She fighting you. But your getting the better of her!. The shorting of the back so makes the car. Waiting till next video drops
@philjohnston9616 Жыл бұрын
This build gives me that " kid at Christmas feeling" as I follow your progress. One of the coolest builds on KZbin. Thanks heaps for sharing
@tmaurer8976 Жыл бұрын
I felt the same way with the Napco just because I love them.
@philjohnston9616 Жыл бұрын
@@tmaurer8976 Yea man. Second that !!!
@srtautoworkz Жыл бұрын
Shortening the rear was definitely what she needed, looks great!
@terrencebuller7676 Жыл бұрын
Greetings Brent, shorting the rear gave it a really good look. 👍 Take care and be good.
@kurtludwig6962 Жыл бұрын
Wow didn’t expect it has a good flow & looks a ton better
@frankkirby5763 Жыл бұрын
The chop looks great. That thing is shaping up nicely now. Excited!
@wolfgangricky Жыл бұрын
Personally, i like that you are Frankenstitching parts from the other car into this car. Reusing rather than just creating from new. Kinda like killing a deer. If you don't use up what you harvested, then it's just a waste. That & you can say, yup, it's all made from 35 parts & pieces. Modern has its place , yet reuing so much of the 2 to make one, is more impressive. Ty for taking us along
@Phil222425 Жыл бұрын
Unbelievable , if I didn't watch the transition I almost wouldn't believe it, she's turning into a real beauty!
@jimcole389 Жыл бұрын
Now that is a winner I will never doubt you again sir
@kenlangbridge9907 Жыл бұрын
I’m constantly amazed how you can shape these rusty, end of life crappers into mobile works of art.
@stevenoel3280 Жыл бұрын
I'm 76 years old and disabled. I can no longer work in the shop, so I live it, by fellows like you, that do what is still in my "want to", but not in my "can do". I like where you are headed with this build. There is still a massive amount of work to be done. When I was 5 or 6 years old my dad had a 35 Dodge sedan, similar to the one you cut the roof section from.
@johnpassmore8176 Жыл бұрын
That is a real good look Brent. Shortening was the right thing to do. Great job as usual. Great video. See you next time
@aceadman Жыл бұрын
Shortening was definitely the right call. Looks great. 👍👍😊
@markmclellon8516 Жыл бұрын
B pillar'd again, dat driver's side roof panel tweak'd, cut'n da whole car in 1/2, sectioned da rear quarter 5 3/4 " outa da butt end. Hi Pablo!
@jjock3239 Жыл бұрын
I don't know if it was Michaelangelo himself, or some sculptor that came later that said, "To make a David or a Venus, you get a piece of marble, and chisel out everything that doesn't look like David". I love your attitude and the perseverance you apply, to make whatever the job is, turn out the way you want it.
@keonikaig9247 Жыл бұрын
And thanks for taking us along.. 👌
@robbieautrey3158 Жыл бұрын
WOW Brent you sure got the Designer Eye man. Top looks great from were i'm sitting but i'm sure you know what it needs. Those magnets are cool to and moving the back half up really makes it all flow together so much better. I like that you said everything that you do is "SELF TAUGHT", can't beat learning it on your own by trial and error.. Much respect brother..
@dav1dsm1th Жыл бұрын
Thanks for the videos. Stay safe out there.
@derrillbalshaw1199 Жыл бұрын
Love how you fearlessly slice and dice and weld it together, and make it look great. Loving this build. Keep the vids coming.
@papeep2694 Жыл бұрын
I was on the fence about shortening the rear section but seeing it after cutting I have to say it works just fine. Going to have that coupe vibe. Winning! Thank you for sharing the process/progress. With the shortened wheel base I could see it with tires in the tubs or big fatties without tubs. Either way, winning!
@robertjones1386 Жыл бұрын
Glad you could use those magnets I never know what to get you when I'm at princess auto or Canadian tire I just seem to grab anything I think you can use.
@HalfassKustoms Жыл бұрын
Thanks much for em :)
@glennnickerson8325 Жыл бұрын
It's 971 miles to Chicago-- we have half a cylinder of gas--a quarter roll of wire--it's dark out and we're wearing sunglasses.. HIT IT! 😎
@darrenmilford1573 Жыл бұрын
We're on a mission from God!
