You want some input on the headlights , you should ask Durrrrtymax Jack since he's done a couple of sets of headlights
@willknight65694 жыл бұрын
He’s probably already talked to jack, they’re friends lol
@szachtb4 жыл бұрын
@@willknight6569 than why did he heat them as opposed to cut?
@willknight65694 жыл бұрын
szachtb you can do it either way jack even said that in his video that you can heat them up or cut them
@szachtb4 жыл бұрын
@@willknight6569 followed by cutting them because no one wants to clean or deal with separating them cause they break. Lol
@ssteezybreezyy44794 жыл бұрын
Wait guys ryan didnt upload at 4am this time whatttt
@self_made-self_paid21434 жыл бұрын
Man you got it going on but just a quick tip, Try to make video's longer. Also try to atleast complete 1 thing in the video, It seems this build is getting dragged out and I understand about shipping and all but.........Just my 2 cents. Keep'em coming though!
@smcox19914 жыл бұрын
Gotta milk it for everything it’s got. I normally skip to the end to see if anything got done and if nothing happened I closed the video. Just like this video.
@michelleparrott21634 жыл бұрын
His videos have sucked lately, nothing gets completed but his long ass ramblings.
@emerickbrochu60084 жыл бұрын
10:38 I think that you are struggling a little ahah
@cjhlighting4 жыл бұрын
Best way to get the permaseal out is a flat head screw driver and a razor blade and just scrap away. Heating them back up will help some, make sure you get all of it out or you will have leaks!
@BryanLeach4 жыл бұрын
Can't wait to hear your opinion on install/quality/function/features on the AMP power steps Vs the RBP power steps on your RAM.
@brentregiste14924 жыл бұрын
I’d like to know also
@dkoko73134 жыл бұрын
Warranty Voided....lol. did you happen to check the lights before you took them apart to make sure they worked? Just spent the last 2 weeks and a dozen emails back and forth to TRS on my new Morimoto XB headlights. I had issues with the passenger side from day one, and after a new laptop, and forscan, and research, that non proved to work in my case, turns out the headlight was bad.... just mentioning incase you happen to get a faulty light before you tear it down incase it needs replaced
@williammcclung67244 жыл бұрын
Just want to say Ryan that I love these videos favorite on yt right now and keep the uploads coming!!! Can’t wait for the Tahoe lift
@camwiththeram5354 жыл бұрын
My alpha novas are so bright makes me feel safe at night knowing I can see so well we even made a comparison video vs the morimotos
@JWMontoya4 жыл бұрын
Agreed! Alpharex 👍
@MrJMagoo4 жыл бұрын
Nice jobs on head lights. Maybe for next set of lights use plastic pry tools to lessen chance of breaking, bending or distorting the edges.
@carenthusiastlifestyle29504 жыл бұрын
I think that proper headlight sealant is called Butyl, check into that tho, but I think it is🙏🏻 continue to inspire us
@mattburke53564 жыл бұрын
love the Tahoe build man, just bought a escalade. and your giving me so much inspiration on my build and its already coming to life
@BorninVirginia4 жыл бұрын
11:31 distracted easy?
@SanDiego_VDubLife4 жыл бұрын
Hey dude I just wanna say props for your videos. Love watching them. You must be so busy. Not sure if this is what you do full time as a job or if you also work. I’m not even into big trucks like the ones you have but I love cars. I do have a Tacoma that I work on and am in the process of fixing up. Nothing major but I do get inspiration from your channel so we will see what happens. I may even try to tint my windows and maybe one day powder coat stuff. I have two old Vdubs that I also wanna fix as well so I could totally powder coat so many parts. Oh and ps I just got access to some dope video equipment so hopefully my videos will improve like yours.
@mopar_shawn9394 жыл бұрын
Cant wait to see the rims on the tahoe. I have a suburban the same color i want to lift and go 22x14 on 35s.
@bigsteppacreations77754 жыл бұрын
I love how you actually show the whole proses in one video not like other KZbinrs that do it In like 5
@collincorless30524 жыл бұрын
Those are definitely unique Tahoe headlights but very cool looking
@colton73734 жыл бұрын
that fridge is loaded loollll
@atcdan1334 жыл бұрын
I like your Baker pic above the can. Go Browns. Tahoe looking great.
@larrysears12074 жыл бұрын
Brooo the tahoo is flipping dope
@Howlingwolf-se6hk4 жыл бұрын
Let’s goooo! Notification squad 🙏🏽
@Blacked_OutMedia4 жыл бұрын
Believe me my 04 Yukon’s aftermarket headlights have the same amber on the side and the rest of it is blacked out but they legally have to be like that it’s a DOT requirement
@AntonioPerez-ju1vj4 жыл бұрын
Dude hope to meet you one day love all your work my huge inspiration right there
@unapologeticallypatriotic38534 жыл бұрын
Red eyes in all those projectors would be sick
@augustowen29054 жыл бұрын
Keep them coming love the videos
@lbhamlo4 жыл бұрын
I used a stiff putty knife, worked great removing the headlight seal and did not damage the light housing.
