CUT DOWN RED WING 877

Serviced By Brian the Bootmaker
Cut down to 7 eyelets
Follow me:
INSTAGRAM: / brianthebootmaker
Contact me: [e-mail]
Subscribe to this channel:
ROLE CLUB: / @roleclub612
Music by: Audionautix.com
Acoustic/Folk Instrumental by Hyde - Free Instrumentals / davidhydemusic Creative Commons - Attribution 3.0 Unported- CC BY 3.0 creativecommons.... Music promoted by Audio Library • Acoustic Folk Instrume...
Acoustically driven instrumental by Hyde - Free Instrumentals / davidhydemusic Creative Commons - Attribution 3.0 Unported- CC BY 3.0 creativecommons.... Music provided by Music for Creators • Acoustically driven in...

[@ubroberts5541]

The love and skill it takes to do this should never be lost.

[@or9481]

Great work. Each step.

[@ginnysimpson5232]

Brian, your work is so precise. I enjoy watching you so much.

[@davidhenley3967]

Brian you are so talented. And do beautiful work.

[@dennisthemenace5150]

Have a pair and love them for 2 years now.

[@billynunns]

Fantastic!

[@michaeldawson217]

that’s a badass design

[@gavynmacdonald6647]

This is so Awesome! I wonder, could a 6 inch moc toe boot be cut into an Oxford shoe?

[@RatdogDRB]

Nice cut-down. A little surprised at no pull loop. Congrats on the new signage (boot). Hope your Independence Day was a good one, young man.

[@guystin8381]

woow ..top👍👍👍

[@stepanrydel5446]

Hi Brian, I’m really enjoying your videos and your craftsmanship. After I saw this video I start to thinking of shortening my work boots. I would like to cut them right under the Dunlop sign where the double stitch is. I can’t upload the picture of them though. They are Dunlop Nevada safety boots. I am a bit concern about the structural integrity of a whole boot after cutting and also the comfort of wearing them. Maybe you can give me some advice. Keep the good work and thank you for any answer. Stepan

[@csnelling4]

Great work👏👏👏👍🇬🇧

[@aza1977able]

Очень круто Наш отдел полиции смотрит твои видео в обеденный перерыв 😀

[@RubbelisPro]

I was surprised by how thick of a leather you used to line the coping of the boots on top, must be really comfortable! Nice!

[@Joemama13479]

great job Brian how is that pick up truck doing ?

[@Idolmakercat]

Mr Srappitty brought me here.

[@keokimalulani3354]

I'll role with the shirt in AZ

[@RE-vl8ii]

These end up 6 inch or 7 inch?

[@何西恩]

你的工作室好大，很喜歡你的影片，要繼續拍喔！

[@rodolfomfragoso5328]

Another Red Wings video 😑, c’mon dude show us something different

[@dannysunay8099]

Dude, make your own videos! Start with your chanclas!!!! I would watch it!!!

[@rodolfomfragoso5328]

As you wish Sunday dude 😂

[@GS-st9ns]

You take such pride in your work. I love seeing you do cutdowns and resoles everything. I was hoping you would give the boots a good scrubbing down at the end I love to see how they're shiny and clean as well as cut down. Excellent job

[@hermyherm365]

I’ve always liked these boots but no a fan of the soles ... love this channel buddy ! Much love Brian !

[@LyndseyMacPherson]

Same. In one of Brian's vids from a few weeks ago, he actually puts proper soles on a pair of redwings. They're beautiful.

[@edrader]

@@LyndseyMacPherson "proper soles" LMAO!

[@BaltimoreMaryland]

I'm not a fan either..the dont look all that great. They are super comfortable though.

[@glock1inthetop45]

Mad Knobby they look good to me and are more comfortable

[@RubbelisPro]

I think they look alright with half soles and a heel, but I have no problem with the factory crepe soles.. Super comfortable. I guess you don't pay much attention to it when you wear them for work.

[@Sifo_Dyas]

Really nice change of pace. We see so many resoles--this was really cool to see something different. Funny that the customer wanted the old Red Wings tag--I wouldn't have cared about that--I'd take a Role Club instead!

[@dsm811]

should of left the pull tab on the back of the boot...