@tomeverett612 Жыл бұрын
Hello back in 1974 I was painting cars it's time I took out a body shop we fix things with lead and if you want to shrink the metal you heat up red-hot give her a little smack and take a wet rag and start from the outside and work your way in in a circular motion accurate gets rid of oil cans and it shrinks the metal I'm 63 now no clue how to lead well I know how to do it but yeah it's a long time ago never done it since Auto Body School enjoy your videos thank you I learned a lot
@jameslewry2950 Жыл бұрын
G,day mate, you are in the flow of the build now and you don't disapoint. This why I look forward to your videos, I would say you must inspire others to have a go. Hooroo see you later
@nederpiet Жыл бұрын
That panel at the rear, Scott from Cold War Motors was working on a similar panel on a Rover, recently. In a video called " Well, That Escalated Quickly..." first he tries to repair it, but 15 minutes into the video he decides to make new one. You might want to have look how he hammers it out.
@alanpaulick7815 Жыл бұрын
Wow Brent with a chop here and a bang you really getting her into shape. This is a great build and looking forward to the next video. Thanks for sharing your laughs and the video.
@damianjackson9084 Жыл бұрын
This is turning into awesome little coupe
@JonDraeger Жыл бұрын
Amazing proportions yet again!
@pierrelataillade7564 Жыл бұрын
Well well....... Big brother! I was pretty much against the big cut at the rear to be honest. But as usual I bit off all my fingernails until it was done. Wow what a process. In a way I've said from the biggining that you were way out ahead of us. obviously you had a vision and you basically developed it right in front of us... All I can say You the man... Bad ass.. wow..
@pierrelataillade7564 Жыл бұрын
Thanks....
@vintagetinrandykehler4824 Жыл бұрын
You're getting the 35 Ford vibe going, looking good!
@jakespede8522 Жыл бұрын
This was pretty ballsy....I really enjoyed watching you work thru the fabrication. Sausage making at it's best!! I Like It!
@johnhouseholder7682 Жыл бұрын
Love how you shortened that tail end,really anxious for that roof line to trunk transition.hey to Pablo best shop dog and test drive assistant.thanks John from Arizona
@eustolioramirez2955 Жыл бұрын
I like how your making it look
@davidsolloway9349 Жыл бұрын
Good choice of music. You are absolutely fearless in your design and fabrication...really taking a nice shape.
@abcsteve Жыл бұрын
Oh man! That looks slick! Shortening up that rear end was a great move!
@JimBosGarage49 Жыл бұрын
I love the way this car is turning out. I would buy if I could lol. Just looks awesome already and I’m looking forward to what it will look like done. Great job and thanks for the education I’m getting.
@kevrymell6636 Жыл бұрын
Looks great as does all of Brent builds, a true visionary in metal
@leecornelius1424 Жыл бұрын
That top and the shortened rear makes me think of the model cars I built as a kid cars going to be cool when done
@1208bug Жыл бұрын
You have a way of making it all look easy, Thank you for taking the time to demonstrating HK!
@blairredmond3246 Жыл бұрын
I am always impressed with the creativity, resourcefulness and skill that you show in all your projects. The 33 to 36 Ford 3 window coupe bodies were the same length as the 5 window coupes but the 3 windows had doors that were several inches wider and quarter panels shorter by the same amount. All the best!
@paulblack2402 Жыл бұрын
We’ll done Brent. It sure looks different now with that chop. Keep at it !!!!
@allanimalstaxi Жыл бұрын
The car looks really great, you just keep bringing old stuff back to life and saving it, making beautiful hotrod car art. Even Pablo loved it dancing in the snow on a great day in the shop. Take care Brent and have a great day.
@launceherron Жыл бұрын
Awesome
@anthonymessina2834 Жыл бұрын
I love Pablo's "we're going into the warm house and see mom" dance!!! Too funny!!! The coupe is coming along very nicely! That shorter hind end looks great!
@paulvanhouts3365 Жыл бұрын
As you talk about the shaping of that roof corner I was thinking of Karl Fisher as the go to on his use of the English wheel and panel shaping. I would love to see how you both would attack this metal collage dodge. It’s very entertaining to accompany you on this journey. The car is starting to come together, piece by piece. You certainly have a great attitude and passion for this kind of project. Keep up the good work.
@geoffreymills9932 Жыл бұрын
Now that's the look, what a cool project and the lower window is gonna be spot on, I'm diggin it Brent lookin good
@MrSparks54 Жыл бұрын
Your vision for Frank'nDodge starting to look righteous Brent. Cheers from Utah
@daleolson7205 Жыл бұрын
Personally think you nailed the profile on the body with the shorter rear body. Watching this reminds me of the Pontiac coupe roof.
