Cute isometric kitchen - Blender 3D beginner tutorial - Part 1

[@mila5403]

For anyone struggling with the extrusion after the inset (stove), check the limit method in the bevel modifier and try different options like “weight”. Mine was set to “angle” and I changed it to "none" :) Amazing video, ty!

[@angrygoose6324]

tysm! I had the same isssue as well😭

[@anastasiaa.2542]

Thank you so much!

[@ryzky1776]

THANKS

[@eliasdiestler5869]

Tran, I have been wanting to be a 3D artist for decades and never took the plunge. I found an Instagram reel where someone mentioned this tutorial (the bedroom one actually, but I had to start simpler), and after working on this for a few hours I already feel 500% more confident in the program. To newbies I highly recommend enabling CC, setting the video to .50 speed, and disabling audio for ease of going back! I hope to share mine once I finish. Thank you again for all of your tutorials!

[@laurenmetcalf9881]

Hi I've been in love with your progress for ages I'm glad you've started a channel!! I'll be sure to follow your tutorial I love the softness of your style

[@artbytran_]

This is so sweet, thank you for your support! Let me know if you have any questions on the tutorial

[@melspals4193]

Thank you so so much for doing the tutorial. I can’t imagine all the work and effort you put into making this!! Going to try and follow this - I can’t wait !

[@mirasfanfiction]

Thank you for this video! In the next one, would you be able to move the captions higher? They are EXACTLY where the play/pause/runtime bar is, so it'd be a bit easier if they were a bit off from the bottom.

[@artbytran_]

Noted! Thank you for pointing this out 😊

[@fabcat9372]

yeyyy i finally finish this tutorial part 1! Thank you so much for the efforr you put into this tutorial! may your pillow cold on both side everyday!

[@yourgothfriend]

for my fellow newbies on a mac: i couldn't figure out the keyboard shortcuts for 1:39 BUT i found the button, its the 3rd one to the right of the "edit mode" drop down menu. i have a feeling i'll be back here with more notes 😂 2:31 gave up and added the shortcut in preferences it now maps to ^ Numpad 2 *edit* ok my floor wouldnt go out of pancake mode so i backtracked on it to get it to a usable point and then literate everything went wrong working on the floor boards so i'm going to go find a different tutorial and revisit this one later 😭

[@katyaklkk6889]

same pancake situation at the 3:00 ;( did you find a solution?😊

[@ghost-cathedrals]

I struggled with getting the bevel effect to look the way it does here, even though i kept setting the Mean Bevel Weight to 1.0 - it always ended up too rounded - and the solution that worked for me was: 1. In the geometry menu under Bevel modifier settings, turn off the Clamp Overlap checkbox. 2. Reduce the Amount to like .01 - 0.025. 3. If necessary, add more Segments.

[@artbytran_]

Thank you for sharing the tips! Ctrl+A to apply scale may also help 😊

[@basiccomponents]

@@artbytran_ this worked for me

[@erikasun6472]

Can't wait to get home to try doing it! It's beautiful

[@artbytran_]

Let me know if it’s easy for you to follow 😊

[@RatMansVlog]

I'm loving doing this tutorial so much. Very relaxing to follow along, and such adorable and satisfying results!

[@artbytran_]

Thank you for watching 😊

[@freakkins4972]

I'm really looking forward to the second part!!

[@artbytran_]

the second part will be released this weekend!! xD

[@silviaa.s8432]

hi, it think for next the tutorial please use a voiceover to make us easier to follow your step :) thank you! it's a cute kitchen by the way

[@artbytran_]

Thank you, I will

[@CarlosMagno3DArt]

Wonderful tutorial on how to model a cute kitchen, thanks for sharing

[@mprayagraj]

Super excited for this

[@m__s5455]

Thanks for making this lovely tutorial, very simple and easy, can't wait for next one. 👍

[@artbytran_]

You’re welcome 😊 The next one is coming soon!

[@fajarmasterduel8142]

Cant wait for next partt, thank you befor, now the speed is acceptable 🥰🥰

[@artbytran_]

The next part is coming soon! I will upload it this weekend 😊

[@tahuangkasa]

please share your lighting and render setup.i really love it

[@shynnobi]

Lovely!