@chickendinner15634 жыл бұрын
Was wondering where you got your headlights for your Silverado 1500 build ?
@ryan25464 жыл бұрын
eBay baby!
@classyjeremygaming4 жыл бұрын
I love how u build ur own stuff and do all the work to ur trucks makes me want to do my own work
@korn1116854 жыл бұрын
I wasn’t a fan at first but you guys are growing on me. I’ve really come to appreciate how you layout and present your projects. Kudos!
@korn1116854 жыл бұрын
Grizz 2 it wasn’t against Ryan, I was avoiding watching those who may be leveraging debt to buy a lot of things, especially vehicles. Buy Ryan’s a cool guy. His wife is also at it, they’re bright and I enjoy their content. It’s 10,000x’s better than TV, fake news and most music these days. So I support people like Ryan, goonzquad, Vtuned etc because I enjoy their work.
@JDLC954 жыл бұрын
“I really do not like the look of these one bit......let me get these out, these look gnarly already!” So you like them...? Lol
@lifewithrobb1784 жыл бұрын
Curious as to why you ordered amp power steps instead of rbp
@kiabass87984 жыл бұрын
Your content is some of the dopest videos ive seen you deserve 700k subscribers
@dylanlandon24414 жыл бұрын
You can add more metallic by mixing some “clear sparkle” in with the “clear vision” looks goon on the illusion purple, illusion green, and illusion blueberry (they’re the only ones I’ve personally tried, can always try it on a test piece or tumbler)
@LIFEOFZAYE4 жыл бұрын
Big noti gaaannnngg
@darrencajka88722 жыл бұрын
So, used this video to help me do my SHO headlights and i noticed mayfield picture in the back. I bleed orange and brown since '74. How you feel about Deshaun trade and Mayfield situation?
@tj_jam23774 жыл бұрын
LETS GO, SO HYPED FOR THIS BUILD!
@kiabass87984 жыл бұрын
Happy sunday bro
@danielturko12784 жыл бұрын
Heat gun works great on the permaseal ive used it lots on many headlights
@blakemiller49044 жыл бұрын
Are you still going to Dayton? A couple buddies and I are going down that weekend and would love to see the Cummins.
@exploringpeco4 жыл бұрын
Watch flyride he does only custom headlights and led lighting but he is a professional and you can message him about lights and how to do them without damaging them by too much heat!
@RICARDOGARCIA-wr9hx4 жыл бұрын
I would just leave them I got them for my 2012 GMC Sierra there crome with the yellow corners to much work.
@dirtbike44424 жыл бұрын
I love the Tahoe
@samcarpenter48624 жыл бұрын
Did it make the headlight lenses soft in the oven
@mishammer96984 жыл бұрын
Get going on ur wife truck lolol
@cadilakisrodcustom4 жыл бұрын
When I color matched my headlights, I used a pick set to get the majority of it off, then used acetone to get the rest of it.
@scottwacha59004 жыл бұрын
Love the content ! What are your thoughts on SEMA? I kinda thought the Tahoe was going to be a SEMA build? Maybe I’m way off. ?!
@mikepower90464 жыл бұрын
Cool video
@hillbillydelux754 жыл бұрын
Always great videos !! Keep it up .
@jeffcoker484 жыл бұрын
Witch hazel works best
@a10warthog754 жыл бұрын
Ryan that is really awesome how you got those headlights apart 👏
@winstonjessop22244 жыл бұрын
I know the shipping is slow, I ordered my lights from carid.com a month ago and still have not seen them
@roquemonteleone44284 жыл бұрын
U should do demon eyes in the projectors
@JaredisOutdoors4 жыл бұрын
PLAY CLOSEEEE ATTENTION lol
@kerrfu4 жыл бұрын
Hellz Yeah, lets see lets see! bro..... you got me feelin like a female right now when they say "that was it?" "your done?" lol j/k I've never had that told to me lol But I paused the video to get popcorn and a beer, thinkin there'd be more content; You got me at that level of frustration not wanting to wait till next week for the next episode of "Keeping up with Ryan Mayer" lol I'm just talk shit but I still can't wait... keep up the awesome work dude
@michaellangerman46154 жыл бұрын
You can order the sealant off morimoto.com just a heads up.
@itsjusttcarr4 жыл бұрын
Awesome videos like always and keep up good work
@williamadams70224 жыл бұрын
Basement kitchen?
@arevalo87894 жыл бұрын
I’ve done retrofit headlight on my ram, baking them while they’re apart will help get the perma seal off along with a razor blade and some curse words 👌🏼
@ryan25464 жыл бұрын
Hahahhahaha
@Clitcommander69694 жыл бұрын
Bruh why in the actual fuck would you spend $980 on some headlights that you are planning to cut open??? You could literally buy the eBays for 100 bucks and switch out the leds with better quality and paint them and you’d have THE SAME EXACT finished product for around $300 bucks.....smh
@harveyr25464 жыл бұрын
Best place to get powder coating colors
@ryan25464 жыл бұрын
Prismatic baby!