@robertbennett9243 Жыл бұрын
I LIKE the shortened look better. It will be killer when its running down the road. Thanks for having us on the journey (s).
@rescuedandrestoredgarage Жыл бұрын
I believe your vision is starting to come alive, brother. That is a lot of work, man. I so hear you on how to know and read what the metal wants to do and know how much shaping you can do with the metal.
@rickhettwer854 Жыл бұрын
She is definitely looks like a 3 window. love it Brent!
@mikeramirez913 Жыл бұрын
Thanks!
@briankinnear7461 Жыл бұрын
Really nice work. Lessons learned are always a good thing. Look forward to to the next one and the roof getting finished. Be safe and stay well.
@tombrenes2411 Жыл бұрын
Excelente work Wonder how many fabricators said no way Your lines flow glad I shook your hand at moon eyes show years ago b4 u tube Love all the hard work Hey
@timothynewkirk2654 Жыл бұрын
I sat fill the holes in Firewall. It has lots of original CHARM. ALSO I'd run rear fenders with open wheel front w/ no hoof, maybe little fenders that turn with the wheels. OLD SCHOOL HOT ROD / CUSTOM LOOK! Dig how body turned out --- IT LOOKS FAST. Yours, Newk from Kentucky
@ianhamilton6092 Жыл бұрын
Well you always amaze me with your get her done attitude . I was hoping you would lay the back window to the same angle as the curve of the B pillar, but didn't want to comment till you were past that because you are the artist and I'm just the gallery.
@stucook8622 Жыл бұрын
I thought I liked it with the longer caboose on it but you're right it looks way better this way. Thanks for the great video Brent 🍺🐾
@gerryhartung736 Жыл бұрын
Vision, craftsmanship, truly a winner. Perfection in design!
@davidsantos8206 Жыл бұрын
Pretty darn incredible, watching your thoughts come to life. And I would bet that your time as a metal fabricator would be worth a lot of money to a lot of people, if you ever decided to do this for a living.
@vernecunningham5341 Жыл бұрын
I love it,I can not believe how fast you can do this work.This is a real joy to watch , I,am reliving my life through your talent, Thank You for great work
@rockymason7695 Жыл бұрын
You need to learn how to shrink sheet metal with an oxy acetylene torch. Neutral flame bro.!!
@WestHamBubbleBoy Жыл бұрын
Watching you build this car reminds me of those Hammer House of Horror films I watched back in the 1970s, Frankenstein's Monster. What a lovable creature he was, and I'm sure your creation will be even better. A good job well done, I say. I can't wait to see the end product. ⚒️
@ralphhammond8398 Жыл бұрын
Hey Brent, shortening the body made a big difference in the overall look of the car, I couldn't see it at first but it came out nice. I watched the entire General build and this build has my interest completely. Nothing seems to slow you down, you have a great attitude for this kind of work, nice job...Ralph
@jimternet382 Жыл бұрын
Process is really turning out nice! I am like everyone else, waiting to see the end result! I know it will be epic! Brent, you pby can do puzzles, you are doing one now. You rock, God bless, jim
@tonywilliams9145 Жыл бұрын
Really enjoying your creativity on this build.
@chriswhite5846 Жыл бұрын
Hey mate your time means a lot to us watching it’s coming along nicely 🇦🇺👍
@lsnowy7758 Жыл бұрын
Karl needs to have a reciprocal visit and give good advice in shrinking. That would be brilliant!
@darrenbrisson4336 Жыл бұрын
He says he doesn't use it much
@blackbuttecruizr Жыл бұрын
Looks so cool, keep it up!!! Love how excited Pablo is. 💕💕💕
@jamesbergeron8356 Жыл бұрын
I have to say that before the roof was patched up I was having my doubts, but Brent you really pulled it off. You have to call this car Frank.
@kevinrein7853 Жыл бұрын
What a cool car its easy to forget where you started.
@jgwilliams5951 Жыл бұрын
Looks just right ! Well done , Thanks for sharing
@DavidJones-hl5om Жыл бұрын
Brent and metal working 101 you go Brent
@briangriffin4334 Жыл бұрын
Looking more like a gasser every episode!!! Loving it👍
@g.o.b.2558 Жыл бұрын
A Gasser would be awesome 👌
@Goliath190 Жыл бұрын
I’m amazed by your work! Haven’t missed a video!