[@melttt]

little late to the party but i'm here! great tutorial

[@cloverxx988]

this is a great tutorial! but every time I try pressing tab and go to 'edit mode', my screen keeps freezing. I thought it was something wrong with my settings but the strange thing is my blender only freezes when I go to 'edit mode', and works when I'm in 'object mode'. Is there perhaps a way to fix this?

[@TheAlphaGames]

When I add a subdivision by pressing Ctrl+2 the walls disappear right away :( And when I add a bevel it comes back, but if i put the bevel above the subdivision it disappears again Edit for anyone having this problem its a GPU issue: Click "Edit > Preferences..." on the menu bar to open the Preferences Window. Then Switch to the "Viewport" Tab, click "Subdivision" and uncheck "GPU subdivision" below. Now the object should be visible.

[@juliannarenae8578]

Oh my gosh thank you, this was a problem for me. Ur a lifesaver 👏🏼👏🏼👏🏼

[@niharikarao9969]

Hi! This render is so adorable it caught my eye and I started working on it today. Iv reached till the fridge but I am unable to intrude. Whenever I press I after selecting the front face it shows nothing is elected in properties and it makes no difference to the face whenever I pull it. Im using a Mac if that helps. pls lmk what to do. how did u select the face basically im not able to

[@niharikarao9969]

nvm fixed it

[@duongthuy6185]

eo ưi c làm đỉnh thế ạ huhuu

[@artbytran_]

cảm ơn em

[@ameeerr2834]

Thank you so much for such a nice tutorial, please keep it up we are with you. Your style of modelling is great. Also just a suggestion, it would be really great and easy if we see voice in upcoming videos to explain the procedure. Wishing you very best ❤️

[@artbytran_]

Thank you for your encouragement! I'd love to do voice over but kinda afraid that my accent would make it hard to understand 😅

[@ameeerr2834]

@@artbytran_ I can feel it, but you’ll get comfortable after some videos. Anyway I was waiting for 2nd part and finally it’s released, I’m so eager to watch.

[@hanabi897]

que hermoso, me gustaría que aumentaras la escala de resolución al menos a 1.10 porque las letras de interfaz se ven muy pequeña y me cuesta verlas:c

[@blxssmss1764]

I love ur video! I saw these on insta and really want to learn how to do this! I’m struggling in the fridge part however! I do the same thing as you but then when I apply bevel the edges are a bit round but kind of bulky and don’t turn very round like yours do! What would you recommend trying?

[@artbytran_]

If you can, screenshot it and send me the pic on IG. I’ll try my best to help

[@tranminhphuonq]

Chị ui làm video tutorial bed room đi nó xịn wa 😊

[@artbytran_]

cảm ơn em chị sẽ cố gắng làm nhé!

[@Serenditya]

Sorry but, what do i do when you say hold x-axis i'm still confused what key do you hold when stretching the front of circle on the top of stove? :

[@niharikarao9969]

hi did you figure this out? im struggling with the same thing lmao

[@Topustudying]

Hi! can I know what software you use to record your process? Thank you >3

[@stargateheaven23]

When i created the plane for the fridge, it appeared as big as the flooring. Yours was smaller. So i resized it. Why is that? Then, you said the dimensions of the fridge are 1x1.5x2.5. How can i set these values?

[@camhanhuynhthi6377]

Chị ơi, mng ơi giúp mình với ạ, mình set mirror như chị nhưng nó không nằm đúng vị trí như của chị :

[@eleanorrigby4780]

What's a good device to use for blender? Wacom tablet?

[@daigakrivane]

Hey, im new to blender And As I saw You Using The Transform Or Idk like the menu that Has the edges data It wasnt Visible for me? Is there a way to turn it on?!?!?

[@artbytran_]

is that the one on the right? if so, you can turn it on by pressing N on the keyboard

[@AnaSt788]

I have some issues with a cooking range. I almost finished with the tutorial without having any big problems. But my cooking range base is just not working. Once I copy modifiers from the wall or put them separately it got sharp edges (no bevels visible at all) not like the top part of my cooking range. It seems like it has its own mind lol. I tried even to create it from zero few more times, but I find the same thing happening over and over again. I didn't have this problems with other objects. Please help. It seems like I'm making the same mistake, but I can't see where.

