat easy solution for my painting as well.

[@cameronball4077]

I've been a subsciber for a few years now and this is probably the best looking speed triple ive seen in a while. Love watching all the videos, keep up the good work!!!

[@aiden20yearsago51]

How do you not have at least 500k subs ;-; I been watching ur vids for years. NICE BIKE looks sick!

[@vincentdahlenburg9474]

Thank you for the informative video. Your parts look amazing. This helped me to make the decision to get some materials and give it a shot.

[@snitz157]

Finally, a proper video about hydro dipping, I love it mate, keep up the mad work!

[@dantehooks1603]

Where did you purchase the film from and what type did you use? I seen a lot of different options for carbon fiber film

[@vanfritzcarniyan43]

to clean the water from film leftovers, you can use silkscreen or any fabric.

[@bagrbuckcustomhydrographic5697]

Great result guys :)

[@jayhow997]

The film took a while to flatten because of cold water it has to be warm for that reason. Top tip, de natured alcohol removes the hydro dip if you mess up but only in the first few hours before it's fully cured so no need to sand an start again.

[@hydeane]

The bike looks great, nice job.

[@Travelingman-1980]

Germany would be proud of the colour scheme.

[@rashadsmith3435]

Awesome! I love your videos man! They give lots of us inspiration to try new things! Rashad

[@the405show]

Would be nice to have the link to purchase the film and activator in the description bro. So we can purchase

[@danielito956]

That was badass to watch! 😃

[@ahmedothman3351]

Great work, I have a quick question. What did you mix with the 2K for the clearing part the end?

[@jonapach616]

Before u dipped it.. what colour you used clear or black colour

[@omarspost]

That's one of the best carbon hydro film ive seem. most look very obviously fake, but not this one. please share link to product

[@RicksWorld91]

Quality video and fantastic song choice!!

[@Kapil-Patel]

videos have always been fantastic and helpful. My only suggestion is a new mic or a dead cat for the existing one. There is a lot of background interference during the talking sections and a slight echo. hope that this is helpful.

[@andrewpaige9152]

Best place to buy file? Anything to put prior is there a kit to buy?

[@josephd.4890]

Love the bikes paint job

[@dalehawkes1594]

That looks awesome you have crazy skills 👍👍

[@Maltasgamer]

It like watching your dad build a wall but has no experience doing it hahah, great results though.

[@AdventuresinFabrication]

I'v been watching your video's for some time and I would really like to understand how you keep a white booth white with all the painting you do? It seems like there is no over-spray anywhere.

[@loopi222]

Adventures in Fabrication 8:37 They're temporary pop up walls, the 4th wall behind camera is a rainbow

[@deepakvasan724]

custom spray mods.excellent job.I have a doubt.u dipping the object on hot water or cold?

[@olderthandirt7023]

Thanks for showing us how to do it

[@armurak]

What the thing you spray to make glossy look

[@mochanics-transchanics4927]

Is it possible to have a parts list posted of everything I would need to do this at home?

[@theplayernkc]

In between the primer and first base coat, there is a "sealer" you spray on the primer to help with silver paint. What's the name of this, beside sealer? I'm trying to find some in a spray can and I can't figure out what to search for so I can purchase some. Thanks

[@10223220]

That looks very cool,thanks for the video 👍

[@camrendoucette5592]

are you going to do the final product of this bike i really wanna see it

[@anthonyscanterbury6982]

enjoy you video bro real simple 👌 where do you get all your supplies

[@richardjames26]

WOW... that came out really cool

[@johnboy5632]

Man that came out sick! I want to do parts on my Infiniti g37

[@croneous]

Where did you get that graphic once done it has great depth what did you use?

[@yahyaalassouli3530]

From where do you get those items that stabilize the items you want to dip?

[@darrenhill9931]

the parts were already dark colour before the plastic primer and pearl black ?? does the initial dark colour on the part make a difference prior to plastic primer and base-coat ?? and is pearl black the best base-coat colour ?

[@customspraymods]

darren hill the initial colour doesn't matter as long as you get good coverage with your basecoats. I like the pearl as it has a nice sparkle to it. Best to test which basecoat you like.

[@andrewpaige9152]

How do you take it off? If it’s a mistake how long do have to take it off quick?

[@50KUNTZ]

Where in Australia do I buy the activator from

[@dcswings]

nice job mate, will dip my Audi interior

[@jay-jj941]

Its really need to put plastic primer and top coat.. on a new buy parts or you can just dip it without primer and top coat

[@PuraLeche6942]

Bruh can you aleast say where did you get the film's . Or name of it .. I want to do that to some parts of my bike and car

[@nebur_9238]

What color should I paint the piece to have that result????

[@dylanvalide2673]

just have a question what was the name of the film you used ? and where did you get it ? thank you

[@ferdinandborromeo927]

What did you spray in the last part

[@AB-ns6ek]

Can i use clear coat substitute for activator?