@michaelbristol6467 Жыл бұрын
Looks great Brent ! Pablo's ready for dinner. 👍😁✌
@billyblech Жыл бұрын
Hey Provi the roof is perfect.And trimming the bodylooks very good.What a lot of cutting and Welding. Män .The end result will be great i think. Iam looking forward to the further contents. And all good for you.Ernst🕵♂
@rickaser2383 Жыл бұрын
Was not ready for the better look of the shortened rear end; huge potential for a FUBAR event. Looks really good and the compound curves for the roof C pillar look great.
@CherryFlavoredClorox Жыл бұрын
Hey Brent, I think it was pole barn garage that did a playing card headliner. They got a bunch of different decks of cards, glued them to the lid and polyurethaned over it all. It turned out pretty well and I’ll bet it would look cool in this one. Just a thought. Keep on keepin on
@robertbiggs4934 Жыл бұрын
What a challenge this one is Brent! However, nice job of "plowing through" to achieve great results. Really enjoying this content...thanks!
@johnkranz4004 Жыл бұрын
Brent good choice moving the back forward looks Great
@dennisjones1642 Жыл бұрын
Hi again Halfass Kustoms Brent from here in the D Michigan hey Thanks for your time and video of looks like it's shaping up to be a great Street / Rat Rod ✅🤩👍🔥😎
@rscruiser3533 Жыл бұрын
Looking Good ----- Make sure you are taking a lot of pictures to put into a Scrapbook ------ So, when you enter it into the Riddler Awards --- you'll have the Before and After --- and you'll just BLOW the competition away!!!!! ------- Rodney
@stevearroyo9076 Жыл бұрын
I have to say Brent, you are a way more daring then I! I don't think I would ever attempt that much chop..... It would never line up again lol 🤣. You are a true master of your craft my friend!
@HogshooterHotrods Жыл бұрын
That made all the difference, thanks for doing this build, it is very motivating to see so much altering the car to get the look you want!
@SeansNewWorld Жыл бұрын
The more I think about it your English wheel would have been a better choice for making the sail panels for the roof. But hey persistence paid off! I'm loving this build.
@ronaldfarmer1208 Жыл бұрын
Looking Great ! !
@dtstarlingfarms1245 Жыл бұрын
Well that just brought the car right together.... Nicely done👌🏻
@rickfox6995 Жыл бұрын
Too cool, love the fab work.
@floydbecnel3434 Жыл бұрын
WOW!!!! What a beautiful build . Would look great painted red. Does Iook like a Ford. You are a great artist.
@kenfrazier616 Жыл бұрын
amazing talents, sure looks a %10000 better bring the rear half forward and blends great. Looking forward to seeing the next one
@terryeustice5399 Жыл бұрын
Great job of fabrication. On this build. No worries it’s going to be great. Just hit the wall and stumbled. Now I think you got it back in control. Thanks for sharing! ❤️
@rickbarger5161 Жыл бұрын
That looks way better Looks like a 33 hot rod should look If you're going for the low and slow look stretched would look cool
@johns9993 Жыл бұрын
Yes Brent that look's RIGHT !! Bondo to smooth and finish ,modern day lead !!
@bstoryswett2302 Жыл бұрын
Door opening, roof fill and shortened rear combine for a 40-41 Willys Coupe B-pillar, rear quarter vibe.
@randybourdon2791 Жыл бұрын
Shortening up the back made the difference Brent. Really looks cool.
@Zenny_6969 Жыл бұрын
...coming along nicely, Brent.....I am really enjoying watching you do your magic.....
@tonylang7526 Жыл бұрын
WALKING AROUND TO THE DRVRS SIDE!!!!! THE CATASTROPHIC GRIZZLY BEAR GNASHING DAMAGE TO A CAMPER'S HEAD IS WHAT a reconstruction surgeon would see and have faith in fixing -- u both work miracles!!!
@robertmccully2792 Жыл бұрын
Your a unique builder, better than any TV show,, the longer the video the better. Metal is Metal.
@seafieldgrant6957 Жыл бұрын
Good stuff thanks for video
@DennisMurphey Жыл бұрын
Oh yeah slow start then a break through, slide the rear forward 5 or 6 inches Bingo! You nailed. There is now proportion in the sides and shapes. It looks balanced and equal. Great eye for that stuff. Now we got a three window. D
@donphilbeck5163 Жыл бұрын
Best channel on KZbin! Love your work and drive to get things done as simple as possible.
@momdad8771 Жыл бұрын
Looks good..like the shorter body…but I liked it better with the long rear..