@devinbaker85204 жыл бұрын
Please do a big Soundsystem in the Tahoe
@MichaelStMarie4 жыл бұрын
Maybe you could try to color match the reflectors instead of just painting them black
@aaronpodgorski16174 жыл бұрын
Denatured alcohol or acetone will break down the sealant ..
@kylerbyassee64334 жыл бұрын
Love the vids keep it up
@smokeyjoe40604 жыл бұрын
Check out flyride he did light builds for a living.one of his videos he said never use screw drivers or anything along that line.and says you dont have to worry about getting the old retro rubber butyl just put new on and it will all reseal when u heat it in the oven.
@MasonTLyon4 жыл бұрын
Pay close attention not play🤣
@fabiandelgado73214 жыл бұрын
On the lens I peel off and on the housing I use a flathead screwdriver
@gavinw41654 жыл бұрын
Acitonework good to get the permatex off
@slscout4 жыл бұрын
It's summer.. Take the rest of August off and enjoy your cars. Spend time with your gf. KZbin will be here. Burn out is real and you are starting to look it.
@cantstopwontstop9764 жыл бұрын
Heat gun to get the seal out
@TaylorMade6784 жыл бұрын
That’s crazy that’s the same color I’m powdering my McGaughy’s 7-9
@christophersims21254 жыл бұрын
You’re gonna need Acetone to remove the permaseal.
@tjboylan204 жыл бұрын
Second like possibly first comment I love the channel I’m waiting for the next build already
@pleco6524 жыл бұрын
whos porsche was that in the back
@reggie_m454 жыл бұрын
Did I miss the part where he cut into the headlights?
@danbango79484 жыл бұрын
$1k for lights with a Volvo style Thor's Hammer design and a fuck ton of projectors? Lmao oof
@Kingbuzz924 жыл бұрын
The headlights are a pain in the ass lol
@cw777_customs34 жыл бұрын
I painted the factory headlights on my f150 and had trouble getting the factory sealent off so I said f**k it and just warmed up the old sealent and put some fresh silicone around the lens before I put it all back together. been almost 4 months with no leaking or foging up
@ryan25464 жыл бұрын
👀👀👀
@hillbillydelux754 жыл бұрын
Why not rbp steps ?
@ryan25464 жыл бұрын
They don’t have them :/
@tylersowell2214 жыл бұрын
i heard he wears the same lftd shirt everyday 👀👀
@anthonylopez17064 жыл бұрын
Why you say Tahoe like that
@gmcz71314 жыл бұрын
Hey Ryan what would you sell me the factory headlights for?
@southpawsgarage4 жыл бұрын
PAY CLOSE attention....LOL...
@eddietrent30394 жыл бұрын
More of Katie Kae
@porsche94419874 жыл бұрын
Ryan, hey man I am a local Ohioan and I just bought a 2013 Ram 1500 HEMI to pull my Viper to long distant cruises like tail of the dragon and etc. I want it lifted like yours but not as height but kinda high. Would love to maybe get together or just talk about my first step. I am an old fart and this believe it or not it’s my first truck. Thanks man! I am on FB under Chester Copperpot if you want to DM me.
@joebechill54914 жыл бұрын
Durtymax Jack dose his own headlights all the time check him out if you wanna see the cool ones he has done.
@broganwhite14424 жыл бұрын
Yuhh noti squad
@erivaldoortiz87954 жыл бұрын
🤟🏻
@andrewkirwan5174 жыл бұрын
why do your own merch? Get involved with Bunker Branding like real youtubers do.... tons of people with millions of subs have Bunker branding do it for them.
@crewzero35864 жыл бұрын
I'm sure Matt would love the extra business lol
@robertoramos2914 жыл бұрын
U should watch @flyride channel
@gspadez4 жыл бұрын
Milwaukee
@junioro9074 жыл бұрын
😎
@courtbaldwin19864 жыл бұрын
I’m playing attention #LFTD
@honortuck3r584 жыл бұрын
First
@michaellangerman46154 жыл бұрын
Sorry retrofitsource.com
@user-cy5ol3xl5y4 жыл бұрын
PAY CLOSE ATTENTION
@laynewaldron82144 жыл бұрын
Wassup
@malloryvice42254 жыл бұрын
I know shipping is slow but you could’ve done the headlights and steps both in this video instead of dragging the videos out and talking 95% of it.
@juliomong80874 жыл бұрын
Hey if your selling your headlights for a good price I'll b interested, I have an avalanche that I want to do some custom headlights on, let me know where I can send you my email
@collincorless30524 жыл бұрын
How big is your house, in videos you keep showing more and more rooms that your house doesn’t even look lik it has