Cutting an arc on a rotary table

  Рет қаралды 607

Gary's Garage

Gary's Garage

Күн бұрын

First try at cutting an arc on a RF45 mill using a Vertex 8" rotary table. Machining using a 1/4" HSS endmill in 3/16 plate. Part is for the stylus assembly for a Darex E90 end mill sharpener.

Пікірлер: 4
Where DO screws come from?
18:33
Where DO screws come from?
Machine Thinking
Рет қаралды 2 МЛН
The Steel Rule
13:58
The Steel Rule
Museum of Our Industrial Heritage
Рет қаралды 392 М.
Миллионер | 3 - серия
36:09
Миллионер | 3 - серия
Million Show
Рет қаралды 1,5 МЛН
Twin Telepathy Challenge!
00:23
Twin Telepathy Challenge!
Stokes Twins
Рет қаралды 60 МЛН
Players vs Pitch 🤯
00:26
Players vs Pitch 🤯
LE FOOT EN VIDÉO
Рет қаралды 128 МЛН
小路飞还不知道他把路飞给擦没有了 #路飞#海贼王
00:32
小路飞还不知道他把路飞给擦没有了 #路飞#海贼王
路飞与唐舞桐
Рет қаралды 81 МЛН
Rotary Table Basics
23:01
Rotary Table Basics
Joe Pie
Рет қаралды 206 М.
I Bought a Cheap Rotary Table Which Was a Big Mistake
17:42
I Bought a Cheap Rotary Table Which Was a Big Mistake
Artisan Makes
Рет қаралды 172 М.
Homemade Lever Operated Rotary Table for Milling
11:25
Homemade Lever Operated Rotary Table for Milling
Cam Engineering
Рет қаралды 42 М.
Milling Curves With a Rotary Table - Hemingway Sensitive Knurling Tool Build - Part 3
22:02
Milling Curves With a Rotary Table - Hemingway Sensitive Knurling Tool Build - Part 3
Clough42
Рет қаралды 37 М.
Tapering Train Rail
3:23
Tapering Train Rail
Randy Smith
Рет қаралды 4,5 М.
How to mill a radius larger than your rotary table
8:39
How to mill a radius larger than your rotary table
bcbloc02
Рет қаралды 17 М.
Some geometry basics and cutting Tangent radii
34:12
Some geometry basics and cutting Tangent radii
Joe Pie
Рет қаралды 47 М.
Vevor 8" rotary table
14:20
Vevor 8" rotary table
Gary Huston
Рет қаралды 6 М.
MACHINING a Rotary Table alignment tool
14:44
MACHINING a Rotary Table alignment tool
Machining with Joe
Рет қаралды 19 М.
Center a Rotary Table in Under a Minute Without an Indicator
4:40
Center a Rotary Table in Under a Minute Without an Indicator
Toms Techniques
Рет қаралды 117 М.
Миллионер | 3 - серия
36:09
Миллионер | 3 - серия
Million Show
Рет қаралды 1,5 МЛН