[@Nobody4rpresident]

Now let’s see you turn a pair of 875 Red Wings into 877’s! 😎

[@jonkomatsu8192]

Once again , tremendous care and craftsmanship. Just your concentration reattaching the RW label alone speaks volumes. And looking forward to snagging the new t-shirt. And also to eventually make it down to LA to check out the yellow boot. Great video,mahalo!

[@lkings777]

Stop with the music. Let's hear what you are doing. You could be the Bob Ross of shoes!!👍🏻

[@vilhelmleons9631]

Surprised you don't have some 1800s Zippo found in the bottom of a copper mine. Lol

[@anthonymoreno1967]

Hi Brian I'm new to your channel really enjoy the your videos a lot especially this one was very cool Your videos are very relaxing keep up the good work

[@marcusm5619]

Wow! Such awesome work, precision and care you take on the RW 877! Very impressed!

[@edsonhilario1097]

Brian, seu trabalho ficou muito bom 👏👏👏👏!!🇧🇷🇧🇷

[@grnblk2937]

Cool, enjoy the change of the shoe...good job.

[@aribowo9364]

Hi bryan, i'm come fr indonesia. We are said KEREN

[@rross5843]

The Dynamic Duo. You guys are amazing in your craftsmanship. The shoe shine done by The Mentor.... Loved it! I have an old pair of Red Wings in need of repair. I look forward to having my boots done by Role Club.

[@partsflight7721]

Its an art work that you have mastered 💯💯💯

[@davidd6277]

merci pour tes videos,j'espere que l'on se croisera en france ou LA

[@thetasters]

I just bought a pair of Estwkng 6" moc toe. It thanked me woth a big ole blister on the back of my right foot. They fit great otherwise. I assume this is the breaking in period I keep hearing about and that they will get better with time?

[@stephaneaudette6665]

Definitely a good job... Great work

[@aqilanwarrivera3503]

I'm gonna need a t-shirt. I watch your videos and go into my calm zone . Love your work "Role Club"...

[@SteeringSteel]

Great vid Brian! I’ve been doing this to my Thorogood boots for almost 20 years, it makes them so much more comfortable to wear.

[@andygarcia6879]

Why are you using the pen in that form without the body?

[@toughlifevirgina]

Oh man, I just bought some 877s because of the height and now you're giving me second thoughts, Brian! Would love to see a moc toe cut down to maybe a chukka style? Or the 877 cut down like this boot but keeping the pull tab at the back. Also that T-shirt in white with kelly green print like your old style would look great and you'd get my money instantly! Great job as always!

[@rodeastell9726]

I love the 877 and would never think of cutting them down .. however I have pairs of 6" Redwings too so .. but I love my 877s ..

[@iainmceachran321]

I used to get shoe repairs done by an old timer, Geordie Arthur, he had similar equipment to you. I'd have loved to see him working on them and your channel allows me to 'see how it's done'. I thank you very much. Keep up the great work and keep learning. If you ship t-shirts to Scotland let me know please. Shine on!

[@leonardburns1780]

thats a job done with care and pride not much of that any wear these days ehhh

[@MansaNze]

How much does that cost to cut down a boot?

[@krisfei4499]

Hope one day to visit. Thanks for the video.

[@watchmanexpert]

I want do the same to mines , how I can contact u ?

[@bngr_bngr]

Why didnt you keep the pull tab on the boots.

[@dam1041960]

My your hammer never be with out nails. And your blades never dull. Roll on my friend.

[@JASASUR.]

Amigo habla en Castellano

[@aaronmorris9304]

What child was wearing these? 9d ?

[@moisesmera7913]

You would never know they were cut down

[@iZZy973]

I have a pair of J. Crew Red Wing Wabasha boots that I’d like to get cut down. How much does this cost?

[@BrianTheBootmaker]

Thank you for the interest. You can contact me via email. [e-mail]

[@mdeejohnson7868]

I need RIPPLE SOLES FOR MILITARY 1986 US ARMY RECRUIT BOOTS, CAN YOU HELP

[@BrianTheBootmaker]

MDEE Johnson yes. Thank you for the interest. You can contact me via email. [e-mail]

[@manolitoaquino6829]

Were your location.pls...

[@JC_ORTIZ]

Redwing 876 🔥🔥🔥🔥🔥

[@DenimDarlin]

Thank you for another great video, Brian!!! 👌🏽👏🏽👏🏽👏🏽👏🏽👏🏽

[@72polara]

I enjoy these cut down videos. When you are done, it is like you were never there. Your work blends in so well. Very nice!

