Cutting bands video 1 (using a template)

This video shows how to use a common style of taper templates. If you can find one for your taper or order a custom one...its well worth the money! Watch part 2 on how to use the adjustable taper ruler.
Click this link below:
• Cutting bands video 2 ...
Get your slingshot needs over at SimpleShot based here in the USA.
simple-shot.com?ref=slingshotfever

[@edmundodonnell6636]

Love your videos mate keep the knowledge going

[@SLINGSHOTFEVERpullshootrepeat]

Thank you. Will do for sure!

[@Kaizersoze19]

Ty for sharing your knowledge! U taught me a lot! I got a question can u help me? Having a draw length of 73 cm and 18 cm of active band length (4,5 elongation factor) not counting 2,5 cm for frame and pouch tie, is a 170 mm taper useless (too short) for me?

[@SLINGSHOTFEVERpullshootrepeat]

For a 4.5x's elongation it would be too short but it would be closer to a 5x's elongation which would be fine.

[@Kaizersoze19]

@@SLINGSHOTFEVERpullshootrepeat ty very much! 💪🏼💪🏼 To be well covered i’ve bought five different jigs (on sale), 170 mm (19-11 22-12) 200 mm (20-12) 230 mm (23-13 19-11) Hope they will work great for me.

[@SLINGSHOTFEVERpullshootrepeat]

Have fun experimenting!

[@escobedormz1]

Donde puedo comprar la plantilla de acrílico la quiero conseguir saludos desde Mty NL MX

[@SLINGSHOTFEVERpullshootrepeat]

You can order them from GZK or Snipersling. I got mine from AliExpress.

[@jhonisestilingueesportivof3823]

what are the dimensions for butterfly shooting and tape thickness thank you friend

[@SLINGSHOTFEVERpullshootrepeat]

That would depend on your draw length and the ammo you are using.

[@syouqsyouqree7381]

🙋🏻 another knowlege i get from u...t.q

[@SLINGSHOTFEVERpullshootrepeat]

Thank you

[@Zerpersande]

Either you’re using a dull blade or you’re pushing way too hard.

[@SLINGSHOTFEVERpullshootrepeat]

No, the thickness of the taper template will not allow the blade to make contact if not holding it at a 90 from the template. This is due to the shape of the cutter and not the blade. Some roller cutters will not work at all because of the thickness of the template. Or worse, will only work with thin latex. Then you have a sheet of thicker latex cut halfway thru. I have a few that will not work with a 4mm thick template.