[@artbytran_]

If possible, you can send me the screenshot or the blender file so I can take a look

[@aramss1949]

is there a way to substitute using a mouse wheel to increase the cuts? I'm currently using a trackpad and just wondering :)

[@studioneptune]

just use two fingers the same way you would do to scroll on pages :)

[@elsapang149]

Hi, I'm stuck on the floor part. After I loop cut the floor part initially and try to alternate between 1 to 2 loop cut, it only cuts the entire floor instead of the individual floor boards. Thanksss

[@elsapang149]

Figured it out XD

[@vinegorre]

What was the solution??

[@vinegorre]

I’m having the exact same trouble

[@magiclyricks]

how do you do the x axis thing how did the arrows just appear?

[@krissamei]

I don't quite understand what we are doing when we use the bevel tool for the tiles. I'm stuck on that because I don't know which direction to bevel!

[@krissamei]

OH I figured it out!

[@juliannarenae8578]

Hello!! Quick question, at 8:11 for the stove the bevel doesn’t seem to be working properly. I added it though the modifier section and changed all the settings to be correct, but it is still very blocky with the edges not curving as much as they should be. Any solutions?

[@artbytran_]

Hi, you can try pressing Ctrl+A then apply scale to see if it works.

[@cimi2022]

13:50 Question, can the knob be mirrored? and another question duplicating the knobs consumes more memory, maybe?

[@artbytran_]

I'm not sure which one will consume more memory, but yes, you can use the mirror or array modifier on the knob to achieve the same result. I hope this answer your question. Let me know if you need further help.

[@brayanarenassucerquia1122]

Hello, can you help me with something? I am following the tutorial to the letter but the "rem" button does not appear at the top right, can you explain how to activate it?

[@alisiaval]

3:49 i not understand why faces not delete. and my floor solid

[@lildolores8731]

Hi 💞💞🎐👋 i copied modifier for the cookin range but it didnt work. i made increase the mean bevel weight to 1 but nothing changed at the cookin range 🥴 where did i do wrong ?😿

[@artbytran_]

Maybe try adding bevel modifier directly to the cooking range, then place it on top of the subdivision and see if it works. Let me know if you need further help

[@lildolores8731]

@@artbytran_ i tried and it worked😊thank you master Tran🎐🌟💞

[@eve_attempts_art]

4:18 my tiles aren't stretching when I use E. Can someone please help? 😭

[@albagonzalez1268]

At 2:57 i'm trying to right click the object so it opens the menu where i can "shade smooth" but doing right click won't open any menu :(

[@artbytran_]

make sure you are in the object mode. You can press tab to switch between edit mode and object mode

[@albagonzalez1268]

@@artbytran_ oh okay, thanks you so much for your tutorial and for replying!

[@SAKURASWEETHeart3]

I can’t get the top of the e fridge to round when I bevel

[@SAKURASWEETHeart3]

I got it to work when I opened an earlier ave file I don’t know why it wasn’t working before

[@미아아아]

1:02 how do I get this transform panel?

[@artbytran_]

press N on your keyboard to open it

[@미아아아]

@@artbytran_ thank you for the fast answer! but it doesn't open the transform panel 🥲

[@artbytran_]

oh, there is a small arrow next to the gizmo (the xyz thing), try clicking on it to see it it works

[@elifnurvarl5622]

i can't find how to do ctrl+2 on macbook can someone please help me?

[@artbytran_]

In the right panel, you can go to modifier properties and add subdivision surface modifier, then set both viewport and render to 2

[@anoushka3195]

i can't figure out how to do the alternating cuts on the floor, would anyone mind explaining?

[@artbytran_]

You just need to increase the number of loop cuts in between using the mouse wheel

[@anoushka3195]

@@artbytran_ i could do the vertical lines but the horizontal alternating cuts seem impossible 😭

[@artbytran_]

Press Ctrl+R and try moving the mouse near the edge, to see if the cut line appears

[@fanta2468]

7:30