[@tuffstuff9809]

use a torch lighter mijo

[@noelvega5993]

Much love Brian....great job on the cut down....i guess the anker was getting to heavy for him so had the weight reduced lol....work wise superb job 👍👍

[@danielirvine7468]

Much better great job

[@manolitoaquino6829]

I want too cut my boots..

[@marcoantoniochino8686]

Muy buena tu trabajo,,,, una pregunta como reduzco de talla un zapato. Se podrá..??? Gracias

[@richshackelford5793]

Great video Brian

[@scottdavenport1833]

Wow.....just Wow!

[@asephilmansyah2803]

Mantaaff brow..

[@garywaggoner1953]

Nicely done!

[@cardsharkhiroller6059]

Amazing skill you make look easy nice work brother 👏👏👍 from Chicago

[@dalphin121]

Awesome 👍👍👍

[@adangarcia1973]

Orale q bien

[@ericgonzales854]

Always cool!

[@kissayounis1495]

Very nice

[@artistmac]

The steady hands of an artist. Leather, thread and metal instead of canvas.

[@wrbwn]

I look forward to your videos. Always entertaining. Usually educational.

[@mistilteinn3670]

Does this man's repair shop still exist? I'm from Belgium and looking for a good cobbler.

[@dumbernews]

👍🏻👍🏻👍🏻👍🏻

[@carlnorthcutt8383]

i love when you Hi i'm brian the boot maker,,,,,,,,,i have several pairs of boots i learned so much from you in taking care of them

[@davepelfrey3958]

Excellent job and attitude as always. Love your video's. Stay safe.

[@mihaelark6107]

Nice video Brian! How nice to see old shops in their original look! There are few such stores today, which have an original look! These today's modern di everything is in place, they look kind of sterile, they have no soul! Go on! God bless you! Greetings from Croatia!❤️❤️💪💪💪💪✌️☺️

[@senenmarroquinescorcia5304]

Hola espero me puedas mandar saludos te sigo desde Acapulco Mexico...

[@dmedina6835]

Have you ever thought of redoing the store front - black and yellow - role club boots?

[@denihalim8191]

Kereeen...👍

[@davidmillhollon486]

I wish I had your skills to learn the basics of what you do in your career but I am fitting cancer now ,your avery move is like a conductor you're are blessed.

[@АлександрМачнев-ф9э]

👍👍👍

[@renatovazpinto9023]

🙃

[@thebeardedgeek2100]

Awesome video as always, but I have a question, where do you get the brass handle knife you used in this video ?

[@eleven.eastgate.twelve967]

Fantastic customization... And by watching closely I picked up a couple tricks of the trade; 2 sided tape for accurate label placement, moving boot on sewing machine for tough corners to sew, melting thread with a lighter. I dont know if that was intentional, but thank you for the knowledge! Hope you had a Happy 4th! #BlessUp P.S. Lemme get 2 shirts (XL) please... Thank you!

[@IPv6Freely]

Basting tape is a must! I use it for my labels on all my products (backpacks and accessories) as well to hold the label in place while stitching.

[@rizkiaditia7611]

Hi brian i want to ask about "trincetto leather knife". I want to bought trincetto. are you give me information where can i get. Thank you brian.

[@andrynurdiansyah8773]

Awesome.. Hope in indonesia have boot maker like you

[@pauloesb1]

Beautiful

[@bpowa]

Beautiful work. I wonder if it cost almost as much as new boots to modify it.

[@addictedtoeverything]

Fantastic work wow that is amazing what craftsmanship you have

[@johnfenton9283]

What’s you’re favorite boot under 300 and over 300?

[@hanhan4631]

So amazing... Good art works so clean cuts

[@benmason1469]

My Grandfather was a boot maker I even still have his skiving knives

[@rickr9055]

Another great video showing that if your customer can dream it, you can craft it!

[@robertalexander7661]

I really like the moc toe. Now after seeing the tall ones, I like them!!!

[@RodrigoSilvaAdv83]

Que coisa linda irmão, show! 🇧🇷🇧🇷🇧🇷

[@lndrvrus]

awesome job. excellent craftsmanship

[@bluesman97]

Fine Job Young man.. Keep up the good work.