[@Eaglesbloke]

Hey mate, I'm from Australia and wanting to get into hydrodipping interior bits on my cars, I'm a spray painter by trade also. How can I buy the activator off you?

[@whatyoudo9773]

nice technique and vid but the finished CF parts dont really look like CF to me, just looks like a dark-grey pattern of some sort.

[@RealDarkBlade]

Are you using "regular" paint for plastic?

[@beatricethemiata8565]

Great video dude

[@spartanrider5614]

how long did you wait between primer and base coat

[@mtuningg.g9617]

Good afternoon, what is the carbon paper number. or where to buy it. I need for wheels. thanks in advance.

[@rexotutini3667]

Thats choice az, I'm gana give this s go on my bike

[@noobrefinisher5443]

im trying to do this without real activator its homemade and using a really bad spray bottle doesnt work well and also got no base coats because i have no acces to anything

[@samweir7197]

Instead of clear coat, can you use resin instead to get more depth?

[@customspraymods]

G37 Sam sure if you get a super clear resin. Also the UV stability of resin may not be as good as 2k clear.

[@andrewpaige9152]

How durable is it? Can you wash over it? Heat resistance?

[@customspraymods]

Andrew Paige it's got a clear over it so it's just as good as any painted surfaces

[@Marcus_from_OZ]

Nice work.

[@sonitaaa1]

how you get the matt in your base paint(the black pearl)

[@darkndarker138]

what is the activator

[@zgjfinance2796]

The McDonald’s bike is sick

[@zkzk91]

what does the activator mean? from where to buy it?

[@doganarslan6571]

Great job man

[@larrykelley1818]

Is it ok if I use the rust oluem plastic primer

[@gunnyu.s.m.c8606]

can you get bigger film as in a roll??

[@emanuelorama7749]

Been watching your vids since day one man keep up the excellent work nice video

[@khaledabuoun2260]

Nice video and also useful

[@squirrelkilla7371]

How durable is dipping? I know you shoot clear over after, but would it work on a valve cover?

[@customspraymods]

It works on valve covers. kzbin.info/www/bejne/pnOykIykmbxlmbc

[@SwagA52298]

where did you buy the film

[@johnlua2940]

Can I know where to get these carbon fiber film from? Maybe reply it with the link

[@niva-orruvio1312]

Beautiful job thank you

[@mickholgate3347]

Good job Dave!

[@agentone8511]

Will it stay if you wash it

[@maggiosei265]

Prior of setting the film unto the water. How to know if the film is carbon fiber or not?

[@customspraymods]

Maggio Sei you can hold it up to the light.

[@togrodowczyk]

where are you taking your films from?

[@SMU_3L]

I wanna see the Speedy finished!!!! I’ve just got my new Street Triple S :D

[@SMU_3L]

Commented too early. Fuck me that looks amazing. Need some black or gold levers now

[@danssv8]

I like how you say it's got some leftover film and jizz over it , ha ha.

[@keithrozeski8463]

You hv to use clean warm water each time

[@jhulzjhulz3932]

What is paint activator.. It is primer..

[@dominictano2462]

Sir what is your activator

[@Thatguy-dk8zm]

how long do you have to leave it before rinsing with water and where we buy that stuff

[@customspraymods]

Leave it for about 10 min. Search online for the films. There are plenty of places to get them from.

[@pauldavison7105]

Check out Big Brain Hydro graphics on Facebook. The pro,s rinse immediately

[@alexanderalicea1931]

Good job

[@brucebryand3101]

what is that you spray before you dip it ?

[@customspraymods]

Bruce Bryan Daligdig basecoat paint.

[@wittgutierrez442]

I want to start a small bussiness like this here in philipines..but how..plss help me..

[@doganarslan6571]

Hi do some have the activator formula

[@seyedebrahimazad8416]

Hi friend I am from Iran and I'll talk with you're lives in which country you

[@kocakayapansiyonbungalow1311]

Please New Helmet or kask painting

[@richardjames26]

Do you guys sell the hydro film and activators ?

[@customspraymods]

The activator yes. But not the film.

[@airsoftcoop3587]

Where did you buy the film from?

[@customspraymods]

Cooper 4922 online.

[@AiBilly]

What was that 4:10 ?

[@teez3093]

4:45 "the water got activator and leftover jizz all over it" 😂

[@alinehme9390]

hey buddy, i enjoyed your video :) where can i get some good film out there with los of choices

[@Nandhakumar-wl5wc]

Pros and cons of hydrodippping

[@davo7512]

So I’m building a solenoid v8 replica should I make it chrome or Carbon Fiber?

[@geopin7672]

Nice vid 🤟🏻

[@SanDeep-iw4iv]

where can i buy this same hydro film ?

[@nutcharaof4827]

so good